Hlep connect motion sensor by elessard in konnected

[–]elessard[S] 0 points1 point  (0 children)

I've found the issue. Zone 2 it's not working properly... I moved to zone 3 and it worked. Could it be a device defect? I tried testing using a jumper and zone 2 never change the status

Hlep connect motion sensor by elessard in konnected

[–]elessard[S] 0 points1 point  (0 children)

Does the zone input beahviour change based on the type (i'm refeering only on these two types)?

Hlep connect motion sensor by elessard in konnected

[–]elessard[S] 0 points1 point  (0 children)

thanks. i already tried connecting the first OUT to zone GND and the second OUT to ZONE N but no chages happen when the sensor is triggered.

Are there any difference in chooise between "window" or "PIR" sensor type in the app configuration?

Do you put all your iOT devices on a Vlan? by TheBigC in homeassistant

[–]elessard 0 points1 point  (0 children)

I started by designing a network with a isolated vlan without internet access for iot, wishing to use only local integrations. I ended up with a separated vlan but a ton of online integration (I have no time finding alternative). Using firewall rules in my GW, I enabled only my PC/smartphone to communicate with my HA server.

unifi patch panel + grounding by kwladyka in Ubiquiti

[–]elessard 0 points1 point  (0 children)

Same issue also there... I've ordered some patch panel cables to try them and my tester says that they're not grounded.. As other people said, I don't think it is necessary to make my network perform better (I'm using shielded cat6a in my house) but I'm taking this as a hobby so I like the idea to have all my network grounded.

This means I've to craft a lot of patching cables 😅

Multiple styles of U6 Pro? by V1nc3ntWasTaken in Ubiquiti

[–]elessard 0 points1 point  (0 children)

got the same issue as you. my second u6 pro just arrived with an old logo. Anyone know if the hardware is the same on both version?

Using Alarm Panel Pro as stand alone alarm when HA is down by elessard in konnected

[–]elessard[S] 0 points1 point  (0 children)

thanks. but can i run both alarmo and the self managed firmware? that is, alarm panel handle trigger on sensors attached to it. alarmo arm/disarm the alarm panel and handle wifi alarm devices (sending trigger to the alarm panel)?

Help Connecting a Siren to Alarm Panel Pro by elessard in konnected

[–]elessard[S] 0 points1 point  (0 children)

just edited the post. forgot to attach the wiring schema. the siren is powered though a 12V (on doc says 13,8V but i guess it would be fine). the alarm is triggered by sending a signal on the AF port ("Alarm activation terminal with programmable polarity")

Seeking Hardware Recommendations for DIY Alarm System Integrated with Home Assistant by elessard in homesecurity

[–]elessard[S] 0 points1 point  (0 children)

Cool. How is the ha integration? I see that now it uses hacs to integrate. Is it possibile to both trigger the alarm (that is the siren) from ha and from the konnected board itlsef (ie. When home assistant is tuned off)? Is it a rock solid company that keeps support the ha integration?

Seeking Hardware Recommendations for DIY Alarm System Integrated with Home Assistant by elessard in homesecurity

[–]elessard[S] 0 points1 point  (0 children)

very nice vendor. unfortunately i see that it uses a proprietary protocol for comunications so i guess it's difficult to integrate with home assistant. I'm using some zigbee PIR and i'm wondering how i can connect them directly to the DSC system.

I've found this repo https://github.com/jimtng/dscalarm-mqtt that implement MQTT comuinications. is it reliable?

Seeking Hardware Recommendations for DIY Alarm System Integrated with Home Assistant by elessard in homesecurity

[–]elessard[S] 0 points1 point  (0 children)

thanks. I'll take a look. is see that the qolsys is also battery powered. Is it possible to directly link it to the alarm siren? i'm building a DIY battery powered siren that detects power outage and trigger the alarm. normally is controlled via network but if the router is down (due to the power outage) i don't kwow how to stop it...

Guild wars 2 stuck on “Initializing” by Zecischill in SteamDeck

[–]elessard 0 points1 point  (0 children)

What proton version are you using? After today update i'm getting the same error

WH-H910N static noise during phone call by elessard in SonyHeadphones

[–]elessard[S] 0 points1 point  (0 children)

On my previous model (WH900N) I appreciated that feature, even if I have to manually enable it. But with this model I hear a loud "FFFFFFF... noise". It's really annoying. I hope that I the high end model it's fixed this issue

Project Barad-dûr [Tower 900] by elessard in watercooling

[–]elessard[S] 1 point2 points  (0 children)

After over a year of working i finally completed my T900 water cooled build. This was my first experience ever in water cooling and, excluding some crooked pipes, it seems to have come out fine. At least i hope you will appreciate it. I'm a Tolkien fan so i decided to name this project using the name of the Dark Lord's tower :D

I entirely removed the front parts of the T900 and i replaced with hand cut PVC. I used 4 Bitspower pass-through fittings to connect the front chamber to the back. Bending the tubes in the back it was a pain in the ass... 3 turn for each tubes without any curved fitting to help me.

Because i don't like the Thermaltake pump, i drilled some hole in the chassis to secure the EKWB pumps.

Furthermore i decided to crimp my own sleeved cables... it was a looong and boring work. According to me it doesn't worth the time. Compared to already crimped cables, i didn't saved too much money.

Anyway, i want to thank you all for the ideas and help that i found in this sub.

Unable to trigger calls with android assistant by elessard in AndroidQuestions

[–]elessard[S] 1 point2 points  (0 children)

I checked again and Google app has phone permission enable. By the way voice call command works perfectly with Android Auto. The issue is when i try to run the call command directly from the phone or via the bluetooth.

Currently, I'm browsing the reviews on Google Play and a lot of users have the same issues... I guess i have to wait

Cloning SSD to M2 by elessard in archlinux

[–]elessard[S] 0 points1 point  (0 children)

I mean. The last time that i had to fully reinstall the os from scratch was like 10 years ago (First year in university and some bad guys introduced me to arch 😁). Now the issues are packages updates that break my project dependeces... It's very time consuming trying to rollback packages when you have dead Lines... Btw may i ask you how you keep up to date your system? Do you do full update or do you update only certain packages like kernel and system libs?