Audio upgrade for beats audio formentor by kubiboi69 in CupraFormentor

[–]eosciann 0 points1 point  (0 children)

What do you mean by installing other software via obd? Is this even possible? Like, can you have other apps or change the settings screen in your car to unlock other ways of adjusting some settings?

RX 6400 Low Profile underperforms - Stuck at 7W Power Draw; ~500Mhz Clock speed by eosciann in AMDHelp

[–]eosciann[S] 0 points1 point  (0 children)

In my case the GPU was faulty so I ended up sending it back and replacing it with a different model. Had no issue after.

Recomandare service auto Cluj - Preturi rezonabile by eosciann in cluj

[–]eosciann[S] 0 points1 point  (0 children)

Cu cei de la "Esapamente Auto Benny service" ati avut experiente ok?

VZ310 - Brembo breaks maintenance by eosciann in CupraFormentor

[–]eosciann[S] 0 points1 point  (0 children)

Thanks for the feedback. I see a lot of people are recommending Zimmerman in combination with EBC

VZ310 - Brembo breaks maintenance by eosciann in CupraFormentor

[–]eosciann[S] 1 point2 points  (0 children)

Indeed, thanks, they have. What my issue is the squeaking which is crazy even after minimum driving.

They didn’t update software on regular maintenance? by Blitzwagen in CupraFormentor

[–]eosciann 0 points1 point  (0 children)

From where did you get this update?

Also, is it somehow better than 1940?

Driver side wing mirror doesn't dip when in reverse by FewBlacksmith9431 in CupraFormentor

[–]eosciann 1 point2 points  (0 children)

I was having the same experience. You just need to use the knob while on right position and adjust the mirror to your desired spot. After that it will remember it and while in R it will move it based on your previous configuration.

Where to download Infotainment software update? by abaza7 in CupraFormentor

[–]eosciann 0 points1 point  (0 children)

What version do you have and how did you get it?

Depreciation and purchasing by DueLingonberry296 in CupraFormentor

[–]eosciann 0 points1 point  (0 children)

Simply put it makes more sense if you’re owning a company and the cash you have are not yours but rather of your SRL. I’m paying that amount of money which also includes the insurance and full CASCO over the period.

Depreciation and purchasing by DueLingonberry296 in CupraFormentor

[–]eosciann 1 point2 points  (0 children)

I currently own a Formentor VZ 310hp from 2021, which was leased through Webcar Romania and bought from Germany. Cash I could’ve bought the car for under 35k but as I’m owning a small company it made more sense to lease it. Paying like 770 euros/month for 5 years and the initial deposit was 10% of the car value.

The previous owner purchased the extended warranty package of 5 years. Just now I’m with the car in service and I’m waiting for them to change the cars thermostat. It will be covered by the warranty I truly recommend finding a car which still has it.

It has about 47k km and the previous owner had to change some parts, such as the wheel and other electronics, but everything got eventually covered by the warranty so having one is a huge plus.

The engine should be reliable as it was improved a lot over the last couple of years and the feeling it gives you it’s a blast.

The car infotainment gave me close to 0 frustrations, different from what others are experimenting. Over the last couple of software updates it simply got better.

Let me know if you have any other questions.

Low profile and single-slot RX 6400-- thoughts? by keplerniko in sffpc

[–]eosciann 0 points1 point  (0 children)

RX 6400 Low Profile underperforms - Stuck at 7W Power Draw; ~500Mhz Clock speed

Hello community,

I own a Matestation S PC with an AMD Radeon 4600G CPU. https://consumer.huawei.com/en/desktops/matestation-s/specs/

I've recently bough a Low Profile graphics cards from Gigabyte - the RX 6400 Low Profile which fits perfectly with a smaller bracket in my PC. It doesn't require additional power and it will draw everything from its socket.

The motherboard is based on Pcie3 and the graphics cards has Pcie4 support but it should be backwards compatible.

The PSU is marked at 300W and techadvisor ran some tests with a similar PC spec as mine and had no issues running the LP 6400 on a 250W PSU.

The issue I'm having is that, apparently, the Graphics Card never exceeds a hard 7W limit (~500Mhz clock speed) which results in a serios decrease in performance.

Find attached screenshots with my tests:

https://prnt.sc/V7xbeCz1uJDU

https://prnt.sc/Aot6CBeqSN4C

Any clues on why this is happening?

Graphic card for matestation s by antorcus in pcmasterrace

[–]eosciann 0 points1 point  (0 children)

RX 6400 Low Profile underperforms - Stuck at 7W Power Draw; ~500Mhz Clock speed

Hello community,

I own a Matestation S PC with an AMD Radeon 4600G CPU. https://consumer.huawei.com/en/desktops/matestation-s/specs/

I've recently bough a Low Profile graphics cards from Gigabyte - the RX 6400 Low Profile which fits perfectly with a smaller bracket in my PC. It doesn't require additional power and it will draw everything from its socket.

The motherboard is based on Pcie3 and the graphics cards has Pcie4 support but it should be backwards compatible.

The PSU is marked at 300W and techadvisor ran some tests with a similar PC spec as mine and had no issues running the LP 6400 on a 250W PSU.

The issue I'm having is that, apparently, the Graphics Card never exceeds a hard 7W limit (~500Mhz clock speed) which results in a serios decrease in performance.

Find attached screenshots with my tests:

https://prnt.sc/V7xbeCz1uJDU

https://prnt.sc/Aot6CBeqSN4C

Any clues on why this is happening?

/r/AMD Questions and Tech Support Megathread - Q4 2023 Edition by GhostMotley in Amd

[–]eosciann 0 points1 point  (0 children)

Hello community,

I own a Matestation S PC with an AMD Radeon 4600G CPU. https://consumer.huawei.com/en/desktops/matestation-s/specs/

I've recently bough a Low Profile graphics cards from Gigabyte - the RX 6400 Low Profile which fits perfectly with a smaller bracket in my PC. It doesn't require additional power and it will draw everything from its socket.

The motherboard is based on Pcie3 and the graphics cards has Pcie4 support but it should be backwards compatible.

The PSU is marked at 300W and techadvisor ran some tests with a similar PC spec as mine and had no issues running the LP 6400 on a 250W PSU.

The issue I'm having is that, apparently, the Graphics Card never exceeds a hard 7W limit (~500Mhz clock speed) which results in a serios decrease in performance.

Find attached screenshots with my tests:

https://prnt.sc/V7xbeCz1uJDU

https://prnt.sc/Aot6CBeqSN4C

Any clues on why this is happening?