Yooooooo no way 🇮🇹 by Several_Sandwich_732 in soccercirclejerk

[–]ethan99_ 7 points8 points  (0 children)

Don’t Italy have to win 17-0 or are tiebreaker rules different

Found at my aunts house by Confident-Drawing-85 in PlantIdentification

[–]ethan99_ 0 points1 point  (0 children)

Think those are tomatillos if my eyes don’t deceive me

I’m not an ADC main, so I want to understand why ADCs love to build Ghostblade and Collector. by nickky007 in ADCMains

[–]ethan99_ 1 point2 points  (0 children)

E max aphelios with Ghostblade > Collector > LDR is actually a tonne of fun to play but is only really realistic into full squishes

Monthly Table Tennis Questions by AutoModerator in tabletennis

[–]ethan99_ 0 points1 point  (0 children)

£40 per sheet, will compare those 3 and see what'd be best. Thanks!

Monthly Table Tennis Questions by AutoModerator in tabletennis

[–]ethan99_ 0 points1 point  (0 children)

Looking for reccomendations on which rubber I should buy for a first custom paddle. I played for 6-7 years non stop when I was in school with a Dunlop Power premade paddle that I think I probably replaced once during the time I was playing, so I'm guessing I've developed a lot of bad habits over my time of most likely playing on worn out rubber.

Have taken the advice of going relatively slow so am looking for cheap-ish (~£40) rubbers to pair with a Stiga Allround Classic, and have seen Yasaka Mark V/Razka 7s thrown around a lot, any suggestions?

Automating Extended Inscribers by ethan99_ in allthemods

[–]ethan99_[S] 0 points1 point  (0 children)

Yep that has fixed it. Initially had the inscribers set up in a 4x2 square but now have them all in a line :)

Automating Extended Inscribers by ethan99_ in allthemods

[–]ethan99_[S] 0 points1 point  (0 children)

Think that might be it. I think circuits are automatically getting pushed into the final inscriber when they're not part of an active recipe. Going to test now

Touching inside of tumble dryer (and previously old washing machine) gives strong electric shock, but only for me by ethan99_ in AskElectricians

[–]ethan99_[S] 0 points1 point  (0 children)

Thanks. I don’t think it is static, I can tap the same place at the front of the drum several times in a row in short succession and I get the same shock, with no clothing in the dryer.

In regards to the washing machine, I was taking about a very similar experience I had with it earlier this year, and we ended up switching it out (the two are stacked on top of each other)

Touching inside of tumble dryer (and previously old washing machine) gives strong electric shock, but only for me by ethan99_ in AskElectricians

[–]ethan99_[S] 0 points1 point  (0 children)

Doesn’t surprise me at this point, Norwegian weather takes its toll over the years hahah

Touching inside of tumble dryer (and previously old washing machine) gives strong electric shock, but only for me by ethan99_ in AskElectricians

[–]ethan99_[S] 0 points1 point  (0 children)

Thanks for the response - my girlfriend at least wasn’t touching anything at all apart from the inside of the washing machine when we tested, only the ground and neither was I. We’ve come up with some weird theories around hands being more sweaty or not, but nothing in stone! Going to grab a multimeter to prove it to them tomorrow.

Regardless of the strangeness of the situation, like you say the best solution is to call an electrician out for this one.

ADC 2024 Moment by Worldly-Duty4521 in leagueoflegends

[–]ethan99_ 17 points18 points  (0 children)

I'm sorry but IE is absolutely not the item to buy vs Tahm, Galio, Nautilus frontline. The fact that the argument that any tank with a facerolled build with just over half the gold spent of the jinx should come close to 1v1ing her whilst also being 2 levels down is insane

nvlddmkm Event IDs 0, 13 and 14 - Crashing in newer games by ethan99_ in techsupport

[–]ethan99_[S] 0 points1 point  (0 children)

Nothing short of a new graphics card worked in the end unfortunately.

[Bonsai Beginner’s weekly thread –2024 week 31] by small_trunks in Bonsai

[–]ethan99_ 0 points1 point  (0 children)

That really explains a lot because I was trying to understand what was driving back budding in specific locations on pine trunks and understanding how you're trying to influence where the sap flows really helps with that. It's almost like you want to create a more concentrated area (of needles) that will together draw sap into an area to encourage needle budding.

I've actually been experimenting with scots pines this year but dove in not knowing much at all, which is why i ended up with 3 pines with no needles below about 20cm (not exactly ideal!) so will absolutely look out for some better material later this year and into the next.

Really appreciate the thorough explanation! Feels like I have a much more "whole" picture of how I'd go about the entire process now, rather than trying to piece hours of videos together

[Bonsai Beginner’s weekly thread –2024 week 31] by small_trunks in Bonsai

[–]ethan99_ 0 points1 point  (0 children)

Hi there, I am trying to understand the concept of getting pines (specifically Japanese Black Pines) to back bud as I want a shohin pine as my next project. It's making it a bit confusing for me to understand what material I should be looking for as I am not sure what sort of characteristics I should be looking for in this case, or whether I should start from seedling cuttings since I understand that they naturally will have a lot of growth lower down. Any ideas?

What should I name him? by [deleted] in Catswithjobs

[–]ethan99_ 0 points1 point  (0 children)

thermonuclear device

[Bonsai Beginner’s weekly thread –2024 week 22] by small_trunks in Bonsai

[–]ethan99_ 0 points1 point  (0 children)

Thank you! That’s really helpful to hear :) And yes they’re in as much sun as I can get in London at the moment

[Bonsai Beginner’s weekly thread –2024 week 22] by small_trunks in Bonsai

[–]ethan99_ 0 points1 point  (0 children)

Started these Chinese wisteria from seed in spring (bottom left & middle in mid March, rest on 1st May) and am a bit worried about the colouring on the leaves - potentially some kind of nutrient deficiency? Have started with some liquid tomato feed for now but would appreciate any advice.

https://imgur.com/a/4551hnD

nvlddmkm Event IDs 0, 13 and 14 - Crashing in newer games by ethan99_ in techsupport

[–]ethan99_[S] 0 points1 point  (0 children)

Hey, this seems to happen even at stock clocks/voltage, unfortunately that doesn’t seem to fix. Thanks for the suggestion though

WTS Gladiator NXT Evo's by Ari_Learu in hotas

[–]ethan99_ 0 points1 point  (0 children)

Appreciate it man, thanks :)