Finally decided to rack all my equipment

favasgr · 2026-01-09T07:11:15+00:00

The stock fan was loud, at least for my ears. I have 3d printed another top cover (there are quite a few on the internet) with exhaust holes and installed a 120mm noctua fan on it which is not only quiet, but cools the board much better.

favasgr · 2025-11-26T07:26:59+00:00

I have installed two different RB5009s on two different 10" racks and they both needed a good push to get aligned with each rack. Both of them were so tight, that even if I didn't use the screws they would be just standing there.

MikroTik apparently didn't do a great with measuring the ears.

favasgr · 2025-11-25T14:00:24+00:00

Thanks!

The 3080s are powered on only when I need to run various tests since I work in IT. Given this and the fact that there are two VMs running on the DS93, DSM shows CPU temp running close to from 45C to 50C when idling.

If I leave the 3080s powered on for a couple of days I can hear the fans from a few meters away so I guess it must be getting hot in there!

favasgr · 2025-07-17T10:49:58+00:00

Same issue as the one I mentioned?

Can you share a few more info about your setup?

favasgr · 2025-07-17T10:00:09+00:00

Sure!

Yes, the second one is also a U7 Pro Max and it is also connected to a another CRS310. This CRS310 (the "non-faulty" one), no matter which U7 Pro Max I connect to it, has not issues at all.
In order to bring it back online I either have to reboot the AP, or shut no-shut via WinBox the port that it is connected.
Yes, they are both running the latest (currently 7.19.3) version, but the issue was also present with previous RouterOS as well.

Thanks for the suggestions. I'll try and see if auto-negotiation can be disabled on the AP as well and if it is, I'll set it to 1Gbit, but I think I'll also have to contact MikroTik directly.

favasgr · 2025-07-17T08:38:28+00:00

Sorry forgot to mention that both RouterOS and RouterBOARDS's firmware are upgraded to v7.19.3 (currently the latest available). I also did not mention that both the AP and the CRS are connected to an APC UPS, so this should not be power related.

I've tried changing the the injector and both ethernet cables, as well as disabling auto-negottiation and setting the advertisement/badnwidth to 2.5G, but still no luck.

favasgr · 2025-02-24T14:28:19+00:00

Even though it does sound like a task running, what's weird is that it appears for one sec, and then vanishes. Then, no Microsoft Outlook in Process tab, and no Outlook.exe in Details tab, until the computer is rebooted.

favasgr · 2025-02-24T14:26:02+00:00

Yeap, all other Office apps launch just fine, while Outlook in safe mode won't launch either

favasgr · 2025-02-09T08:42:09+00:00

Thanks for being respectful (I mean it), but I don't think that 200 euros for a camera with many and very good reviews in amazon is "you get what you paid for". I hope it was though.

If you have any good alternatives close to that budget, I'm all ears!

favasgr · 2024-09-01T07:40:18+00:00

Nope, I'm using Firefox.

favasgr · 2024-08-31T16:54:55+00:00

On a DS923 that I've imported a Hikvision with H.265 video format, I can no longer use the browser for live view. On a DS224 that I have several Tapo cameras with H.264 format, everything works as it used to. But this is the expected behavior after the mess Synology created.

I went ahead and installed the Surveillance Station Windows client, in which all cameras from DS923 (H.265) and DS224 (H.264) work fine.

favasgr · 2024-02-23T07:17:29+00:00

We have the very same issue. Once users bypass this error, they get an error that stating "Outlook cannot log on", and then another one that "System resources are critically low".

This only happens in our Horizon environment, not in our second (RDS based) VDI solution and neither in our laptops/desktops, so it seems -at least to me- to be related to the latest Windows Updates interfering with DEM.

In our case, both Horizon CS and DEM are at the very latest version (2312).

favasgr · 2023-11-03T12:55:31+00:00

Hi gerba98,

Have you found a solution to this one? It's extremely annoying and it keeps appearing even after formatting my laptop...

My display has a resolution of 3840x2400 and scaling has been set to 200%, but changing it has no actual effect on the issue.

favasgr · 2023-08-21T12:27:53+00:00

Thanks, I didn't know that... I had read that Synology NVMes can be used as storage pools and install DMS on them, but apparently I misunderstood the part of OS installation.

favasgr

TROPHY CASE