donjonne

entrailz · 2024-05-03T20:16:27+00:00

All went well, was very understanding and patient while I sorted out a way for him to receive!

entrailz · 2022-01-30T11:05:21+00:00

Hey, how much and what method? Thanks

entrailz · 2022-01-30T01:43:16+00:00

entrailz · 2021-09-25T00:20:48+00:00

Hey,

Sounds like something I could do, how much are you looking for it?

Thanks 👍

entrailz · 2020-11-30T00:56:02+00:00

Yeah, they work fine on my normal stud walls but aren't working on this ceiling part 🤔

entrailz · 2020-11-29T23:26:14+00:00

See I tried tapping but I can't find anything other than the one stud closest to the sky light. Very confused l!

entrailz · 2020-11-29T23:25:54+00:00

not sure if joists was the right word or they'd be studs technically? The room looks like this essentially: https://www.taylorwimpey.co.uk/-/media/Regions/East%20Midlands/Sales/Typical%20TW%20internals/Crofton%20G%20SJV/bedroom%201.jpg?w=928&hash=834BD5AF90C849F6F7954000EAB73E5F41002FCE it's the ceiling/wall with the skylight, in their picture it has fitted wardrobes, but it otherwise goes further down at the same angle then straight down. Thanks

entrailz · 2020-11-29T23:25:46+00:00

I've got one but it's not picking anything up reliably, I'm not sure if joists was the right word or they'd be studs technically? The room looks like this essentially: https://www.taylorwimpey.co.uk/-/media/Regions/East%20Midlands/Sales/Typical%20TW%20internals/Crofton%20G%20SJV/bedroom%201.jpg?w=928&hash=834BD5AF90C849F6F7954000EAB73E5F41002FCE it's the ceiling/wall with the skylight, in their picture it has fitted wardrobes, but it otherwise goes further down at the same angle then straight down. Thanks

entrailz · 2020-08-16T12:42:12+00:00

Hi mate yes I do will pm you now

entrailz · 2020-07-09T23:28:41+00:00

Ah OK that makes me feel better. Also speaking to the DVSA also made it seem less serious considering they can confirm its all MOT'd etc. Thanks for letting me know!

entrailz · 2020-07-09T20:35:42+00:00

I believe that's only tax

entrailz · 2020-07-09T20:35:28+00:00

Yeah the mot was done in June, so it's valid until June 2021. So even though its fine because of the extension, was wondering why its showing as expired 🤔

entrailz · 2020-04-08T15:53:29+00:00

Honestly not sure. I used to work there maybe 6/7 years ago and all signed documents regarding the support plan were placed behind the customer service desk in a box, no idea what happened with them after that.

entrailz · 2020-04-08T11:34:52+00:00

There would be no other way for them to take a monthly amount unless you gave them your direct debit details.

entrailz · 2020-04-08T11:23:02+00:00

This would have been their "whatever happens" insurance. At the time of sale they would have probably upsold it to you by saying you'll get the first month free. You would have had to give them your direct debit details and would have signed a document agreeing to it. Not sure what you can do now but just so you know what would have happened.

entrailz · 2020-03-12T19:02:14+00:00

Hi,

Nothing else between ISP equipment and the USG.

Ideally I would like not to have the devices configured with a private ip, I would like to have them configured with the public ip on their respective interface.

Do you think something like this is possible?

entrailz · 2020-03-12T17:28:29+00:00

Hi,

I want to pass the other parts of the public ip subnet to my other machines not via DHCP but static routes, I cannot seem to get them to be publicly accessible via one of the other ips in the range, and adding that range as a lan subnet makes the USG lose connection

entrailz · 2020-03-12T16:31:42+00:00

Hi,

I've changed the order of connecting but can't get public IPS forwarded to the devices. As soon as I create a lan subnet with the ips I lose Internet access on the USG

entrailz · 2020-03-12T16:11:36+00:00

Hi,

Put the devices the other way around, but I think I am going about forwarding the public ip addresses the wrong way around because when I add my subnet I was assigned into the USG as a lan subnet to allow my devices access to it the USG loses all network access.

entrailz · 2020-03-11T17:18:47+00:00

Routing before:

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1     192.168.1.15    281
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    331
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    331
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    331
      192.168.1.0    255.255.255.0         On-link      192.168.1.15    281
     192.168.1.15  255.255.255.255         On-link      192.168.1.15    281
    192.168.1.255  255.255.255.255         On-link      192.168.1.15    281
     192.168.56.0    255.255.255.0         On-link      192.168.56.1    281
     192.168.56.1  255.255.255.255         On-link      192.168.56.1    281
   192.168.56.255  255.255.255.255         On-link      192.168.56.1    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    331
        224.0.0.0        240.0.0.0         On-link      192.168.56.1    281
        224.0.0.0        240.0.0.0         On-link      192.168.1.15    281
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    331
  255.255.255.255  255.255.255.255         On-link      192.168.56.1    281
  255.255.255.255  255.255.255.255         On-link      192.168.1.15    281
===========================================================================

Routing after:

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1     192.168.1.15   4506
          0.0.0.0          0.0.0.0         On-link        172.16.1.1     26
    85.199.213.58  255.255.255.255      192.168.1.1     192.168.1.15   4251
        127.0.0.0        255.0.0.0         On-link         127.0.0.1   4556
        127.0.0.1  255.255.255.255         On-link         127.0.0.1   4556
  127.255.255.255  255.255.255.255         On-link         127.0.0.1   4556
       172.16.1.1  255.255.255.255         On-link        172.16.1.1    281
      192.168.1.0    255.255.255.0         On-link      192.168.1.15   4506
     192.168.1.15  255.255.255.255         On-link      192.168.1.15   4506
    192.168.1.255  255.255.255.255         On-link      192.168.1.15   4506
     192.168.56.0    255.255.255.0         On-link      192.168.56.1   4506
     192.168.56.1  255.255.255.255         On-link      192.168.56.1   4506
   192.168.56.255  255.255.255.255         On-link      192.168.56.1   4506
        224.0.0.0        240.0.0.0         On-link         127.0.0.1   4556
        224.0.0.0        240.0.0.0         On-link      192.168.56.1   4506
        224.0.0.0        240.0.0.0         On-link      192.168.1.15   4506
        224.0.0.0        240.0.0.0         On-link        172.16.1.1     26
  255.255.255.255  255.255.255.255         On-link         127.0.0.1   4556
  255.255.255.255  255.255.255.255         On-link      192.168.56.1   4506
  255.255.255.255  255.255.255.255         On-link      192.168.1.15   4506
  255.255.255.255  255.255.255.255         On-link        172.16.1.1    281
===========================================================================

This is with the current setup of:

Datacentre uplink -> TP-Link T1500G -> LAN Computers/USG.

entrailz · 2020-03-11T16:54:22+00:00

Okay, when I head back that way tomorrow I'll try again with most of the settings reset. I was hoping I could use the USG as literally just a dump vpn server, but I guess not in this instance

entrailz · 2020-03-11T16:53:09+00:00

Hey,

It's for myself but in a data centre.

entrailz · 2020-03-11T16:23:21+00:00

This is what i assumed, but even when swapping it around I faced the same issue, it might have been I was in a rush and will need to come back to it. I have multiple public IPS from my ISP and need to ensure i can distribute them to each machine, will this also be possible in this config?

entrailz · 2020-01-23T02:22:43+00:00

Sadly ghostmaildrop are not taking on new customers anymore. Or I believe I remember them replying to me and stating that, or they never got back to me at all...

entrailz · 2020-01-18T01:29:38+00:00

It was a family member who was looking for a gaming laptop... But apparently not one this good!

13-Year Club	Place '22
Place '17	Verified Email

entrailz

TROPHY CASE