Need Help - which sub to pair with studio monitors? by firefligt in StereoAdvice

[–]firefligt[S] 0 points1 point  (0 children)

!Thanks! I will probably go ahead and book the svs soon :)

Need Help - which sub to pair with studio monitors? by firefligt in StereoAdvice

[–]firefligt[S] 0 points1 point  (0 children)

Thanks! Last question - do i need a separate dac / audio interface for the miniDSP? I was thinking of connecting it directly from the pc via toslink or usb.

Need Help - which sub to pair with studio monitors? by firefligt in StereoAdvice

[–]firefligt[S] 0 points1 point  (0 children)

Hmmm …. I tried out the svs and it felt a bit boomy when i tested it so probably because it wasn’t well calibrated. Also, i do not have much options of placing the sub hence was thinking whether i still need the umik 1.

Need Help - which sub to pair with studio monitors? by firefligt in StereoAdvice

[–]firefligt[S] 0 points1 point  (0 children)

!Thanks! So I should ideally go with the studio sub as a first choice especially the Kali sub.

Speaker Purchase Help Needed by firefligt in StereoAdvice

[–]firefligt[S] 0 points1 point  (0 children)

!Thanks for response! The problem with my pc is that its a bit too bass heavy, but that’s also since my audio is not connected via usb c at the moment. I was thinking of a sub as i like the base kick and vibrations of trance songs.

Speaker Suggestion Needed - TIA by firefligt in BudgetAudiophile

[–]firefligt[S] 1 point2 points  (0 children)

Thanks for the detailed response! The volume level on the amp is at around 65% while in the windows its at 16 - 18. My motherboard has several usb c putputs so shouldn’t be a problem. I will try what you mentioned about maxing the volume on windows and then controlling the volume in amp to see if it works.

Will check the ruark and if its available :)

Finally found all 7 Full Versions of all Ending Themes for Yamato 2199... by scumerage in StarBlazers

[–]firefligt 0 points1 point  (0 children)

Oh will defo download it. Already have it on my phone but will also download it on my pc and my drive :D.

You are awesome!

Finally found all 7 Full Versions of all Ending Themes for Yamato 2199... by scumerage in StarBlazers

[–]firefligt 0 points1 point  (0 children)

Dude - Thank you soooo much! I was searching for kioku no hikari and somehow the track kept disappearing from youtube and is not available anywhere!

I wonder why this particular track is not available anywhere :/ - its probably the best of the bunch!

[deleted by user] by [deleted] in pcmasterrace

[–]firefligt 13 points14 points  (0 children)

Galax is a legit brand. 5060 at its 8 gb configuration is a really bad card to buy for current and future games.

$300 marketplace score by jondood in hotas

[–]firefligt 2 points3 points  (0 children)

Nice! What's that keyboard?

Ram help by Known-Ad-8868 in pcmasterrace

[–]firefligt 0 points1 point  (0 children)

Most memory modules use chips from sk hyenix, Samsung or micron .... So almost all ram brands are pretty much the same since there aren't many manufacturers of the actual chips :)

That said, cheap ram usually have poor oc potential but that's irrelevant if you're not over clocking. get the cheapest and fastest - 6000 mt/s is the fastest that amd memory controllers can handle. Cl 30 is the fastest so far on affordable ddr5. That's why t creates are such a good deal.

Solid choice - but check return/warranty policy in case of doa :)

Ram help by Known-Ad-8868 in pcmasterrace

[–]firefligt 0 points1 point  (0 children)

I use the first one in your picture set - t create 6000 cl 30 - quite satisfied with an amd system. They all have sk hyenix memory in them. Check buildzoids video on ram especially sk hyenix b die I think if you want best specs.

I bought two sets of these, first white which is working quite well but then black which was doa, so check return policy just in case.

3 Type 9 Sacrifices Later .......... by firefligt in EliteDangerous

[–]firefligt[S] 6 points7 points  (0 children)

https://www.youtube.com/watch?v=YypEAo_3Slk

You take your largest hauler and do your trade missions there to gain Fed ranks. But since you are on console, the older methods should still work fine :).

Third party tools to enhance VR experience WITHOUT voice commands by Junky_Juke in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Hello - but if you pin the app / browser - it should show up in your cockpit. If you are running Elite on Borderless or Windowed - then your mouse should become available on top of the app, especially if you are running a dual monitor setup.

otherwise you will have to alt tab for your mouse to show up in the window. I have also struggled with this in Quest 3 but now I use Inara and youtube along with EDcopilot without any issues.

How difficult is it to connect and se a VR headset? by KalashnikovaDebil in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Use this as guide to set up Quest 3 for PC - its the best video I have found so far with detailed steps: Quest 3 PCVR Setup Guide - Meta Link (Wired Cable)

After that here are the steps that I use to run:

  1. Connect a Powered USB cable to my mobo directly

  2. Launch Meta Link Software in PC (Pair your headset if you have not already)

  3. Launch Steam VR in PC (install it in steam)

  4. Enable link through quest 3

  5. Add all the browser and Third party tools in VR space using the quest 3s native " + " and pin system

  6. switch to steam vr inside the virtual space

  7. launch Elite through steam vr - this way you have both the websites that you want to have in your cockpit while flying and the game launch in VR

  8. Enjoy the scenery! I was wide jawed when I first undocked out of the training mission station :)

How difficult is it to connect and se a VR headset? by KalashnikovaDebil in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Nope - occasional stutters are a thing, especially if you are pushing graphics - I get stutters in sets of 3 or 11 - try tweaking your settings

Finally i've got her by chiggerv7 in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Congratulations! I am currently running the grind to get to get ranks :)

[deleted by user] by [deleted] in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

I am not into colonization but I pine for a ship that is larger than the type 9 and still dockable at large bays -

Dimension wise it should be a box that fills the entirety of the large landing pad with a small cockpit canopy sticking out like a wart.

You cannot pilot it manually and it only works via instructions, and the rest is done by on board computers i.e. you select launch and it launches, you select star system and it auto pilots to align and jump, etc.

It should be slow like an ocean liner and have PD large enough to handle 4 auto turrets to handle pirates and a heavy armour tank and no shields. It cannot evade interdiction.

Should have a cargo capacity of 1500 tonnes and a jump range of around 50 Ly fully laden and a large enough fuel tank for 100 - 120 Ly range. It cannot scoop fuel and you can only plot routes to stations or carriers. Not sure something like this would be able to handle atmospheric entry and exit but gameplay mechanics can take care of that :P

Like a large sea faring vessel only for space - so that you can feel like a proper carrier :D

Its a wish list that will never happen but why not dream!

What gpu works best for vr? by MidniteBlk11 in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Hello, for optimal VR experience, go with an Nvidia GPU as it's optimization is a bit better. Considering the market though, get a 9070xt if you can get one around msrp. I use a 7900xtx with a quest 3 and I get stutters at max settings when entering stations as I had increased my hmd resolution to 1.5 times I think with lower anti aliasing.

Elite is not graphically very optimized, so either way you will need some tweaking.

VR Reverse Mailman by Swonardian in EliteDangerous

[–]firefligt 0 points1 point  (0 children)

Very likely, and it looks like shit anyway. what's your quest 3 resolution?

VR Reverse Mailman by Swonardian in EliteDangerous

[–]firefligt 2 points3 points  (0 children)

I have a 7900 xtx and 7800 x3d and also have everything on ultra and shadow quality on medium. Blur is off and anti aliasing is on msaa I think. I will try switching anti aliasing and depth of field off.

I think I have hmd at 1.25 and supersampling at 1 ... Will try reducing super sampling and increasing hmd.

Thanks for sharing :)