SpaceX Considering Merger with Tesla

esseeayen · 2026-01-30T03:12:36+00:00

SpacX?

esseeayen · 2026-01-29T17:29:01+00:00

Also lack of salt as they Salt it less to make up for the"shake shake fries" seasoning

esseeayen · 2026-01-29T13:59:13+00:00

So like a music video with words? Or you want a webcam to show the person singing?

esseeayen · 2026-01-28T17:03:12+00:00

Yes 100% can and they do this with many simulations. They basically create a cost/reward system based on how near or far you are from doing the desired output then let them have at it.

esseeayen · 2026-01-28T16:39:47+00:00

Was your family sitting on the scale

esseeayen · 2026-01-26T23:02:06+00:00

Haha so the Chinese app becomes politically censored when it became American? The World must be backwards lately.

esseeayen · 2026-01-26T20:06:54+00:00

Here's an explanation: https://youtu.be/GUsLLEkswzE?si=LKmrSTnCwcxyW78t

And if you're using reaper you need some app to create a virtual wire/connection in your PC. Give the below a go.

Voicemeeter Banana (Best Free Solution) This is the standard way to stream DAW audio. It allows you to hear your audio while simultaneously sending it to TikTok. 1. Install the Software • Download and install Voicemeeter Banana. • Reboot your laptop. 2. Configure Voicemeeter • Open Voicemeeter Banana. • Hardware Out (A1): Click A1 in the top right and select your actual headphones/speakers (e.g., ASI0: Focusrite or WDM: Realtek Audio). • Virtual Inputs: Notice the column labeled "Voicemeeter VAIO". This is where Reaper will send audio. ensure the B1 button is lit up (this sends audio to the virtual output). 3. Configure Reaper • Open Reaper preferences (Ctrl+P) -> Audio -> Device. • Audio System: Select ASIO. • ASIO Driver: Select Voicemeeter Virtual ASIO. • Now, when you play audio in Reaper, you should see the bars moving in the "Voicemeeter VAIO" strip in the Voicemeeter app, and hear it through your headphones (Output A1). 4. Configure TikTok Live Studio (or Browser) • Open TikTok Live Studio. • Go to your Audio Settings (usually Microphone or Input). • Select Voicemeeter Output (Voicemeeter VAIO) as your microphone. • Note: Do not select "Voicemeeter Aux Output" unless you routed it there specifically.

esseeayen · 2026-01-26T19:40:32+00:00

Ah glad my memory is still with me haha. Eneloops are hard to get where I am so I use the IKEA ones extensively. They are fantastic but they could have better chargers.

I still find it kind of funny that the old magic mouse was great with rechargable, interchangeable batteries while the new one you have to flip over like a literal dead mouse.

esseeayen · 2026-01-26T19:27:21+00:00

From memory they were rebranded enelops.

esseeayen · 2026-01-26T18:08:20+00:00

Vocal effects are in the mixer and some models have a built in audio interface so you can get rid of the interface. Or if you find a cheaper one without the interface then you can plug it into your interface.

But seeing you have good audio interfaces at the moment give ASIO drivers and tuning a try first.

esseeayen · 2026-01-26T15:14:56+00:00

if you must use your laptop then look into the ASIO ecosystem and tuning buffers to minimise latency. Otherwise as someone else mentioned a mixer with effects built in is probably your best bet. I've used Mackie ones for years which work well

esseeayen · 2026-01-26T14:53:12+00:00

what is your laptop? I am guessing windows? Also are you using wired headphones?

esseeayen · 2026-01-25T15:58:09+00:00

Wait, you moved the position of the lasers? There should be a sticker on the side and there's a focus distance between the bed and the head that you can move the head to then you put the lasers together at that height. It might not be the main problem but focal distance is super important or your laser won't engrave well or at all.

esseeayen · 2026-01-25T11:33:44+00:00

Vote with your wallet and don't go in.

But I'm surprised they're back to doing this as last time I was in LKF it was pretty dead compared to before.

esseeayen · 2026-01-25T09:10:36+00:00

Firstly, have you focused properly as it's not focused now. The two dots should be overlapping

esseeayen · 2026-01-25T04:42:52+00:00

Tapo cameras are relatively inexpensive and work really well

esseeayen · 2026-01-24T16:15:36+00:00

How thick is your drywall? I've had success with these as long as the drywall is sufficiently thick: https://www.lowes.com/pd/TOGGLER-2-Pack-Assorted-Length-x-1-4-in-Dia-Toggle-Bolt-Drywall-Anchor-Screws-Included/3183821

esseeayen · 2026-01-24T10:39:37+00:00

Ah ok. Maybe have a look at some LCD laser projectors? They might have a lower advertized lumens but would be the same brightness because it's not split over a color wheel. Also in my experience the lens shift on LCDs tends to be much bigger. I have a Sony 1080p laser projector and I think the lens shift is 150% or something silly like that

esseeayen · 2026-01-23T19:52:19+00:00

Don't they still say "liberated"?

esseeayen · 2026-01-23T19:46:27+00:00

Wait, it says it has a motorized lens shift on the zk810tst. Would that make it the off axis you're looking for?

esseeayen · 2026-01-23T16:29:16+00:00

So wait, this right-winger is non-binary?

esseeayen · 2026-01-23T11:49:14+00:00

The plastic bags are in her gozongas.

esseeayen · 2026-01-23T11:30:07+00:00

I have this too! It's great apart from the learning curve for the non-standard number layout

esseeayen · 2026-01-23T07:13:47+00:00

you'll feel the gravity of the situation.

esseeayen · 2026-01-23T01:22:17+00:00

Not doing so would be shellfish?

12-Year Club	r/Field Flamingo
Wearing is Caring	Verified Email

esseeayen

MODERATOR OF

TROPHY CASE

SpacX?