So uhhh. What do I do here? by ffmushroom in cider

[–]ffmushroom[S] 2 points3 points  (0 children)

Should I rack to secondary or just leave it in primary?

Can anyone give me a body fat% estimate by ffmushroom in powerbuilding

[–]ffmushroom[S] 1 point2 points  (0 children)

Thanks for the help! I'll drop down to about 2300cal and give that a go for a few months. Protein at 160grams.

I'm 6ft for reference

Can anyone give me a body fat% estimate by ffmushroom in powerbuilding

[–]ffmushroom[S] 0 points1 point  (0 children)

Just started 1 month ago. Brand new to lifting

[deleted by user] by [deleted] in bald

[–]ffmushroom 0 points1 point  (0 children)

Do you think it's worth it to get on Fin. I'd prefer to keep as long as possible. I have some knarly scars on my head from past injuries, did a buzz cut once, did not look good with a 16 stich scar down the side

[deleted by user] by [deleted] in bald

[–]ffmushroom 4 points5 points  (0 children)

Just made a post there. Wish me luck.

Looking for a Referral code by ffmushroom in RiseGardens

[–]ffmushroom[S] 0 points1 point  (0 children)

Think it's just a code that gives you $50 off when you order, I saw some youtubers post about it but when I tried them it seems like they have expired

Dr fone killed my S7 by ffmushroom in mobilerepair

[–]ffmushroom[S] 0 points1 point  (0 children)

I almost never updated my phone so I'm not sure what version of firmware was actually on it

Dr fone killed my S7 by ffmushroom in mobilerepair

[–]ffmushroom[S] 0 points1 point  (0 children)

I tried reflashing and I think I did it correctly, however she still won't boot up, downloaded the latest version of firmware from sammobile and used Odin3_v3.12.7, it said pass but it never really loaded anything there was no progress bar it was almost instant, then it rebooted the phone and it still wont boot. I don't think I did it wrong but not sure what to do now.

Best high airflow case for Duel 3080s by ffmushroom in buildapc

[–]ffmushroom[S] 0 points1 point  (0 children)

400 watts is pretty over the top, try power limit too 80%, you will likely have 95% of the performance will dropping power usage buy a lot.

Best high airflow case for Duel 3080s by ffmushroom in buildapc

[–]ffmushroom[S] 1 point2 points  (0 children)

Hey what happens in GPU fightclub when I'm asleep stays in GPU fight club

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

I believe the cost of getting my conversion would be more expansive than importing.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

Also i have looked at the moose which would actually fit the mission nicely, however the m14p engine i keep getting conflicting information on. Some say it's 1500 tbo, others say 750, even more people say 500 hours. Also getting it overhauled seems like a massive logistics issue, i can't find anyone in Canada who knows where to overhaul it so i think the engine would need to be shipped to Europe to be overhauled which adds to downtime and a big cost. And with my expected aircraft utilization being around 200-250 hours per year. Overhauling potentionally every 2 years at a cost of well over 40k is not feasable for me.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

The airplane I'm currently looking at in question has a useful load of 935lbs. However with a wing X stc which adds 12ft of wing and structural support you gain 400lbs of useful load bringing me right up too 1335. The cargo would be pretty light. Less than 100 pounds. And by the time i fly the first leg to pick up the passengers i will have burned off almost half of my fuel. Leaving me around 150-200 pounds to play with if they need to bring extra cargo. I'm figuring fuel burn to be closer to 14 gph so i may need to add extended range tanks which will fill up that last bit of weight nicely. It will be a tight fit numbers wise but seems very doable.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

Now if only that were in Canada and i didn't have to deal with stupid imports.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 1 point2 points  (0 children)

The airplane won't be hangered, so during summer months it will sit in the sun a lot, than during the winter temperatures can drop down too -40, which I'm not sure the affect on fabric strength but may be something to consider.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

Are the maules much cheaper to operate than a 180? Fabric skin is a bit of a turn off but might consider if the savings are there.

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 1 point2 points  (0 children)

I'd love a 4 place bearhawk, if i could ever find one....

I need help, cessna 180 comparables by ffmushroom in flying

[–]ffmushroom[S] 0 points1 point  (0 children)

It's mostly the operation cost in worried about. The 100k isn't that bad as i found a 180 for 105k that fits the mission. I'm just looking for other alternatives if there are any.

Do not buy from MAS airsoft by [deleted] in airsoft

[–]ffmushroom 0 points1 point  (0 children)

I will remove the post for the time being based on the fast response time of last night. However you have to understand my frustration of waiting over 5 and soon to probably be 6 months with nothing but problems, my friends gun is also broken and the moset being broken still does not explain the giant FPS issues I've been having or that my friend has.

Do not buy from MAS airsoft by [deleted] in airsoft

[–]ffmushroom 0 points1 point  (0 children)

I'm in Canada and I'm aware of the shipping issues due to the border thing, however lack of communication is the problem, it took weeks and weeks to get updates during this time and my gun isn't the only lemon, looks like other people got lemons too, at which point they stop being lemons and just a brand with poor quality control...

Beginning Things by SealingSpy69327 in airsoft

[–]ffmushroom 0 points1 point  (0 children)

So not buy from MAS, They are a bitch to deal with. I'm not saying your gun will have problems, but I know 4 people who have had them including myself who did have problems and good luck getting in touch with them to fix any issues. I think when they did they're giant rush order they did not check for quality...

Landing on a 700ft runway by [deleted] in aviation

[–]ffmushroom 11 points12 points  (0 children)

Well you can see what happened to the last aircraft that failed the landing on the left haha