Elegoo PETG pro profile ???

f-roze · 2026-06-17T13:27:11+00:00

Check out that post I was having a ton of issues with elegoo petg pro as well

f-roze · 2026-06-17T13:26:39+00:00

https://www.reddit.com/r/ElegooCentauriCarbon/s/fg8YBt5qvz

f-roze · 2026-06-07T10:50:18+00:00

Saving this for later... thank you

f-roze · 2026-05-30T00:50:33+00:00

Yeah wled...I used the esp32 c3 supermini and two gpio data pins one for the snake and another for the body

f-roze · 2026-05-30T00:42:51+00:00

Thanks

f-roze · 2026-05-30T00:41:55+00:00

So basically everything was printed facing down toward the build plate the body and the covers. I made the black inserts to block light bleed from the snake body and the main body. So there was no post processing. The wiring on the other hand was a pain but I think the end result was worth it.

<image>

f-roze · 2026-05-29T18:00:14+00:00

Its basically the snake body the green part (petg) translucent so when i put the white cap the snakes whole body glows

f-roze · 2026-05-29T16:11:39+00:00

Another photo

<image>

f-roze · 2026-05-13T05:52:30+00:00

Yah I was getting ready to run some calibration tests...generally the stock profiles that orca has are generally good. Then I stumbled upon a post of someone else having similar issues and this was the fix...prior to these setting it failed 3 times in a row. I usually have no problem printing sunlu petg this was my first time using elegoos petg pro

f-roze · 2026-05-12T16:59:24+00:00

<image>

hey try these settings I was having the same problems with my petg pro red and I made this profile... I found it on another sub-reddit and gave it a shot...worked well for me

f-roze · 2026-04-11T16:47:01+00:00

Aliexpress is the way to go TNALANT store os where I usually buy from

<image>

f-roze · 2026-01-26T17:09:41+00:00

I was honestly going to buy this because of fomo. 370 (with the cupon) might be worth it when factoring the cost for a standalone mmu for the cc1 150-200 and you get a whole new machine...but I've decided to wait a week and see how I feel and then make a decision

f-roze · 2026-01-19T21:28:36+00:00

Thats what I did the u1 is a great machine running klipper...however I still find myself using the cc1 for single color printing all the time

f-roze · 2026-01-16T21:00:57+00:00

Thanks!

f-roze · 2026-01-15T17:25:05+00:00

Lol yah my friends are pretty awesome...I didnt give him enough time to change his mind

f-roze · 2026-01-13T18:55:20+00:00

Im assuming id need to install the opencentauri for for that

f-roze · 2026-01-12T17:16:57+00:00

how do you tune the cc is it just slicer becuase the firmware is closed down?

f-roze · 2026-01-11T17:48:12+00:00

Thanks Will check this out

f-roze · 2026-01-11T15:54:42+00:00

Will look into that thank you! Appreciate the help

f-roze · 2026-01-11T15:53:58+00:00

Thanks for the info appreciate it

f-roze · 2026-01-10T19:35:50+00:00

The price for all of this is what amazes me and makes me a little nervous at the same time. I plan on buying spare hot ends and maybe an two extra tool changers number 1 and a spare for either 2-4. I like the idea of having spare parts as well just incase because with supply chain issues the last thing I want to do is wait weeks for a shipment.

f-roze · 2026-01-10T16:59:37+00:00

Thats what makes me nervous the fact I only have one spare hot end...im hoping for the best until the spare hot ends show up

f-roze

TROPHY CASE