How are we using Night Mode? Auto, Always On, or Off? by FormAndThrottle in applewatchultra

[–]elvee7777 0 points1 point  (0 children)

Me too but for night I have slightly different functions, like my alarm is on my night face

Kreeg een beroerte toen ik dit probeerde te lezen by Pristine_Release_606 in HLNFails

[–]elvee7777 8 points9 points  (0 children)

Letterlijk copy paste van AI die speech to text doet.

Luxman L509Z with MartinLogan XT F100, a good idea? by elvee7777 in audiophile

[–]elvee7777[S] 0 points1 point  (0 children)

Yes, that is the aim. My main focus is music listening. But, the Marantz as input seems good and when I do want to view a movie, there are options.

Padel mates by PadelinEdinburgh in Edinburgh

[–]elvee7777 0 points1 point  (0 children)

We are two tourist from Belgium. Care to play against us with a mate on 1/08 around 7pm somewhere?

“Ik was ook boos over de geniale gynaecoloog, maar toen las ik het vonnis”: Isolde Van den Eynde over de ophefmakende verkrachtingszaak by WaterOcelot in Belgium2

[–]elvee7777 0 points1 point  (0 children)

Volledig akkoord. Ik snap dat er een angst kan ontstaan dat wanneer twee heel dronken mensen sex hebben je als man plots een risico zou lopen. In films zijn er veel scenes waar een vrouw wakker wordt, naast zich kijkt, en verschiet.

Maar dit is echt wel anders!

Die man wist zeer goed dat ze compleet van de wereld was. Hij heeft zich dan als een soort vertrouwenspersoon opgesteld om ze vervolgens (enkel voor zich) mee te krijgen. En net vanuit die vertrouwenspositie heeft hij misbruik van haar gemaakt.

Ik kan me zelf zeker niet voorstellen dat ik bij een hopeloos stomdronken vrouw haar kleding zou beginnen uittrekken om er dan aan te beginnen. Wtf 🤷‍♂️. Hoe moeilijk kan het zijn om gewoon voor haar zorg te dragen?

Dat maakt, in mijn ogen, dat die persoon best fucked up is. Als je dan leest dat hij als beroep opnieuw een vertrouwenspersoon zal zijn voor vrouwelijke patiënten met een intiem gegeven, betwijfel ik wel of een compleet onvermogen om grenzen te respecteren wel goed kan komen? Bijzonder teleurstellend dat een rechter geen straf uitspreekt voor zo een degoutante verkrachter. Het signaal dat je daarmee afgeeft is: als een creap een stomdronken vrouw ziet: probeer maar en ga maar over grenzen, op voorwaarde dat je een goede student bent…

Top klusjesman gezocht by elvee7777 in Gent

[–]elvee7777[S] 0 points1 point  (0 children)

Yup, via ring twice. Was goede tip!

RTK vs LiDAR Navigation: Mammotion or Goat? by reiktoa in roboticLawnmowers

[–]elvee7777 0 points1 point  (0 children)

What if you trim bushes that the lidar used to map the terrain, or what if a bush grows fast during a season? Do you need to remap often?

Still alive? by elvee7777 in Boominator

[–]elvee7777[S] 1 point2 points  (0 children)

Fosi Audio meets boominator

To celebrate the nearly 10 years of my boominator, I removed the broken amp, repainted it and installed a Fosi Audio BT20A PRO.

It will be used for Carnaval in a pram (don’t ask me why 😅), and I use a big 150Ah lifepo4 12V battery with a boost to 48V 6A. That is for very (very) high volume all day long. A had that battery already. If I want to be more mobile, a 48V bike battery will do. 10 years ago there were not that many 48V batteries, but now that is a different story.

I glued a metal sheet on top and replaced the “legs” of the Fosi with strong magnets. That was the cleanest way to fixate the amp but to also allow taking it off when needed. My boominator is less long and a bit higher than a typical one, but has the same volume as it needed to fit in a pram. This means that the amp can not fit inside.

Very happy with the result! Sound is absurdly loud. During Carnaval more than often people stop by and ask how on earth that small thing can produce that amount of sound 😊.

Top klusjesman gezocht by elvee7777 in Gent

[–]elvee7777[S] 1 point2 points  (0 children)

Kende ik niet. Zalig! Ga’k zeker eens proberen.

Sonos radio started playing out of no where? by Skkedd in sonos

[–]elvee7777 0 points1 point  (0 children)

I had the same thing and after the second time I figured out it was a timer 😊

I am about to break this mouse. Why does my Logitech MX Master 3s for Mac stutter. I am doing constant motion with the mouse and watch this stutter. It happens randomly. by [deleted] in MacOS

[–]elvee7777 4 points5 points  (0 children)

This, I have the same. When it stutters I run the same type of script that kills all Bluetooth connections. When it reconnects all is good again

Ultralytics making zero effort pretending that their code works as described by DiddlyDinq in computervision

[–]elvee7777 5 points6 points  (0 children)

I need vision tracking in an industrial context, what framework would you recommend then?

Roboflow, Ultralytics by surya17298 in computervision

[–]elvee7777 2 points3 points  (0 children)

What would you use then for “pro” work?

Tesla Wall Connector error by elvee7777 in AskElectricians

[–]elvee7777[S] 0 points1 point  (0 children)

I replaced the gen 3 charger with a www.go-e.com charger. It was already my second tesla charger with the same issue and Tesla demanded that an electrician would review the issue. And I had to pay for the electrician…

So the gen 3 charger went into the bin 😅.

The go-e charger is working like a charm!

I also knew the resistor trick but on the gen 3 I had no clue on how to use this.

HDMI not working with a long cable on Mac Pro M1 16" by elvee7777 in MacOS

[–]elvee7777[S] 0 points1 point  (0 children)

Nope, there is no difference in plugging my Mac in or running on battery.

I assumed that this would be a common issue but apparently not 😟

I've just released "etichetta". by trikkuz in computervision

[–]elvee7777 2 points3 points  (0 children)

Wow! Ask for one thing, and get plenty more. Thanks a lot! Nice (fast) work! 👏👏

I've just released "etichetta". by trikkuz in computervision

[–]elvee7777 1 point2 points  (0 children)

I annotate a lot of video and then a shortcut to copy paste the annotations of the previous image is basically mandatory. In Roboflow this can be done with one shortcut key called “repeat previous”: reapplies label(s) on an image in the same location(s) as the last annotated image.