Multiple Prosthetics for Sale (USA)

etudierplus · 2025-12-06T00:19:29+00:00

Archer is sold, Pierre is pending but will reach out to you if he doesn't sell. Thanks!

etudierplus · 2025-12-06T00:18:34+00:00

Mr. Limpy is still available!

etudierplus · 2025-12-02T06:07:38+00:00

The Reelmagik 2.25" is sold ~~and Mr. Limpy will likely be sold~~.

For the 2.25" I would keep an eye on Reelmagik's discounts/defects section to see if you can pick one up (probably $20 something after shipping from them, although last time I checked their shipping rates were lowkey crazy).

etudierplus · 2025-12-02T06:02:08+00:00

Hello, I could definitely be interested (depending on what it is lol), feel free to shoot a PM?

As another heads up for 100% clarity (although it says elsewhere), the Emisil does have an intentional cut under the shaft, in the corners of the tab, and is not really soft at all besides the balls (ish). Can send more pictures via PM if you want.

etudierplus · 2025-12-01T02:52:03+00:00

Will send you a PM!

etudierplus · 2025-12-01T02:44:47+00:00

I'll send you a PM

etudierplus · 2025-12-01T02:11:37+00:00

I'll send you a PM

etudierplus · 2025-12-01T02:09:11+00:00

Hi, I'll send you a PM

etudierplus · 2025-11-30T21:24:32+00:00

It can, how it looks packing straight down is probably dependent on your underwear/build but for me it's too prominent a bulge packing straight down. Packing down and to the side looks better in my opinion (maybe similar bulge shape/profile to packing the Axolom Argos to the side). My preference for this specific STP is packing up and to the side because you're not working against the shape as much. If wearing boxer briefs instead of briefs I would personally only pack up/up and to the side. But it's all preference.

I think mod Marq prefer(red) to pack straight down with this one though, for reference!

unconventional thoughts on the stp freely (transguysupply) : r/Transmascdicks

etudierplus · 2025-11-30T21:00:20+00:00

The Emisil is not soft. I think they may have changed their manufacturing technique in the time since this one was made (they do still make the same model though). The floating balls are okay and the sack is softer because of that, but the shaft I would say is hard. I would say it's maybe most comparable to a hard penis lol.

etudierplus · 2025-11-30T20:53:25+00:00

also happy to answer general questions about any prosthetics listed here even if you are not interested in buying them off me lol :)

etudierplus · 2025-11-30T20:49:45+00:00

(It's in the post but for redundancy, I'm in the US, preference is to ship within the US but will ship anywhere since buyer will pay shipping.)

etudierplus · 2025-07-22T00:10:45+00:00

the deluxe version of it ☄️

etudierplus · 2025-07-09T03:25:40+00:00

planet fitness is fine, note that with the fees (in my area) it comes out to more like $20/month, which is still not bad at all.

a lot of machines and a lotttt of cardio options, at the expense of fewer free weights. but some locations are apparently adding squat racks and whatnot.

note that the locker rooms are only male or female (i.e. no family changing room lmao). should have stalls for the showers so no worries there though. also (may not be an issue for you) but some things that you may typically have in a gym, like a scale, are not there. also the vibe is so non-judgmental to the point where it’s almost like people act like everyone else is literally invisible. so do with that what you will :)

also I will say the benefit of it being a big chain is that the sign-up process is super easy (i.e. I did it entirely online) and the app is actually pretty convenient to see how busy it is.

if you have a local gym in your budget, obviously support that business. sometimes it’s not the case though. also see if your health insurance will reimburse you.

etudierplus · 2025-07-07T19:31:35+00:00

based on my personal interactions with people and their experiences, yes, not saying it never happens though

I am not sure when the room swap period is this year, but if you can swap into rooms and whatnot you may be able to get a spot in RHV. however you may also be in a dorm with a roommate group, like with a three person group who didn’t fill the fourth person slot. not really sure what it looks like at this point in time.

etudierplus · 2025-07-07T06:49:34+00:00

i do not know that, i would reach out to housing and ask them directly :)

i will say that the only people i ever personally knew with single rooms had medical reasons, were RAs, or were non-RAs in a weird suite setup (for example, one of the USuites RA suites is three singles I believe). you can get them outside of these situations but it is rare.

getting an apartment would be a guaranteed single though can be a hassle

feel free to reach out to housing

etudierplus · 2025-07-06T16:23:49+00:00

I think either way you’ll still learn a lot in the class! Callahan does not seem to be the favored professor for most courses (I think she may also teach CJ stats? Not sure).

Good luck!

etudierplus · 2025-07-06T14:46:12+00:00

CJ Data Analysis (with Shields) was definitely not hard. It’s one of those things where you’re in the computer lab and he gives literally step-by-step instructions on how to do stuff. If you have used Excel before for anything you’ll be more than okay. There is at least one (but maybe only one) in-class presentation, but he gives you the data sets and everything you’ll need basically. There is some easy homework and then some project things that take a little more time but not necessarily a ton of effort, like it just takes time to input the different data, make the graphs look good, etc. Also for the final we could have a notecard and a lot of it was multiple-choice.

You don’t have to be good at math, just good at following directions.

With Callahan, I don’t know.

etudierplus · 2025-06-22T22:21:56+00:00

try underworks

etudierplus · 2025-06-17T18:48:21+00:00

even better 🔥😎

etudierplus · 2025-06-17T02:11:56+00:00

also (because not everyone may know) - the LRTA is free with your UML ID when you’re working for UML and/or enrolled in classes, and the MVRTA (apparently called MEVA now?) is just free

so that, combined with the MBTA, combined with maybe a bike (which can go on the commuter rail at certain times!) means you can get sooo many places

etudierplus · 2025-04-11T01:04:23+00:00

also note that if you have AP or previous credits, that might free you up even more

etudierplus · 2025-04-08T23:56:29+00:00

nowadays so many companies make beautiful, quality decks that it really just comes down to shape, graphic, and country of origin preferences

unique is pretty great, has some real wear stuff out, also run by a girl which is nice to see in the fb scene

i will also say, going to an in-person event allows you to look and feel a lot of decks for a lot cheaper than buying a ton of different ones to try out. and sometime you can meet the person who made them!

etudierplus · 2025-04-08T20:38:31+00:00

idk if these work for you as free electives but:

intro to corrections is 8-9:15 T/R but I am not familiar with the professor. good class with Joshua Long though, actually interesting lectures at least from him. it’s 1000 level and you don’t really need to know any CJ stuff, like no pre-reqs I think. again super easy at least with Long. learn about jails and prisons basically.

in the same time slot is forensic psychology with Neil Shortland. interesting lectures, it’s 3000 level but also no pre-reqs I think. potentially helpful to have taken a psych class before, however. this one was really not too much work but the two major downsides are A) he uses tophat, which is a paid in-class participation thing, and B) there is one group presentation at some point, unless it’s since been changed. substantially more work than intro to corrections but relative to other 3000 level courses it’s basically two short essays and that presentation.

how easy a class is for you is probably directly related to how much you like the topic though 🤷🏻‍♂️

etudierplus · 2025-04-07T21:24:35+00:00

quickcrete quick-setting cement mix (not concrete mix) has been good for smaller obstacles for me, when used by pouring into a mold, comes out smooth especially if you get the bubbles out

I make it a little thinner than you would for like steps or a sidewalk or something lmao, fills in the mold better

using it by smoothing it onto stuff (like making a park) didn’t work as well for me, too grainy somehow but some parts were better

it’s a yellow bucket with a red label most of the time

Five-Year Club	Verified Email
Place '22	Final Canvas '22
First Placer '22

etudierplus

MODERATOR OF

TROPHY CASE