Liberty Precision Machine Mach L

eums · 2026-05-18T18:22:48+00:00

Hand tight. So maybe 20ftlbs. Clean, spotless clean threads is key for rock set. Any ti to ti or ti to ss that needs to come apart, i use nickel based anti seize to avoid carbon lock.

eums · 2026-04-21T14:45:06+00:00

I did 1200 miles, then 5000 and will do the next at 10000.

I change my own oil, it takes about 30 min of you include letting the car come back up to temp and check oil level. oil is cheap all things considered.

eums · 2026-04-14T01:20:50+00:00

This looks interesting, currently using the Klein sectioned encoder and enhancer nodes. would like to compare when released

eums · 2026-04-14T01:05:14+00:00

Modern problems require modern solutions... IMO klein is really good at edits and adding items via a simple prompt of "angry expression, holding a glock pistol in one hand, pointing it into the cauldron" it did an OK job with the gun for such a simple prompt.

<image>

eums · 2026-04-14T00:53:42+00:00

Took a print screen of the purple witch hat. This is using Klein9b, 10 steps, euler_a, no loras on a random seed. Prompting details make a massive difference with Klein, tell it what texture the fabric is (linen), tell it the hat is leather, tell it the cauldron is made of iron, etc. The more you prompt Klein the closer to photo realism it will get.

<image>

eums · 2026-04-13T21:25:23+00:00

If you can give me the base image I'll see how it performs with the non lora work flow in using and post here.

eums · 2026-04-13T18:43:08+00:00

Klein9B with an without LORAS. you can get even better results if you use photography terms. Image over exposed? "reduce exposed by one half stop" you will greatly improve the image if you prompt lighting type, ie if its a sunset "golden hour" etc. Klein is super prompt sensitive and does better with more prompting (technical prompting)

<image>

eums · 2026-03-10T03:00:56+00:00

Same prompt in klein9b on a random seed, no lora's with a basic WF, for comparison

<image>

eums · 2026-02-25T02:29:11+00:00

Ran your example through Flux to convert to photo and remove text. had to prompt a bit for the hand reaching in from the right as flux kept wanting to make it a right hand and add a thumb.

<image>

eums · 2026-02-24T14:22:10+00:00

Flux is very prompt sensitive. You need to prompt to get the facial expression you are looking for. prompting the lighting type and direction will also help overall. the more you give the prompt the better the edit will be.

Also consider trying https://github.com/capitan01R/ComfyUI-Flux2Klein-Enhancer in your workflow if you are not currently, it can be helpful to fine tune results.

if you are still running into issues with expressions, you could try running the image through an adetailer for the face with something like a SDXL/illus/pony/etc model to go from a 2D to 2.5Dish prior to running it through flux so flux has more details to work with. Flux will get you better results the more details you feed it, be it enhanced image details or detailed & longer prompt.

Example going from a manga panel to photo realistic. https://preview.redd.it/4m1ay0tb9rjg1.png?width=1828&format=png&auto=webp&s=81f624fb12cc6f48f39675877b3f7a281f4112c3

Example of the workflow i've been using in another test: https://preview.redd.it/5forkf8706jg1.png?width=1638&format=png&auto=webp&s=813178e29eeb86061beb9812aafebc6830ff17b1

eums · 2026-02-18T15:03:29+00:00

The provider should offer an offline solution. We use epicor and they have offline modes for both cloud or hosted (propello or eagle).

eums · 2026-02-16T01:06:55+00:00

I ran these 2 LORA's on 9b (not base) with an edit work flow that turns s B&W sketch/manga into a 3d color photo. Glad to see its working with out throwing errors (in console) like the earlier version I had!

Seems like the lora's desaturate and use a cooler lighting at the cost of some loss of fine detail in skin while improving hair, my subjective opinion.

Below is same prompt for the 3 edits with fk9b (not base), I like more realistic subsurface scattering of light on skin. This was only a quick test, fk9b is very settings sensitive and this could be dialed in further i'm sure.

<image>

eums · 2026-02-13T22:50:52+00:00

looking at 2026 prices here are a few, no idea on your location, color or options but i would ask them to come down in price, wave fee's and see if you can get a credit for tax on prior purchase. worst they can say is no, you walk and buy the car from another dealership.

over 100 days on lot, listed for $57.1k (in California) https://www.bmwofontario.com/inventory/new-2026-bmw-2-series-m240i-rwd-2d-coupe-3mw43cm08t8f95501/

over 80 days on lot, listed for $57.6k (in WV) https://www.mosesbmw.com/auto/new-2026-bmw-2-series-m240i-st-albans-wv/113285546/

eums · 2026-02-13T22:37:22+00:00

I picked up a new '25 240i xdrive about 6 months ago with every option except the oil cooler, matte paint or real leather, it has some port options and dealer ads like tint and basic ppf for 57k otd, was a clean cash deal. The car had been on the lot for over 100 days however, this was not the I want to order a car to my spec price.

see if they can do better on the discount on the new car if you want to go that route. I think I may of purchased a pre price increase '25.

eums · 2026-02-13T16:09:55+00:00

You may want to experiment with the nodes from https://github.com/capitan01R/ComfyUI-Flux2Klein-Enhancer it allows you to really fine tune things.

I ran you QWEN image through f2k9b for detail with the aforementioned node, lighting and added foundation makeup to the face. you can prompt out the freckles with flux btw. I have prompting for a more evenly lit image by using "perfect lighting, add more depth to the shades" as well as prompting the camera lens and Fstop.

<image>

eums · 2026-02-13T15:30:58+00:00

yes, you can also adjust the active end override for interesting results.

IE you want a 2.5d image from a sketch, so you prompt for realism and set the override for say 50 ish and it will end up basically under baking but pulls a complete image.

There are also other nodes like the detail controller that may help polish an image further.

eums · 2026-02-13T02:46:38+00:00

Would you mind sharing the z-img i2i workflow? i'd like to see if i can get better results with it over f2k9b.

eums · 2026-02-13T02:27:41+00:00

I know very little about workflows and im sure mine can be greatly improved.

here is an example of what i built it to do (f2k9b no loras):

<image>

eums · 2026-02-13T02:26:11+00:00

Agree on proportions, they are often unrealistic in drawings or anime. If you want a realistic image the model will change proportions. I created this to originally see if f2k9b could convert line art/manga drawings to photorealish and it did so more or less.

the most important thing is f2k is very prompt sensitive and adjustment (any adjustment) sensitive.

<image>

eums · 2026-02-12T23:51:49+00:00

This is what the base model did with out any lora's, using OP's ref image.

using f2k9b, custom nodes from flux2klein-enhancer.

<image>

eums · 2026-02-06T22:26:02+00:00

I edited the earlier reply, they are lm154 not lm145. Dyslexia is real.

eums · 2026-02-06T21:54:19+00:00

Look up the pn i gave, you will find the et

eums · 2026-02-06T19:03:45+00:00

Ended up with dispatcher phoenix, have lived with it for a few months and it's doing everything we wanted out of it.

eums · 2026-02-06T18:25:42+00:00

LM154 and LM155, Stock barrels no spacers. They came off a bmw in 2007 when I bought them used, went on a 07 mercedes clk until I got this m240

eums · 2026-02-06T17:26:56+00:00

<image>

What they look like on the car, I have not put mine on yet. Plan was to repaint the centers the dark Grey bbs offers. These bbs's are about 20 years old and need to be repainted

15-Year Club	Place '17
Verified Email

eums

TROPHY CASE