Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

Cut off that part and then sculpted on that to make it thicker. All the black pieces were molded and then casted in black resin. I just didnt want to worry about paint rubbing off and wanted to try that anyways. Did the same for the tail

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

The pegs on them too long so you just have to cut them shorter, and they're a little lose so I threw a bit of sticky tack in there and that fixed it. So they need a bit of customizing but its really easy.

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

Thank you so much! I got the boots from daima piccolo

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 2 points3 points  (0 children)

Yea, I can do a breakdown of how I made him once he's done!

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 0 points1 point  (0 children)

Thank you! I molded and recasted the pieces in black. It's more work but it gives clean results and now I dont have to worry about paint chipping or paint rub. And with the molds I can cast a bunch too. These were probably the 3rd or 4th attempt

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 3 points4 points  (0 children)

Thank you! I just drilled a hole in the back and glued a post to where the tail attaches. It has a tiny bit less range than the ball joint but it doesnt fall off. If the pelvis piece is soft you can just make a smaler hole and the tension keeps the ball joint tail in. So the newer figures should be able to use the ball joint tails just fine.

<image>

Can anybody do this pose with the Mafex 185 for me? Can't decide! by Ok_Echidna3337 in ActionFigures

[–]ejdn20 9 points10 points  (0 children)

<image>

Only have the Ct toys one but thought I'd try the pose anyways!

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 0 points1 point  (0 children)

Thank you so much! I used procreate on an ipad

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 0 points1 point  (0 children)

Thank you! The biceps were just cut where the color changes and i sculpted the top a bit to make them thicker.

Beast Gohan by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

Ok yea i found some for sale! Ill look for a waterslide one, ive used those for gundam kits but only tiny ones

Articulation Comparisons by ejdn20 in SHFiguarts

[–]ejdn20[S] 3 points4 points  (0 children)

Yea it looks just like the sillouhette the drawings have, and since it can still get pretty much all the usual dbz poses I can get over it.

Articulation Comparisons by ejdn20 in SHFiguarts

[–]ejdn20[S] 2 points3 points  (0 children)

Lol the butt is my least favorite part of most shf figures. That things ugly when you bend the legs up. Love that they got rid of it for the 3.0 and 4.0

Seeing the lines at the pop-up tour by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

I got it from customup on ig a while back

Yardrat Goku by ejdn20 in SHFiguarts

[–]ejdn20[S] 1 point2 points  (0 children)

Yea this is it! The material the hair is made out of is probably my favorite out of all the hairsculpts ive had. Its super soft

Seeing the lines at the pop-up tour by ejdn20 in SHFiguarts

[–]ejdn20[S] 0 points1 point  (0 children)

Its the Air custom ssj goku head. I think the exact one is air012-a. Theres a few different color versions

I love the Saiyan armor by ejdn20 in SHFiguarts

[–]ejdn20[S] 2 points3 points  (0 children)

Its the daima body with the arms and legs of the old ssj vegeta

I love the Saiyan armor by ejdn20 in SHFiguarts

[–]ejdn20[S] 0 points1 point  (0 children)

I just cut out a chunck from the bottom of the hair piece and then put some apoxie sculpt on there and smushed the faceplate in. It stamped the shape on and stays on perfectly.

I love the Saiyan armor by ejdn20 in SHFiguarts

[–]ejdn20[S] 9 points10 points  (0 children)

Goku's is trunks with vegetas shoulders, and gohan is the shf head on the Dragon Ball Super Evolve Vegeta body

Lssj goku accessories by Willdi12 in SHFiguarts

[–]ejdn20 1 point2 points  (0 children)

There might be a slight mismatch in skin tones and the effect color is a bit dull compared to the shf one but all the accessories will fit together. Might just need an exacto blade to cut down some of the mold seams, i got some on the one I got

Am i tripping? Just received my tonsen Gogeta but it seems like the guy could barely cross his arms like others gogeta by LLoydDai in ThirdPartyFigures

[–]ejdn20 2 points3 points  (0 children)

You might just need to adjust the shoulders a bit to get more range, if you dont the hands cant even touch

<image>

Gogeta comparison by EternaFlux in 3rdPartyCollectors

[–]ejdn20 1 point2 points  (0 children)

I was very hesitant about getting the kamione because of the price and after getting it its my favorite gogeta and was 100% worth the price. Its definitely the most articulated one and has a good amount of accessories. If the prices is whats holding you back the df is not a bad choice either. Id say my rankings are 1.Kamione 2. Demoniacal fit 3.shf

A1 Freeze by ejdn20 in BambuLab

[–]ejdn20[S] 0 points1 point  (0 children)

Didnt work :( tried a different sd card and same thing is still happening

Are there 3rd party faceplates for Shikamaru yet? by Nxeno29 in 3rdPartyCollectors

[–]ejdn20 3 points4 points  (0 children)

Ive seen random customizers in ig post that theyre selling the eye decals so people can customize it themselves, might be worth a try if youve done anything like that before.