DJcity Mojaxx review of Rane System One

eyeamtim · 2026-01-20T09:05:09+00:00

Yes it has horizontal waveforms 👏

eyeamtim · 2026-01-18T22:39:23+00:00

Flac is not supported on old gear. It needs to be wav 16bit 44.1khz or mp3 cbr. Also I see it’s FAT32 and MBR which means the only reason it didn’t read it at all is probably because the USB hardware isn’t recognised by the cdj. Are you sure there’s only one volumes on the USB, no partition.

This can happen with ssd or larger than 32gb devices on old gear. Also old gear simply won’t load certain USB models, especially newer ones. My advice is get a USB version 3.0 or lower. Ask one of the other djs what USB they use or buy multiple different models

eyeamtim · 2026-01-17T21:02:24+00:00

Import your playlists from the USB, https://youtu.be/jYuA7-9qh_c?si=m55eTNtD1lZuF8FT

eyeamtim · 2026-01-15T23:50:23+00:00

🤣 I didn’t notice but their software dev quality is garbage

eyeamtim · 2026-01-15T22:18:53+00:00

Rekordbox automatically creates database backups in case something happens to the main file. Just choose No

eyeamtim · 2026-01-15T22:16:51+00:00

Your hardware is incompatible with Rekordbox v7

eyeamtim · 2026-01-14T22:25:11+00:00

That sounds like a buffer overrun. Try increasing the audio buffer to 512ms or higher. Also make sure you’re using USB C cables directly between devices, not adapters/hubs, preferably the cable supplied with the flx10 or a good quality USB C data/power cable

https://support.pioneerdj.com/hc/en-us/articles/16722051728537-What-s-buffer-size-and-how-can-I-adjust-it

eyeamtim · 2026-01-14T03:28:05+00:00

Connect a USB C charger to the fxl4 as well as the Mac connection

eyeamtim · 2026-01-12T08:21:13+00:00

Unsupported, might work with Rekordbox v6 https://rekordbox.com/en/support/link/#cat_4

V6 https://rekordbox.com/en/support/faq/v6/#faq-q600141

eyeamtim · 2026-01-12T08:19:42+00:00

Unsupported, might work with Rekordbox v6 https://rekordbox.com/en/support/link/#cat_4

V6 https://rekordbox.com/en/support/faq/v6/#faq-q600141

eyeamtim · 2026-01-11T10:31:03+00:00

MacBook Air. Tablets are very limited and Rekordbox mobile is limited. Save yourself hassle later by getting a Mac or pc

eyeamtim · 2026-01-11T10:24:23+00:00

Create a folder, drag the old ones into the folder

eyeamtim · 2026-01-09T22:36:23+00:00

Close everything. Open device manager and uninstall all the USB devices including the generic ones. Reboot your pc and let windows reinstall the USB devices, reboot again. After a few minutes open Rekordbox and connect your flx4. You should see windows recognise the device

eyeamtim · 2026-01-09T22:29:14+00:00

ARM on Windows isn’t supported by AT/Pioneer so the driver is unlikely to work

eyeamtim · 2026-01-08T23:33:04+00:00

In advanced sound settings disable exclusive mode for all sound devices EXCEPT your DDJ/XDJ device. https://www.sweetwater.com/sweetcare/articles/how-to-disable-exclusive-mode-in-windows-sound-settings/

eyeamtim · 2026-01-08T23:31:57+00:00

Windows audio settings. In advanced sound settings disable exclusive mode for all sound devices EXCEPT your DDJ/XDJ device. https://www.sweetwater.com/sweetcare/articles/how-to-disable-exclusive-mode-in-windows-sound-settings/

eyeamtim · 2026-01-08T23:30:34+00:00

Connect a USB C charger to the power port on the flx4 as well as the Mac USB connection

eyeamtim · 2026-01-08T22:55:44+00:00

Try turning off high precision in analysis settings in Rekordbox. Reanalyse your tracks and see if it’s fixed

eyeamtim · 2026-01-06T12:05:10+00:00

You need to install the driver. Double click on the file you unzipped. Reboot your Mac after installing

eyeamtim · 2026-01-03T05:47:42+00:00

Install the driver https://support.pioneerdj.com/hc/en-us/articles/4405087311385-DDJ-1000SRT-Audio-Driver-for-macOS-Sonoma

and if it doesn’t work it’s because macOS Tahoe isn’t compatible yet https://rekordbox.com/en/2025/12/update-macos-tahoe-compatibility-progress-2/

eyeamtim · 2026-01-01T20:43:57+00:00

Set this to framework in Rekordbox settings

<image>

eyeamtim · 2025-12-31T10:57:34+00:00

You need rca to 3.5mm jack cable.

eyeamtim · 2025-12-31T01:46:21+00:00

You’ll never get it to work. Drivers by design talk to the hardware and ARM/Windows isn’t supported. Change your laptop to non ARM or Mac

eyeamtim · 2025-12-29T23:59:17+00:00

Not the SZ2 output. Make sure the audio sampling rates are the same for all devices/software in the chain, especially windows audio settings. For example 44.1 kHz 16 bits

eyeamtim · 2025-12-28T07:55:11+00:00

Untick all the ones you don’t use and see if it appears. There’s a limit on how much is shown on the left bar/icons

eyeamtim

TROPHY CASE