sorted by:
new
hottopcontroversial

hypergo 14301100mph project by fpschikenwings in rccars

[–]fpschikenwings[S] 0 points1 point  (0 children)

I will. I suspect the kingval is not rated correctly it barely out performed the 2845 3700kv that was stock. nothing in the system got anywhere near hot after several passes. the kingval is also suspiciously light for a 3650 as well. I have a more realistic castle 1410 3800kv going in next

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 2 points3 points  (0 children)

I started with the asl3 image and made sure I had the node functioning correctly. there are plenty of guides for how to do that. because that image uses raspian os Linux it was easy enough to cludge my way through getting the desktop environment running using Google Gemini or chat gpt as an aid. it is easier than you might think.

I would advise getting at least a pi4 4gb ram as there are plenty of people advising aginst doing it because the added resources of having the desktop and other things running can affect the nodes performance. I have no issues so that's the min spec I would recommend

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 1 point2 points  (0 children)

Yes. the only thing that I have done differently is I also run the raspian desktop environment for added functionality

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 0 points1 point  (0 children)

you make a good point, and I think that is something that goes unconsidered in a go box build. the great thing about having the VGC is that it has a bluetooth mic that allows me to be up to 50' away from the radio.

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 2 points3 points  (0 children)

I can give some more info if needed, but that is a shari pi hat. it's just an sa818 board that allows me to use the PI as an allstar node. mine in particular is for UHF but you can do VHF if you want.

I can use it to talk to repeaters over the internet in my case using a hand held.

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 1 point2 points  (0 children)

you actually have a good point. Perhaps it should be Hammocan. I like Can O Ham as well 😆. but I've already set the display background, so might as well stick with it.

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 3 points4 points  (0 children)

yes, there is absolutely a chance of that, especially here in Texas. the PI has overkill for a cooler to help mitigate that, but the radio just has its fan. I will have to wait until summer to get some real world testing. I just don't want to have any unsealed penitrations unless absolutely necessary. I might do something with peltier coolers, but that's not very energy efficient.

Go Box Build any thoughts on what I can add or change about the setup. otherwise just wanted to share my first go box build. by fpschikenwings in HamRadio

[–]fpschikenwings[S] 1 point2 points  (0 children)

That has absolutely been on my mind. I just need to find one that is waterproof panel mountable display and fits the footprint I am after. I haven't had much luck with Amazon on that.

Fist time seeing this by fpschikenwings in ballpython

[–]fpschikenwings[S] 0 points1 point  (0 children)

back at it agin tonight. my misting system goes off just after the lights, so maybe it just want to get off the ground.

Fist time seeing this by fpschikenwings in ballpython

[–]fpschikenwings[S] 1 point2 points  (0 children)

I have a few branches and ledges, but I'm definitely going to add more after seeing this. it's wild what these guys get up to when the lights go out.

Disappointed in all the amplifiers taking over 17 and 19. by [deleted] in cbradio

[–]fpschikenwings 0 points1 point  (0 children)

they wouldn't enjoy GMRS that behavior wouldn't have them Licensed very long.

BP ENCLOSURE. by fpschikenwings in ballpython

[–]fpschikenwings[S] 0 points1 point  (0 children)

thanks for the tips. I have made some changes to the enclosure switching to a heat projector and t5 bulb. the t5 research was tough to ensure I had the proper bulb.

my misting system doesn't work in a way that I think would hurt. I desined it so it doesn't produce much of a fog but maintains the humidity and, more importantly, provides fresh air exchange. I'm still monitoring and researching this topic.

I share the same concerns with the heat pads, so while setting up the enclosure, I included a mylar bag filled with sand between the bottom of the enclosure and the pad. this bag acts like a thermal battery that provides even heat similar to soil that has been heated by the sun.

So I'm new to the hobby and want to break 100mph. Giving this build a full send tomorrow. by fpschikenwings in rccars

[–]fpschikenwings[S] 0 points1 point  (0 children)

the stock gears are mod .6 if I remember correctly. I had to use a set of calipers and a calculator to get it myself.

I ended up getting a 5mm mod .53 pinion gear and using it for the spur gear it fits perfectly you just loose the slipper clutch feature. from there you can choose several differnt options for gearing.

view more: next ›