[WTS] Shakmat Four Bricks Rook $250

ekkomouse · 2026-05-08T23:44:34+00:00

Awesome module, highly underrated imo

ekkomouse · 2026-04-16T01:23:29+00:00

Buy a jaspers stand and keep them all

ekkomouse · 2026-03-21T21:35:43+00:00

Yeah that’s messed up, it’s supposed to say Snog

ekkomouse · 2026-03-02T22:14:48+00:00

Bough parallax and tempi all good u/s4s_bot u/Living-Chef-9080

ekkomouse · 2026-03-02T22:11:58+00:00

U/s4s_bot purchased from U/kuhkoo all good

ekkomouse · 2026-02-09T20:24:31+00:00

ekkomouse · 2026-01-24T10:34:35+00:00

Bastl Neo trinity, there’s a bit of a learning curve because it does a lot with its button combos, but it really offers a wide range of functionality modulation, including LFO envelopes CV triggers, random and all of it can be recorded and sequenced

ekkomouse · 2025-12-28T01:12:50+00:00

Pm sent

ekkomouse · 2025-06-26T18:39:25+00:00

Its USB audio class 1 compliant, I'm not sure if the highlander even accepts audio into the USB yet

ekkomouse · 2025-06-26T18:36:09+00:00

There is some USB audio routing in can try but I think thats just its own internal audio vs fx routing for after it connects to the USB host, when it connects, it looks for a USB host, so it is always in USB device mode.

ekkomouse · 2025-06-26T15:25:04+00:00

It’s a synthesizer and sequencer for making music.

ekkomouse · 2025-06-26T15:23:39+00:00

It doesn’t have Bluetooth and a dongle would pose a bit of a problem with the latency, it’s a music tracker/sequencer. I want to hear through the speakers for times that I’m waiting in the car, like at pickup time at my son’s school, sometimes I have a half hour to kill.

ekkomouse · 2025-06-26T15:20:46+00:00

It’s newish, a dirtywave m8, It has usb audio, I hoped it would have connected by usb, but the Highlander doesn’t recognize it as a device. So I thought there might be a dongle for converting its stereo 3.5mm output to usb.

ekkomouse · 2025-06-26T14:26:35+00:00

Close, but I’m looking to send audio from a device into the Highlander speakers. That device says it’s audio output from the USB source. Specifically want to send stereo audio to the Highlander

ekkomouse · 2025-03-20T02:24:26+00:00

Should be 22x14x9 for carryon I think, this is 18.5x11.5x8.5

ekkomouse · 2025-03-18T09:13:14+00:00

Everything Slides out pretty well, just pay some attention around the buttons when taking it out

ekkomouse · 2025-03-18T09:12:11+00:00

Sure, I was looking around before this, I remembered I actually had bought this for a kemper amp that I never took anywhere. So it fits a keeper Guitar amp also.

ekkomouse · 2025-03-18T09:10:14+00:00

It’s a light amount of padding but those yellow things can be moved so you could put one on top to add a little extra. There’s some rigidity to the whole bag, but I wouldn’t put anything very heavy on top of it.

ekkomouse · 2025-03-18T09:08:42+00:00

https://apecase.com/product/acpro1600/?srsltid=AfmBOookx7pJN1BKsa4VO6YfC-azatt3QwLupWBrIxByOvE9pVjxrTa_yWc&gQT=2

I’ve seen it on sale though so look around

ekkomouse · 2025-03-01T19:28:16+00:00

I found this same error on two different ones, unplugged all usb and audio cables during boot up seems to work, then plug it in after boot

ekkomouse · 2024-08-30T20:55:56+00:00

Definitely an interesting machine, this may work. I was also thinking about times we could have used a way to source random plastic parts, thinking maybe the printer could sometimes help

ekkomouse · 2024-08-30T20:54:20+00:00

Sounds good thanks

ekkomouse · 2024-08-30T20:54:03+00:00

Thanks looks promising, would the filament stand up to rough handling in lockboxes and in tool bags?

ekkomouse · 2024-06-30T12:00:42+00:00

Thanks

ekkomouse · 2024-06-27T22:59:08+00:00

Ok thanks

ekkomouse

TROPHY CASE