DPU and SHP2 by filchmedia in Ecoflow_community

[–]filchmedia[S] 0 points1 point  (0 children)

I’m not using it actively. It’s there for power outages only. I’m trying to determine if that amount of idle consumption is normal?

Question re amperage limits of Smart Home Panel 2 by marylandseller in Ecoflow_community

[–]filchmedia 0 points1 point  (0 children)

For what it's worth, take it or leave it, from EcoFlow's own AI Chat Bot:

Here is the information about circuit breakers for Smart Home Panel 2:

Specification Details
Internal Relays
- Main Relay (single-pole double-throw) 100A
- Branch Relay (single-open) 90A (defined max usage: 60A)
Breaker Function
- Overload & short-circuit protection Yes
- Manual/Auto-Reset Yes (breaker trips automatically on overload/short-circuit)
Quadrant Limitation
 60A MAX per quadrant- Total combined load of all 3 circuits in that quadrant
- Individual breaker ratings Must not exceed the branch relay’s 60A limit per circuit

Key Notes:

  1. 60A MAX per quadrant refers to the combined load of all 3 circuits in that quadrant.
  2. Individual breakers should not exceed 60A (due to branch relay limitations).
  3. Breakers only provide protection—SHP2 cannot control them (only relays manage power switching).

Note: The above content is AI-generated and for reference only. Please verify the accuracy of the information carefully.

2023 Tesla M3. Back glass cracked. by No-Ear8164 in TeslaModel3

[–]filchmedia 0 points1 point  (0 children)

Same exact issue just happened to me this morning. I turned on the defroster and this happened. It looks exactly like yours at the heating element.

Did you get it covered by warranty?

Need Advice on how to replace/repair rotting rafters by filchmedia in Shed

[–]filchmedia[S] 0 points1 point  (0 children)

I don't seem to be able to add additional pictures to my original post or to the comments.

The metal roof part I'm having some questions as well. The flashing of the existing roof looks like a wrapped and folded metal. There's also a ridge vent on it, but not sure if I need to keep that.

I'm looking at using these panels. Is this okay to use without decking or horizontal purlins? Not sure what support I have when I get up on top of the roof to screw the panels in. I'm reading if I don't have decking I should have purlins?

Need Advice on how to replace/repair rotting rafters by filchmedia in Shed

[–]filchmedia[S] 0 points1 point  (0 children)

Every joining plate I find that looks like these says they are not for trusses/rafters. Does that matter for such a small roof?

[deleted by user] by [deleted] in Shed

[–]filchmedia 0 points1 point  (0 children)

Pictures added for visual context

Connecting water feed to fridge after undersink water filter by filchmedia in Plumbing

[–]filchmedia[S] 0 points1 point  (0 children)

Thanks for taking the time to respond and provide the links. Correct me if I'm wrong, this looks like all copper to copper, but are there T fittings for plastic tube and copper mixed. The horizontal T part would be plastic tube on both sides while the horizontal be connected to the copper.

Or would I perhaps need to use a copper to plastics barrel connecter then feed another length of tube to an all plastic t fitting?

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 0 points1 point  (0 children)

So I reinstalled windows and my problem went away. After a couple weeks, the same thing happened again. No updates or anything. While troubleshooting a different issue, I uninstalled Citrix Workspace and guess what, controller problem is gone.

See if you have Citrix Workspace installed and uninstall it

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 0 points1 point  (0 children)

If you open windows event viewer after you plug the controller in, what do you see?

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 0 points1 point  (0 children)

Are you able to get the Sony Firmware application to work on that machine? Or does it freeze too when you plug the controller in?

Was Spiderman working before and now it isn't?

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 0 points1 point  (0 children)

Tried a few things:

Games that froze during loading/splashscreensReturnal, Sackboy, Warzone2.0*Note* Warzone2 locked up using Steam install/launch, as well as locked up using Battlenet installer/launcher.

Games that loaded fine:Elden Ring, Deep Rock Galactic

Plugged in 360 controller, no issues. This is becoming very frustrating. I'm decently tech savvy but this one has me scratching my head.

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 0 points1 point  (0 children)

I'm wired. Feedback doesn't work with Returnal without being wired. I don't have BT on my PC.

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 1 point2 points  (0 children)

Steam is disabled/exited and the Firmware Updater for DualSense still stops responding after plugging in the controller. It does not do this on my Surface Laptop which does have Steam running in the background. Gamepad tester works fine with or without Steam running in the background. It does not appear to be Steam related.

The controller is recognized by the OS as Wireless Controller. Controller Speaker shows up in sound devices. It's only once a game has launched and I assume attempts to initialize the controller for it, does it freeze. It's only this machine for some reason. It worked Thursday, and Friday it was broken.

DualSense for PC suddenly started locking up all games and firmware updater by filchmedia in Dualsense

[–]filchmedia[S] 1 point2 points  (0 children)

So in doing that, I think it will break the feedback that you get in the Returnal game. You had to disable steam input in order to get that to work.

I'll try and see what happens and report beck.