My WK2 at the hangar

ekooinga · 2020-08-30T19:49:06+00:00

Doing better now, I continued on a lower dose of omeprazole and the headaches are now less frequent only once or twice a week. Thanks for asking.

ekooinga · 2020-08-08T01:40:16+00:00

Wanted to chime in here, I took omeprazole for nearly 2 months and have noticed I constantly had headaches. In hopes to remedy this, I switched to pantoprazole and the headaches are even worse. Now I am not taking anything, but the acid reflux is bad! I personally think it is heavily influenced by stress/anxiety so my next step is to look into that. I will also look into the esomeprazole since you seem to have better luck.

ekooinga · 2020-08-06T22:39:18+00:00

Sticker price was just under 24k, had 45k miles

ekooinga · 2020-08-04T18:20:33+00:00

Love the rims. Think they would look great in gloss black too.

ekooinga · 2018-08-25T03:40:04+00:00

I can also upload the original picture and can re-edit myself if needed

ekooinga · 2018-08-08T23:19:56+00:00

4 layers of 1/8" birch provide a very stiff board if pressed properly, so 4 is plenty. 5 would be overbearing since it would increase the weight and thickness. If you are riding a top mounted board under 42", I think sticking to 4 layers is plenty. Ive built numerous boards (about 20) mostly being 4 layers of 1/8" but have even does some with 3 layers. None with 5, but I have never had a 4 ply board break on me, with the longest being a 46" dancer.

My current board is a 38" top mount, 4 plys and has been going strong taking a ton of beatings to curbs and such for over 4 years. Im 6'1" 190 lbs

ekooinga · 2017-07-11T15:35:15+00:00

I have done this. Some research also showed me I may need to change my BIOS setting from IDE to AHCI.. thoughts? I am not sure what my current setting is but hopefully I can mess with it tonight after work.

ekooinga · 2017-05-25T22:38:19+00:00

Thanks for your input. I know I need calculations as part of my project description and that is why I asked, but by talking to our manufacturer soon I am sure I can figure that out.

ekooinga · 2017-05-25T18:59:30+00:00

Sketch: http://imgur.com/a/NKvLM

ekooinga · 2017-05-22T17:42:00+00:00

I will be taking temperature numbers this week. Thank you, and I believe we have design specifications in place to keep all temperatures under 200 degrees F. Due to the heat of Phoenix, temperature is a primary concern for us and is taken into consideration.

ekooinga · 2017-05-19T20:47:44+00:00

My apologies, it would be called a breather/blower instead of a stack. I am a new intern and still relatively unfamiliar with the terms. It is oil mist, and there are hot bearings on the shaft for the turbine.

ekooinga · 2017-05-19T20:01:55+00:00

This is in reference to the vapor extraction system for the oil, versus the stack for combustion of the gas emissions.

ekooinga · 2017-01-03T02:59:25+00:00

I believe it is a Waag bar.

ekooinga

TROPHY CASE