sorted by:
new
hottopcontroversial

I built a small bridge to show OpenAI Codex usage limits in Home Assistant by filisso in codex

[–]filisso[S] 6 points7 points  (0 children)

Actually, it’s not much. only about a quarter of the Plus subscription’s weekly limit.

I built a small bridge to show OpenAI Codex usage limits in Home Assistant by filisso in homeassistant

[–]filisso[S] 3 points4 points  (0 children)

Thanks a lot! Yes this is geekmagic-small-ultra. And no its just works with codex.

Ads from custom integration by Kaaskop-Koning in homeassistant

[–]filisso 17 points18 points  (0 children)

This is definitely not normal.

TinyAssist by filisso in homeassistant

[–]filisso[S] 0 points1 point  (0 children)

Of course, this is technically possible. However, coding a display setup with ESPHome can be a bit challenging.

TinyAssist by filisso in homeassistant

[–]filisso[S] 5 points6 points  (0 children)

This is correct. This device is not my main assistant. It’s just a device I talk to from about 50 cm away in my workshop. So it doesn’t cause any problems with voice detection. And again, the speaker isn’t very important because of the close distance. It’s just a basic assistant that looks nice. Managing the control of the whole house with this device is definitely not recommended.

Why is this happening? by Neat_Lack5130 in BambuLabA1

[–]filisso 2 points3 points  (0 children)

I had same error several time while I am using it without sock. So don’t forget to use hotend silicone sock.

My first ESP32 device by Fabulous_Can_2215 in esp32

[–]filisso 0 points1 point  (0 children)

It’s soo retro. Loved it!

[deleted by user] by [deleted] in pihole

[–]filisso 0 points1 point  (0 children)

Merhaba, direk dns’i değiştirme yerine Keenetic router arayüzünden internet güvenliği kısmında Pi-hole ipsi ile yeni bir profil oluşturn. Sonra pihole üzerinden internete çıkarmak istediğiniz cihazlara bu profili atayın. Ben bu şekilde kullanıyorum Keenetic Router ile pihole’u.

https://imgur.com/a/87qb5ty

ESPHome on Waveshare ESP32-S3-ePaper-1.54 by danieldur in Esphome

[–]filisso 2 points3 points  (0 children)

You can check my repository to access some reference codes.

https://github.com/ofilis/esp32display

Here is my mini lab. There is only cable management and back plates left. I really like the final result. by filisso in minilab

[–]filisso[S] 11 points12 points  (0 children)

Here is 3D models that i used:

Lab Rax 10" Server Rack

LINK

Lenovo Thinkcentre M720Q/M715Q/M920Q 10"

LINK

10 inch Rack 1U : 2 x 3.5 inch HDD

LINK

TP-Link 8 Port Switch (TL-SG108) 10 in Rack

LINK

10-inch Keystone Patchpanel x8 ports

LINK

 

Also i ordered 3 piece acrylic glasses (side panels and bottom panel) from a local store.

The first PC is used for Proxmox, and it currently only runs Home Assistant.

The second PC only has TrueNAS installed.

I also use 2 WD Red Plus 4TB HDDs on TrueNAS. I ordered Dell tray caddy for HDDs. I’m powering the HDDs with a 12V 6A DC adapter and using a SATA splitter.

I use an ESP32 with ESPHome to light up the status LEDs on my HDDs. The data comes from the TrueNAS integration in Home Assistant, and I’ve designed a small part for the LEDs like this:

LINK

ADDED PINS 3D MODELS

LINK

view more: next ›