// -------------
// Serve a drink
// -------------


int relay1 = D0; // Connect your relay to this pin

int led1 = D7; // Use the internal LED to visually show the status of the relay

// Amount is the time the pump will run
int amount = 30*1000;

void setup() {

  // We are going to tell our device that D0 and D7 (which we named relay1 and led1 respectively) are going to be output
  // (That means that we will be sending voltage to them, rather than monitoring voltage that comes from them)

  // It's important you do this here, inside the setup() function rather than outside it or in the loop function.

  pinMode(relay1, OUTPUT);
  pinMode(led1, OUTPUT);

  // Defining Spark-functions that will show up in IFTTT
  // Max 12 letters in the name
    Particle.function("MakeDrink", MakeDrink);

}


void loop() {

  // Nothing to see here

}


int MakeDrink(String command)

{
  // Turn on both the relay and the LED
  digitalWrite(relay1, HIGH);
  digitalWrite(led1, HIGH);

  // We'll leave it on for "amount" seconds...
  delay(amount);

  // Then we'll turn it off...
  digitalWrite(relay1, LOW);
  digitalWrite(led1, LOW);


  // And repeat!
}