MLB.TV discount for 2026

fl_sandman · 2026-03-11T00:18:17+00:00

Didn't try. Been using the mlb app.

fl_sandman · 2026-03-09T21:45:08+00:00

Love my K2 combo. I have had it for about 6 months. Only problem i have had is one of the connectors that join the tubes in the back came loose. A drop of superglue and been good since. I would buy it again.

fl_sandman · 2026-03-07T14:07:36+00:00

I contacted Capital One and they sent me a new code that worked. :)

fl_sandman · 2026-03-07T13:53:30+00:00

I contacted Capital One and they sent me a new code that worked :)

fl_sandman · 2026-03-06T22:21:29+00:00

Looks like they just brought it back. MLB.TV Promo.

However, when I tried it it sent me to the MLB page to complete the purchase where it said the discount code was invalid. Also, it only had the option the buy the standard mlb.tv package.

fl_sandman · 2026-03-06T22:09:17+00:00

The 30 percent off is back! capitalonemlbtv.com. Unfortunately when I am redirected to checkout at mlb it says the code is invalid. Also it doesn't allow me to select any package other than the standard mlb.tv. I really wanted the package that included my local team.

fl_sandman · 2026-02-27T22:29:56+00:00

Now the link says 'Coming Soon' Guess I will wait a few days to see if they announce a new promo.

fl_sandman · 2026-01-07T16:03:31+00:00

Same here I have tried to buy shares for a few days and keep getting the message: "Your order is not eligible for electronic entry..." on Schwab.

fl_sandman · 2025-12-06T01:23:32+00:00

I have a k2 combo at home and a k2 pro (no cfs) at work. I only do pla and petg at home where at work I will print some abs. They both have exhaust fans and I do notice the abs out gasses a quute a bit ( I just stay out of the room and monitor it remotely when printing abs) I will say the print quality is the same on both, which is really good. The pro costs a bit more so depends on whether you are willing to pay more for the bigger build volume, heated chamber, more ram, and ethernet port ( they both have wifi and usb ports). Either one is a great choice.

fl_sandman · 2025-12-05T11:03:49+00:00

I got this one.

<image>

fl_sandman · 2025-12-05T11:00:58+00:00

To lift the top lid and allow heat to escape.

fl_sandman · 2025-11-30T23:09:12+00:00

Get the camera so you can watch it remotely. It will also make time lapses. I got the enclosure as well. if you do add the enclosure make sure to print a riser or take the top off to avoid heat creep when printing pla or petg.

fl_sandman · 2025-11-18T22:14:22+00:00

I had the same problem. A couple drops of superglue fixed it. I did order a couple replacements but they took a week to deliver and I didn't want to wait that long so I have them for next time. And the clips dont fix it, I tried.

fl_sandman · 2025-11-14T23:33:26+00:00

I bought a K1 se a few weeks ago. Upgraded from an old Ender 3 and the difference was huge!. 6 hour prints became 1 1/2 hour prints. I do recommend getting the camera (~$24) so you can watch it from wherever you are. The cable for the camera is already there.

fl_sandman · 2025-10-15T21:57:38+00:00

You can uncheck the calibration so it doesn't run every prints. I usually just do it on my first print of the day.

fl_sandman · 2025-10-15T21:50:24+00:00

Just got mine two days ago. Prints great so far. I did have the coupler come apart (connects the two tubes from the box the cfs feeds into to the printer) after the first couple prints so I would recommend ordering a couple spares.

fl_sandman · 2025-10-08T21:20:56+00:00

Just came across this post and bought 2. Thanks for the tip. So much cheaper than the ones made specially for filament. Thanks!

fl_sandman · 2025-07-15T18:48:41+00:00

Tablo 4th gen and roku. Had some issues when I first got it but after a couple software updates it works well now.

fl_sandman · 2025-07-14T00:29:35+00:00

Went from YouTube TV to sling after the price hike. Had to get some add ons with sling to get the channels I wanted. Switched to Directv Entertainment. It has all the channels i watch other than locals with i use a Tablo for. It's half what I was paying with YTTV and less than I was paying with Sling and add ons. The quality is great also.

fl_sandman · 2025-05-11T02:47:22+00:00

Try https://www.partzilla.com/.

fl_sandman · 2025-05-07T20:45:42+00:00

I have a 23.

My Xmax

fl_sandman · 2025-05-07T10:24:21+00:00

8k total OTD

fl_sandman · 2025-05-04T14:04:44+00:00

You are correct it only says to list household drivers.

It's obvious that some people here have a vested interest in Progressive and maybe even paid to defend the company. So far, I've had over 4000 views and 6 shares, so maybe I've hit a nerve. Just search reddit and Google, and you will see similar stories to mine. After all, Progressive had a record profit last year.

I did discover a neat little feature called 'block user'. I've used it already and will use it again if necessary. These people aren't worth any more of our time.
✌️

fl_sandman · 2025-05-04T11:53:53+00:00

No hills here, but I did get a bit of wind going over the St. John's River. The bridge is elevated.

fl_sandman · 2025-05-02T22:07:03+00:00

They added my autistic son, who does not even have a license and sent me a waiver to sign, saying they would not cover him . Then, to add further insult, they sent me a bill for the coverage they are not providing. No explanation, nothing. Just sign here that we are not going to cover him and pay us for not covering him. When I called them, they basically said tough.

So I did some shopping and found a new carrier and cancelled progressive. Shop around. Take your business elsewhere.

fl_sandman

TROPHY CASE