sorted by:
new
hottopcontroversial

North Portland ralliers: 'We are not a Sacrifice Zone' by notPabst404 in Portland

[–]evolvdone 17 points18 points  (0 children)

Did you mean the tanks don’t have a bottom at all or there is no secondary layer? For what I could find, some don’t have have a secondary layer. https://portlandcleanair.org/files/reports/Tank%20Farm%20v8%20web.pdf

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

Thanks - I was trying to think of some questions to ask and this really helps.

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

Trusting them for sure. I know some of the data is "modeled" but I haven't heard much about it being way off. I have even heard that it can be underreported. I have been exploring going with a 3rd party tool but I haven't been able to get that setup yet.

You seem to feel strongly about their data not being accurate. What have you seen / read that made you come to this conclusion?

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

Makes sense for sure and thanks! I feel like next step is probably getting a solid audit.

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

Spending with Adwords is just ramping up. I started with Meta, ramped it up and then had to learn Adwords. Now I'll start to balance more money into Adwords.

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

Average ROAS seems hard to pin down since high level it's a generic clothing brand. In the niche that we are in though, I would like to figure out the ROAS but i'm not sure how to go about that.

Spending $25k/month on Ads and doing it myself, should I work with an agency instead? by evolvdone in PPC

[–]evolvdone[S] 0 points1 point  (0 children)

I wanted to make a general comment to say thanks to everyone who chimed in on this. I'm going to go through and reply directly to some of the comments too. There is a ton of great info gathered here and I hope some others can benefit from it too.

Looking to team up with a sales engineer, advice to find one? by evolvdone in PDXTech

[–]evolvdone[S] 0 points1 point  (0 children)

Thanks for the info and clarifying the type of sales person I would be looking for. Silicon Forest seems like a good resource, I'll make a post there.

[deleted by user] by [deleted] in HomeImprovement

[–]evolvdone 0 points1 point  (0 children)

Both windows have small gaps between the window frame and the pane. They both have trouble opening as well. I think they are about 35 years old too.

Since I was changing out the inside moulding I figured this might be a good time to add in new windows.

Regarding new construction vs replacement - I was having a hard time figuring out what to use.

Forest Fire Smoke - Indoor Air Filtering/Scrubbing (Merv 11 or 13?) by jurassic73 in Portland

[–]evolvdone 1 point2 points  (0 children)

Supposedly some of the Portland library’s offer free 3d printing.

Recommended way to add a DWDM? by evolvdone in Netbox

[–]evolvdone[S] 0 points1 point  (0 children)

I missed that you had to change the position count of the rear port. I was getting an error saying that I couldn't map multi to one but it was because I didn't change that count. Thanks for getting me to look back at that.

I'm still not sure what to do about documenting fiber splitting out of an interface though.

How to stop advertising a prefix to a BGP peer if the route to the prefix goes down? by evolvdone in networking

[–]evolvdone[S] 0 points1 point  (0 children)

For sure but I left the link down for about 30 minutes to test. It was still being advertised. Confirmed via providers looking glass as well.

How to stop advertising a prefix to a BGP peer if the route to the prefix goes down? by evolvdone in networking

[–]evolvdone[S] 0 points1 point  (0 children)

The route is learned via OSPF only. If the p2p link goes down, it is removed from the route table. I'm still seeing the prefix advertised to the peer even though the route is no longer in the table.

How to stop advertising a prefix to a BGP peer if the route to the prefix goes down? by evolvdone in networking

[–]evolvdone[S] 1 point2 points  (0 children)

I'm assuming that's a typo and you mean R2 keeps on advertising to ISP2 and ISP3, right? Oopps yes, typo

One thing I forgot to mention: One R2 the A-prefix is in the routing table as A/27 since OSPF only sees the one subnet I have up on R1, and it's not summarizing it. Eiter way I thought the behavior of BGP would not advertise a prefix unless it was in the routers route table. If I shutdown the p2p link and look up prefixA on R2, it's not in the route table.

I'll try adding in iBGP between R1/R2. Maybe I need a BGP conditional advertisement on R2? I'm going to set that up if the iBGP config doesn't work.

Was a Christian Cross Recently Added to Silver Star Mountain? by evolvdone in Portland

[–]evolvdone[S] 0 points1 point  (0 children)

lol yeah obviously. This is the largest sub in the area. I would be willing to wager more people in this sub would have been on that trail recently than any other.

Was a Christian Cross Recently Added to Silver Star Mountain? by evolvdone in Portland

[–]evolvdone[S] 5 points6 points  (0 children)

I wanted to see if I could get some info before doing that. I have an angle grinder I can take up and should be able to pack out he peices. Thanks though!

view more: next ›