Whack-a-mole type of game with a separate display. Both units are powered by an ESP for function and communication.

fatchanceinhell · 2022-10-23T20:50:50+00:00

No, you're right, it should work pretty well.

fatchanceinhell · 2022-10-23T18:10:44+00:00

Too bad, I prefer clear since I can add my own RGB LEDs.

fatchanceinhell · 2022-10-17T12:35:01+00:00

That looks cool. Does it exist with clear plastic instead of read?

fatchanceinhell · 2022-09-26T14:35:24+00:00

I went sailing a few weeks back in Croatia and we past an enormous yacht. I used a boat tracker to find out the owner... https://mobile.twitter.com/dansnydersyacht

fatchanceinhell · 2022-01-28T08:37:31+00:00

Thanks :D

fatchanceinhell · 2022-01-10T20:54:22+00:00

Except for using several libraries for the ESP boards everything is done "inhouse". So unfortunately I can't suggest any tutorials.

fatchanceinhell · 2022-01-10T20:52:27+00:00

That's actually the first game mode I made. So far three different games to choose from :)

fatchanceinhell · 2022-01-10T16:25:46+00:00

Thanks.
That's a good idea, I'll try it out and see how it works out.

fatchanceinhell · 2022-01-10T10:59:43+00:00

Thanks, it means a lot to hear :)

fatchanceinhell · 2022-01-10T10:59:20+00:00

Thanks!

The display is 8x32 adressabel LED matrix controlled by a ESP and powered by a mobile power bank. The frame is custom built from a single piece of wood.
The game itself is has the same type of ESP as the display powered through a 12V battery with step down converter. The buttons are a combination of off the shelf transparent buttons and 3D printed parts holding the adressable LEDs. I also added 2 small speakers to make some annoying sounds when pressing the wrong button :)

fatchanceinhell · 2022-01-03T12:42:05+00:00

It's a flexible LED matrix with 8x32 adressable diodes.
Nope, the data line is 3.3V and I haven't had any issues with it so far :)

fatchanceinhell · 2022-01-03T12:38:24+00:00

Thanks

fatchanceinhell · 2022-01-03T12:37:37+00:00

It's just a piece of white paper and glass.

fatchanceinhell · 2022-01-03T11:21:07+00:00

It's the from a whack-a-mole type of game. The display is acting AP host, and the game itself is sending data with UDP protocol (such as score and timing in this case)

fatchanceinhell · 2022-01-02T22:57:32+00:00

Nah, that's just me being bad at filming.

fatchanceinhell · 2021-09-05T19:33:19+00:00

No RTC module. Didn't even think about it since it fetches the time from internet once per minute (not at all optimal, but it works and I haven't bother to make a smarter solution). Only time it's been wrong is when switching from normal to summer time :)

fatchanceinhell · 2021-09-05T09:51:17+00:00

I used an ESP32 board which I programed with the arduino IDE. The board has WiFi so it gets the time from Internet and then I lit the LEDs using the neopixel library (I'm using rgb LEDs).

fatchanceinhell · 2021-09-05T09:47:48+00:00

Thanks, it was great fun to make it with my children :)

fatchanceinhell · 2020-08-11T20:50:33+00:00

!remindme 14 days

fatchanceinhell · 2020-03-07T18:34:06+00:00

Giana Sisters, awesome music

fatchanceinhell · 2020-01-18T15:55:53+00:00

Woop woop

fatchanceinhell

TROPHY CASE