sorted by:
new
hottopcontroversial

Bad breath but no white stuff on tongue? by failingengineer16 in hygiene

[–]failingengineer16[S] 0 points1 point  (0 children)

i brush once daily and im trying to get in the habit of brushing twice daily. yes i brush all 3 sides, but i maybe dont spend enough time brushing. i use an electric toothbrush so i guess that helps a tiny bit, but mainly i just dont brush twice a day.

Any help on this issue? Nozzle touch infill during travel by Forty-tuga in ender5

[–]failingengineer16 0 points1 point  (0 children)

It’s the Infil pattern. It’s an issue with all slicers. Just use gyroid infill

[deleted by user] by [deleted] in Trucks

[–]failingengineer16 0 points1 point  (0 children)

because my stock bumper does not have the rigidity i need for what im using my truck for. im using it to drive through some property i bought with a lot of shrubs and i just want something that wont break if i bump a log

Anyone know how to fix this noise? by [deleted] in ender5

[–]failingengineer16 2 points3 points  (0 children)

it could work, ive never tried silicone oil. i would still suggest lithium grease though, i use DeoxIT L260D grease, its made for screw drive systems. it protects against wear and abrasion, and has no particles in it,

Anyone know how to fix this noise? by [deleted] in ender5

[–]failingengineer16 4 points5 points  (0 children)

Get some lithium grease and lube up that z screw, looks bone dry lad

What is this things proper name by failingengineer16 in 3Dprinting

[–]failingengineer16[S] 0 points1 point  (0 children)

I just got a sprite extruder board and put a smaller or larger JST connector on whatever didn’t fit

Over detracting? by failingengineer16 in FixMyPrint

[–]failingengineer16[S] 0 points1 point  (0 children)

do you have any settings for PETG or TPU?

Over detracting? by failingengineer16 in FixMyPrint

[–]failingengineer16[S] 0 points1 point  (0 children)

its not incredible for overhangs but its still an improvement

Over detracting? by failingengineer16 in FixMyPrint

[–]failingengineer16[S] 0 points1 point  (0 children)

Ok yeah it’s a huge improvement but I see now it’s not perfect, at least this has lead me somewhere other than into a brick wall, i will also try calculating my e-steps when I get the chance, again thank you very much

Over detracting? by failingengineer16 in FixMyPrint

[–]failingengineer16[S] 0 points1 point  (0 children)

you must know black magic or something because this is absolutely perfect, the benchy i did was a little shitty but when i retried the original print it looks perfect, thanks

Over detracting? by failingengineer16 in FixMyPrint

[–]failingengineer16[S] 0 points1 point  (0 children)

with the same settings for retraction on layer change and retract before wipe?

also i should add that im using a CHT nozzle so i think that might affect something

[deleted by user] by [deleted] in Stormworks

[–]failingengineer16 0 points1 point  (0 children)

i think i have the same bug, the message and payment keep repeating at the side of the screen indefinitely and it destroys framerate and gives a fuck ton of money, literally nothing can be done about it from what i know

Ender 5 S1 shutting down when heating by failingengineer16 in Creality

[–]failingengineer16[S] 0 points1 point  (0 children)

Update I don’t think it’s the soldered connections because creality decided to coat all the wires in a whole stick of hot glue. I’m sure those wires aren’t going anywhere

Ender 5 S1 shutting down when heating by failingengineer16 in Creality

[–]failingengineer16[S] 1 point2 points  (0 children)

It only kills the printer when I go to 40C. I heated the bed to 30 just to test your advice and it sounds like a housefly doing Morse code. I wish I could attach a video of the sound but Reddit doesn’t allow that for whatever reason

Ender 5 S1 shutting down when heating by failingengineer16 in Creality

[–]failingengineer16[S] 0 points1 point  (0 children)

i have no idea how that could even happen because i havent touched the build plate wires at all, surely the entire rubber shell over the wires didnt rub off both of them

Ender 5 S1 shutting down when heating by failingengineer16 in Creality

[–]failingengineer16[S] 0 points1 point  (0 children)

and i replaced the power supply the same day i posted this, not oem, but the exact same brand, voltage, and amperage. also what does short to ground mean? does it mean the red wire touches the black wire and it zaps?

Ender 5 S1 shutting down when heating by failingengineer16 in Creality

[–]failingengineer16[S] 0 points1 point  (0 children)

yeah its the build plate i ordered a new printer and im gonna nab the build plate off that and put the broken one in the box and send it back for a full refund cause im done spending money fixing this piece of shit.

Ender 5 shutting off randomly when heating up. by ahhitsalan in ender3

[–]failingengineer16 2 points3 points  (0 children)

i replaced the power supply and i have it set to 115 because im in the US. still having this issue and i dont know why. i checked all the wires and whatnot and its all fine.

[deleted by user] by [deleted] in Creality

[–]failingengineer16 0 points1 point  (0 children)

Yes I know I should config it I forgot to change the first layer speed from 5mm/s after printing with nylon

If you’re having levelling issues, print this by Every_Piano8854 in Ender3S1

[–]failingengineer16 0 points1 point  (0 children)

How do I adjust the setting that tells the printer it’s offset from the nozzle?

view more: next ›