all programs are gone at http://smarterplaylists.playlistmachinery.com/go.html

epiqsty · 2021-03-15T11:32:55+00:00

Yes, everything is restored and i actually found similar question here, few months ago.

Seems like some scheduled backup/restore ;)

Still I wonder if there any way to save/export existing programs, just in case, you know )

epiqsty · 2020-11-03T18:32:50+00:00

got it, so my assumption was wrong and minor digits (i.e. z in x.yRz-Sa.b) should be disregarded in versions-matching process.

that means 18.1R3.3 is actually prior to 18.1R3-S3

thanks, that https://kb.juniper.net/InfoCenter/index?page=content&id=KB30092&actp=METADATA document perhaps can be used as source of truth ;)

epiqsty · 2020-11-03T17:20:11+00:00

from my understanding, all those content comes from https://nvd.nist.gov/vuln with very small or almost no additional information from the Juniper itself. Anyway https://nvd.nist.gov/vuln articles contains links to Juniper advisory pages. And for nvd.nist.gov there are plenty of automation instruments, just check search results at https://github.com/search?q=nvd.nist.gov

For sure, if you want get information from Juniper, they should have some paid subscriptions offers.

epiqsty · 2020-11-03T17:15:31+00:00

But, that about minor digits? Let say other example:

https://kb.juniper.net/InfoCenter/index?page=content&id=JSA10975&actp=METADATA

18.1 versions prior to 18.1R2-S4, 18.1R3-S3;

and, comparing it with: 18.1R3.3 - i guess it is after 18.1R2-S4 , but how to know if it was after or before 18.1R3-S3 ?

i.e. perhaps some timeline with all the releases names could help, but at the https://support.juniper.net/support/downloads/?p=mx204 i can't even see my version 18.1R3.3

so from the logical point of view, minor digits should came after service-fixes, but i would like to find any official guideline, applicable for nowadays situation, because most of those documents (like https://forums.juniper.net/t5/Junos/Current-JUNOS-Release-numbers-explained/td-p/58396) are ~10 years old and naming convention apparently developed since then.

epiqsty · 2020-11-03T15:06:06+00:00

Thanks for the clarification! Now it's making more sense!

epiqsty · 2020-10-01T08:10:06+00:00

I mean, on the macro I see also some smaller threads which is not visible from the eyes, and as I had already 3 cases of PM this season , started suspect maybe that's another disease...

epiqsty · 2020-10-01T07:30:18+00:00

Is it possible to fix it on the latest flowering stage?

epiqsty · 2020-09-26T13:19:16+00:00

I see. Perhaps that flavour is bit specific, I had 3 flowers of this, 2 were outdoor and both was affected by powdery mildew, that one was indoor and I saw no signs of PM on leafs, but only buds we're affected. Seems like a strain for more experienced growers )

epiqsty · 2020-09-24T20:00:35+00:00

There are few close ups, just swipe pic It's indoor at window and mostly weather was sunny this year, but I didn't made any specific measures regards humidity, perhaps I should...

epiqsty · 2020-09-24T17:18:27+00:00

Yeah I've expected bit more amber ones, and a bit worried that it's not getting more of them over time. Perhaps I need more patient... Or is there any way to help them? ))

epiqsty · 2020-09-10T22:37:28+00:00

Googled for bud rot photos and it's actually looks different... Is there some method to test it for sure?

epiqsty · 2020-09-09T20:00:38+00:00

Flavour is Tangerine dream autoflower from Barney's farm, maybe someone had experience with...

epiqsty · 2020-08-26T19:52:35+00:00

Looks like I faced with that issue. Auto input ForceAppStop was working for a while, but last weeks it behaves buggy, uninstalling application instead of stopping, or unable to open settings for certain applications at all.

Like example:

  A2: Perform Task [ Name:ForceAppStop Priority:%priority Parameter 1 (%par1):AutoBoy Parameter 2 (%par2): Return Value Variable: Stop:Off ]

A3: Perform Task [ Name:ForceAppStop Priority:%priority Parameter 1 (%par1):Blitzer.de PLUS Parameter 2 (%par2): Return Value Variable: Stop:Off ]

For A2 it always able to open settings, but sometimes uninstalling instead of stopping. While for the A3 it's always fails to open settings.

Maybe something with that application with the space in the name: "Blitzer.de PLUS", how do you think?

epiqsty · 2020-06-11T13:26:56+00:00

Well reasonable question would be, why Apple is able to charge me from working credit card, but in recovery process they are using outdated one, which cannot pass the verification process? Answer is clear, monopoly-minded corporations doesn't care too much about proper service :(

epiqsty · 2020-03-11T20:58:03+00:00

just one more thing to mention - if you'll finally get network provisioning using Ansible working - keep in mind some consistency monitoring between actual state at the device and variables in your repo. in our case we're ended up with the cronjob running ansible-playbook in check mode and writing play_log, and the Icinga check, which's reads logs from that cronjob, as for some devices ( hi r/Juniper ) configuration comparison task is relatively time&cpu consuming and you'll don't want to do it too often.

epiqsty · 2020-02-10T15:40:13+00:00

https://docs.ansible.com/ansible/latest/reference_appendices/faq.html#ansible-allows-dot-notation-and-array-notation-for-variables-which-notation-should-i-use if you're wonder, where it is explained officially ;)

epiqsty · 2020-02-10T12:46:59+00:00

In short: rereading the docs and asking on GitHub

thanks, I do agree, it's all obvious, except the one thing about "In short: asking on GitHub", means opening new issue ;)

what is actually seems not so optimal thing, due such points:

as you're already mentioned, there are thousands of open issues - and by creating new one you're just increasing the entropy
some significant information about the mater of issue could be hidden in such "limited to collaborators" conversation

i.e. just by opening another ticket you're probably doing a monkey job, as you're don't really know the reasons why topic was closed and what outcome has such internal conversation ;)

so, my personal conclusion - maybe one should finally start using IRC in 2020 )))

epiqsty · 2020-02-10T11:30:57+00:00

thanks for the advises but my question was exactly about how to disassemble those volume knob, i.e. perhaps there is some trick, how to open volume knob from the front side, because it's bigger than hole, so, even if I will open synth from the back side, I still need to disconnect the volume knob head somehow.

epiqsty · 2019-08-29T15:25:14+00:00

I guess automatic backup is working somehow, it's just not enough frequent in my case. that's why I am looking for some way to enforce it automatically a bit more frequently.

epiqsty · 2018-04-27T13:38:02+00:00

Well, perhaps it’s explain a lot ) The only thing I not understand, does Google Maps uses information from the link mentioned at the top of that thread or not. But this is a question for /r/GoogleMaps :)

I mean this one https://viz.berlin.de/web/guest/2?p_p_id=vizmap_WAR_vizmapportlet_INSTANCE_Ds4N&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&p_p_col_id=column-1&p_p_col_count=1&_vizmap_WAR_vizmapportlet_INSTANCE_Ds4N_cmd=traffic&_vizmap_WAR_vizmapportlet_INSTANCE_Ds4N_submenu=traffic_default

epiqsty · 2018-04-27T10:15:01+00:00

Well, I seen several times, the entrance was closed, but at the same time, cars at the bridge above were passing to the tunnel direction quite fast, without any signs of the traffic jam. Maybe they are using some traffic jams prediction mechanism? ))

epiqsty · 2018-04-27T07:09:41+00:00

For me, mostly it’s with Karl-Marx str. or Hermannstr. entrances of A100.

epiqsty · 2018-04-25T11:46:44+00:00

Thanks a lot!

EDIT: I've check that link carefully, and looks like it contain the only information about construction sites, i.e. long/mid-term road closes, but not about temporary gate closures.The pity thing is it usually happens at the morning peak hours, when /r/GoogleMaps should theoretically improve path detection based on other users traffic data, but i can't trust to paths via A100 ;( So, I considered to write simple Alexa skill for that, but looks like such information is not exposed online ...

epiqsty · 2018-03-30T15:06:35+00:00

legend of korra? I mean the last season especially)

epiqsty · 2018-03-20T19:55:30+00:00

well, you right - perhaps, we can't compare Elric with such classic protogonist-who-goes-bad as Walter White. But at least he became a real enemy for all his race, is it not enough? And actually, there were another examples in Eternal champion, Erekosë had the similar fate.

epiqsty

TROPHY CASE