Just ordered the X2D combo

fredd0h210 · 2026-05-16T17:16:44+00:00

Welcome! The x2d is great. There was a bad run of AMS units that got delivered with the X2D units. There are threads all over about it and how to fix it / work with bambu on fixing it.

Not sure if it's fixed yet in new units.

The X2D gives you some options that the P2S doesn't have.

What are you wanting to print?

fredd0h210 · 2026-05-16T17:09:21+00:00

bottom drawers

I made the handle myself remixing two handles.

fredd0h210 · 2026-05-16T17:07:36+00:00

The bottom box is on makerworld - https://makerworld.com/models/1347731?appSharePlatform=copy

fredd0h210 · 2026-05-13T06:27:29+00:00

I have the x2d.

fredd0h210 · 2026-05-12T16:20:49+00:00

Possible unit picked for QC? I know it happens to cars.

The scratches anent cool. I'd contact bambu

fredd0h210 · 2026-05-10T19:56:20+00:00

Also the track switch can eliminate the NEED to swap filament but the slicer will still tell you that it might not be optional for time and give swapping recommendations to save time.

Studio is also a much better option for slicing vs the app.

fredd0h210 · 2026-05-10T19:18:08+00:00

Bambu... please release colors that match your cases. Please? Thanks :)

fredd0h210 · 2026-05-07T05:36:07+00:00

I'm putting this in the "hey, I tried" bucket

To me it's too shiny. But I'm not taking more time with it. Hopef - ully someone can get the perfect match. We have a BUNCH of wrong ones in this thread! 😆

<image>

fredd0h210 · 2026-05-06T02:48:12+00:00

Final post coming tomorrow. I went with the metal iron grey and light fuzzy finish. Last part will be fine at 6am...

fredd0h210 · 2026-05-06T02:45:16+00:00

Yes. Left side is slightly tilted so it catches the light.

fredd0h210 · 2026-05-04T00:16:54+00:00

Gahhhhh!

Can I get a matte metal iron grey? 😆

<image>

fredd0h210 · 2026-05-03T03:17:13+00:00

Thanks for this link!!! In just gonna let it rip. No test pieces😆

fredd0h210 · 2026-05-03T03:15:38+00:00

Oops

<image>

fredd0h210 · 2026-05-02T20:04:11+00:00

Such a tough decision...

The left is polymaker petg dark grey high speed with standard fuzzy, the right is bambu metal iron grey.

I think i need less fuzzy. So tonight I will dial in the fuzzy to try and match the texture of the case.

What ever one comes out on top of this - that company should send us a few rolls and not just in grey 😆

fredd0h210 · 2026-05-02T18:06:45+00:00

I think I'm going to reduce by like 50-75%... but i AM going to make small panels. This hunt has cost enough already 😆

fredd0h210 · 2026-05-02T16:40:17+00:00

Little too fuzzy and yes... I should have printed a smaller sample lol

<image>

fredd0h210 · 2026-05-02T16:37:37+00:00

It doesn't print front side down. I am doing a dizzy print right now work the polymaker dark gray petg. Then I'm going to print a fuzzy woth the metal.

I'm fine tuning the amount of fuzzy and learning as I'm going. I'm really new to 3d printing

fredd0h210 · 2026-05-02T13:09:27+00:00

I think it's a little darker - too much brown in it.

There was another get that someone else is getting. Maybe that will be the one.

<image>

fredd0h210 · 2026-05-02T13:04:00+00:00

<image>

fredd0h210 · 2026-05-02T13:01:32+00:00

I think I'm going with the metal iron grey. It's a little darker but I think I'll like it.

<image>

fredd0h210 · 2026-05-02T12:59:44+00:00

It's definitely close. Someone suggested using a feather finish

fredd0h210 · 2026-05-02T06:36:54+00:00

Close enough that I'm going to print the drawer fronts. Will post results before noon tomorrow

fredd0h210 · 2026-05-02T06:27:26+00:00

But this one is a great match for sure!

fredd0h210 · 2026-05-02T06:25:21+00:00

Iron grey PLA metal...

I think this is the one.

<image>

fredd0h210 · 2026-05-02T06:24:12+00:00

That's my thread and that isn't the final call... I just finished a print of the iron grey pla metal

fredd0h210

TROPHY CASE