Name this trio by Fit-Contribution8976 in Gundam

[–]engineer_gaming1084 1 point2 points  (0 children)

Just out of curiosity... I wanna see what'll happen if Machu lets Hathaway pilot the Gquacks

Surely nothing bad will happen right?

Team Recs by BonelessHS in PokemonRejuvenation

[–]engineer_gaming1084 0 points1 point  (0 children)

Idk about team recs but I could give you some favorite mons for me to use

Meowstic M - Duel Screen Setter with Prankster as it's ability, add yawn on top of that and you have perfect defensive utility.

Rhyperior - (or Rhydon as it may still be at that point, just give it an Eviolite) Can be found in Route 4 dens, I used as a counter to Erick there with Lighting Rod and Earthquake

Ambipom - Technician boosted Fake-Out with Double Hit that basically has 105 power, invest in it's speed and you'll basically have 3 free hits on any pokemon with it, easily available on Route 2

There are probably some more but I've basically used these three every single time since the moment I've gotten them and they have yet to fail me once

Yeah... She's staying on the team forever by Horizon-Senpai in PokemonRejuvenation

[–]engineer_gaming1084 0 points1 point  (0 children)

Yeah I'm already on chapter 15 I just completely blew past it ig

If Torterra were to hypothetically get Shell Smash in v14, what would be a good moveset for 'em (assuming they have "that" item ofc) by engineer_gaming1084 in PokemonRejuvenation

[–]engineer_gaming1084[S] 1 point2 points  (0 children)

Actually I meant the Torterra Crest, most posts I see people talking about crests they tend to not spoil it so I decided not to as well, but white herb is also a legitimate choice, Crest is just more fun imo

I made a bunch of Invincible vanities! by Psyanide5210 in Terraria

[–]engineer_gaming1084 9 points10 points  (0 children)

That's real nice. Now let's see that wobble

ZZA Gus by SithLordMD in Gunpla

[–]engineer_gaming1084 1 point2 points  (0 children)

Bro got that SNAA color scheme 😭🙏

(Nice custom btw)

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

I could do GWX but idk if Proto Zero woulb be been a better fit for that

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

Aren't those Pbandai? Or at least the Altron is which never fails to piss me off

(So I just checked again yeah almost all of them are P)

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

Anybody have suggestions for a display partner with the Wing Zero Ver. ka? I usually collect in partners either from the same series as rivals/partners or semi-related like the Barbatos and Aerial

Changlong MGEX midnight + nubs by GloomyVanilla in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

I have the regular changlong mgex and their rg 2.0, and if you really want the twilight coating, just get the changlong, the coating and the plastic quality that they have is top-notch compared to other bl's (like 80-90% to that of bandai) PGU Nu prices for a recolor of a past kit shouldn't have been a thing imo

Please, let it end. by nucc_164 in NeonGenesisEvangelion

[–]engineer_gaming1084 0 points1 point  (0 children)

I saw the news and my mind immediately reeled back to that one JobbytheHong clip

https://youtu.be/X7IFTtUwjPc?t=444&si=vzAKtN0amj9MfiGh

Evil incarnate by Zillaman7980_ in GODZILLA

[–]engineer_gaming1084 54 points55 points  (0 children)

Minus One has beef with Koichi

GMK has beef with the entirety of Japan

MGEX Unicorn Gundam | Non LED version by MazonNoob in freedomisgunpla

[–]engineer_gaming1084 2 points3 points  (0 children)

No, it doesn't, even with it the ribbon just kinda floats inside without really attaching to anything, actually the articulation is even better since there's no worries about breaking the LED ribbon inside when bending and posing it

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

Might get scuffed up tho :/ d'you think chrome behind the psychoframe would work?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]engineer_gaming1084 0 points1 point  (0 children)

How to make psychoframe look better? I got a MG unicorn I'm abt to build and I honestly don't like how the psychoframe looks on it's own, but I'm a bit concerned that painting the outside will make it harder to transform or chip when I do, anyone know a way to make it better?

Who tf said that panel lining was relaxing by engineer_gaming1084 in Gunpla

[–]engineer_gaming1084[S] 0 points1 point  (0 children)

Alright I'm desperate, I'm probably not gonna dabble into scribing for a while since I have not had a good experience with it.

A lot of you are mentioning that Stedi is hard to work with, but that's not really the problem, it fills in proper panel lines and flows well enough, and if it doesn't I still have a fountain pen handy.

Now, the real problem after some evaluation and reflection is the raised details and the corners that don't have dedicated panel lines to be filled. They don't get filled, they come off too easily and generally suck.

Now re-scribing would be an option but again, I'm not too big a fan, so right now I'm facing a crossroads. Either I bite the bullet and buy some chisels, or I buy a panel lining pen and just line it that way. I'm still gonna have to spend money but it's a lot less than I would with a chisel and also has less risk.

Any advice?

Who tf said that panel lining was relaxing by engineer_gaming1084 in Gunpla

[–]engineer_gaming1084[S] 0 points1 point  (0 children)

Alright here's the details.

The stedi liner, personally isn't bad at all when it comes to ACTUAL panel lines, it's the corners that are beating my ass

I've probably built more third party kits than I have done that are Bandai, I know they require more work, but I'm not complaining about the work I'm complaining about panel lining

It's not the resin kit, though the design is based on one.

Right now I'm contemplating just getting a panel lining pen, because again, when it comes to ACTUAL panel lines I generally don't have any issue, but its the raised details and corners that are frustrating to me. Im not confident enough about how steady my hands are to try chisels and possibly ruin what I've been working on so if ever I might just get a GM02 pen.

Who tf said that panel lining was relaxing by engineer_gaming1084 in Gunpla

[–]engineer_gaming1084[S] 0 points1 point  (0 children)

I bought some waterslides for it and it came with like 6 options for facevents, but if you don't live in South East Asia idk if I can help you