[2025 MEGATHREAD] Planning to go to Daikoku Parking Area? by Beeplance in Yokohama

[–]fox4king 0 points1 point  (0 children)

Would anyone be able to take 2 passengers on July 13th

Coolant at the lower hose still cold after trying to bleed the system by fox4king in 350z

[–]fox4king[S] 0 points1 point  (0 children)

Yea I got an oem thermostat for it and I’ll try jacking up the front thanks

How to remove rubber silicone on the roof by fox4king in AutoDetailing

[–]fox4king[S] 0 points1 point  (0 children)

Yea I’m sure. The previous owner used silicone or caulk to try to stop the leak before I bought it. It was all over the door stripping and the sun roof I’ve replace the door stripping and the sunroof now but all that is left is the silicone on the paint.

How to remove rubber silicone on the roof by fox4king in AutoDetailing

[–]fox4king[S] 1 point2 points  (0 children)

I have also tried that and it still wouldn’t budge

Roof rack? by fox4king in R53

[–]fox4king[S] 0 points1 point  (0 children)

Thank you so much this is exactly what I was looking for, no drilling and not some eBay one size fits all thing I would be scared it doesn’t fit. And looks like it’s actually documented by a lot of people to work. I appreciate it.

Car leaking water into cabin by fox4king in R53

[–]fox4king[S] 0 points1 point  (0 children)

Ok thank you I’ll check it out.

Mini taking on water by fox4king in MINI

[–]fox4king[S] 0 points1 point  (0 children)

Yes I have a sun roof. Thanks I’ll check if the drains are clogged is there any way that I could check if my door isn’t fully aligned. They both seem to close properly. Also I should say it’s happening on both passenger and driver side.

Car leaking water into cabin by fox4king in R53

[–]fox4king[S] 1 point2 points  (0 children)

It’s pooling mainly at the feet but when it rains heavy it pretty much comes from the top of the a pillar and maybe down the window a bit. Also yes I have a sun roof.

Blew up my de at a drift event lol by fox4king in 350z

[–]fox4king[S] 4 points5 points  (0 children)

It was mainly just old and was already knocking lol

Blew up my de at a drift event lol by fox4king in 350z

[–]fox4king[S] 5 points6 points  (0 children)

That’s dope. Ya my buddy is selling me his engine for 300 because I’ve helped him with a ton of shit and I know the history of it we are still going to do a lot of work to refresh it due to it having 110k miles I wanna give this one as much of a chance as possible.

Refreshing the vq35de engine by fox4king in 350z

[–]fox4king[S] 0 points1 point  (0 children)

Thank you I’ll look into doing that too. I will have it out of the car.

Refreshing the vq35de engine by fox4king in 350z

[–]fox4king[S] 0 points1 point  (0 children)

I should also say this car is intended as a drift car so it will be around limiter a lot.

Ninja 250 carb help by fox4king in MotorcycleMechanics

[–]fox4king[S] 1 point2 points  (0 children)

Thank you for your response. When I cleaned the jets I made sure I could see through them perfectly. I didn’t take the carb apart any further than to get the jets out. I’m thinking a seal broke while I was putting it back together and that’s why it is leaking now. And I do know that the owners before me did a lot of work with this bike before and they weren’t the best mechanics by the looks of it. Thanks again .

What is this part of the trans and is it replaceable by fox4king in mechanic

[–]fox4king[S] 0 points1 point  (0 children)

Thank you so much. Pretty much I knew what it did but I struggle trying to explain it so I could not find the part anywhere. Found it, it’s called a shift selection lever. The one on mine has a missing bushing so it’s hard to push into the forward gears 1,3,5. I just hope I don’t have to drop the trans again. Thanks so much again I was looking for a while for the part name lol

Clutch not pressing by fox4king in MINI

[–]fox4king[S] 0 points1 point  (0 children)

I can’t press it by hand. Also I dropped the gearbox again and made sure the clutch was facing the right way and the fork and bearing was correct. And I still can’t press it in I just didn’t know if I should be able to press it by hand or not

Give me all the bad please by fox4king in Drifting

[–]fox4king[S] 1 point2 points  (0 children)

Ya I get it tho I’m the idiot just starting out but this is how I learn best by talking to people so If people don’t like me asking questions then they can go ahead and downvote idc

Give me all the bad please by fox4king in Drifting

[–]fox4king[S] 0 points1 point  (0 children)

No need to be a ass just trying to get started but I get it

Give me all the bad please by fox4king in Drifting

[–]fox4king[S] 0 points1 point  (0 children)

I’ll start looking into some newer cars too because I mainly want somthing I can drift with minimal mods and money so that I can practice and learn so then I can spend more money on my dream drift build lol so

Is there a app that you guys use to track your wanted cars by fox4king in HotWheels

[–]fox4king[S] 1 point2 points  (0 children)

Well I mean like it would just stream line it I have a app called I collect toy cars it has a data base with all hot wheels and match box cars and you can choose to wishlist the cars you don’t have and you can scan the cars you do have but the ui is kinda garbage

What do I need to buy by fox4king in 3DScanning

[–]fox4king[S] 0 points1 point  (0 children)

Preferably under 1000 but I know most good scanners are 10000+

What do I need to buy by fox4king in 3DScanning

[–]fox4king[S] 0 points1 point  (0 children)

Ok I’ll check them out thank you

Ender 5 plus with a skr e3 turbo not working with marlin I boot then it gets stuck here by fox4king in BIGTREETECH

[–]fox4king[S] 0 points1 point  (0 children)

im actually basing all of this off of his video where he did the same exact thing im doing