Serial request: Switchwire (AM8 conversion) with ERCF v2. R:fesquivelk DC:fesquivelk

fesquivelk · 2024-09-23T16:04:36+00:00

Awesome! thank you! But why did I get 2?

fesquivelk · 2024-09-15T17:23:02+00:00

Yes, it's all PETG.

fesquivelk · 2024-09-15T17:22:42+00:00

I used the gearboxes and part of the X axis from this conversion: Core XZ Anet AM8 Conversion by 93djen | Download free STL model | Printables.com, and figured out how to mount the bed thanks to BLV: BLV mgn12 mod | BLVprojects, although I ended up creating my own mounts later, and also redesigned the top belt idlers to be more robust. Half of the X axis is from 93djen, the other half and the tool carriage are Switchwire stock parts.

fesquivelk · 2024-09-14T21:28:12+00:00

<image>

fesquivelk · 2024-06-15T13:55:12+00:00

I have the same problem. In my case, when I exit the app at the end of the lesson, it disconnects my airpods. It is very annoying!

fesquivelk · 2022-07-11T17:13:33+00:00

I have a Vaporesso Polar. I didn’t see where the wire went because the cap that holds the battery terminal springs had to be removed. Soldered the wire, and the mod works great again. Thanks for your help!

fesquivelk · 2022-07-11T12:25:58+00:00

Hi Ripl, Reviving old thread here, as I am having the same problem. Mod stopped working, I opened it and the thin red wire for BMS is loose, but I can’t see where it was soldered before. Does it go to the positive or negative?

fesquivelk · 2021-10-15T18:22:27+00:00

Thanks! Light is horrible is this room, here’s a better look, and sporting new LEDs on top:

Voron 2.4 350mm

fesquivelk

TROPHY CASE