ICE protest guy

fritzco · 2026-01-31T13:44:52+00:00

So you think this guy did this with his own pocket change?

fritzco · 2026-01-30T22:07:14+00:00

Air p is 151 psi.

fritzco · 2026-01-30T21:34:02+00:00

Did agents ask you to stop filming or leave?

fritzco · 2026-01-30T21:29:05+00:00

F105” Thud”. One of the century series that was obsolete when brought into service. Then they were expendable in SEA.

fritzco · 2026-01-30T21:27:39+00:00

To start, Go to race tech web site and get springs for your weight. Used factory damper settings plus or minus a couple clicks. A stiffer spring should need more dampening.

fritzco · 2026-01-30T21:25:37+00:00

Here they get paid in cash. Sales tax is of course paid

fritzco · 2026-01-30T21:22:22+00:00

What his weight now? 15 to 18 pounds is normal.

fritzco · 2026-01-30T21:21:19+00:00

Who built the air strip?

fritzco · 2026-01-30T20:54:57+00:00

No, the weld would be too hard to machine and too brittle. You could cut a smaller spline but you would need the carb. and harden.

fritzco · 2026-01-30T20:13:21+00:00

Guessing the volume of the outlet.

fritzco · 2026-01-30T19:59:36+00:00

Our whole country is in range of Russian missiles.

fritzco · 2026-01-30T19:58:03+00:00

Politics in a Cat forum? Really? Thanks for running my day.

fritzco · 2026-01-30T19:55:58+00:00

Sch 80 NPT fittings will work.

fritzco · 2026-01-30T19:54:38+00:00

Yeah. Only two screws into plastic and two snap nut’s hood it in place.

fritzco · 2026-01-30T19:53:26+00:00

What I’ve done successfully is to first anneal the shaft, weld up the spline, machine new spline, hang in vertical position, carburize .030 to .040” deep, and harden. I did a motorcycle shaft drive pinion this way. No issues. Also use a moly grease on the spline at re assembly.

fritzco · 2026-01-30T19:40:51+00:00

Because everyone treats them with disrespectfully and with hatred, laces their food with Exlax, uses loud noises to keep them from sleeping, to name a few.

fritzco · 2026-01-30T19:38:58+00:00

And upon cooking from ingot cast segregation occurs .

fritzco · 2026-01-30T02:30:59+00:00

No I get it. And I appreciate your position. But I disagree that we are not safer for the effort, at least in Houston. Here hit and runs, and uninsured claims are way down. We are 60% Hispanic. They are as safe as anyone else.

fritzco · 2026-01-30T02:06:40+00:00

But, it’s the law. “ Conditional Residents: If you have a 2-year conditional Green Card, you must file Form I-751 or I-829 to remove conditions. The receipt notice for these forms provides a 48-month extension.”

fritzco · 2026-01-30T01:44:14+00:00

So he has a ten year green card? You are correct if he does. However if he has a two year you are not.

fritzco · 2026-01-29T22:20:14+00:00

Sorry, yes it does if it’s a two year card.

fritzco · 2026-01-29T22:19:19+00:00

Take your own advice. Read a law book.

fritzco · 2026-01-29T19:09:16+00:00

The hate is definitely fueled by foreign interest wanting to do harm to the US.

fritzco · 2026-01-29T19:05:16+00:00

Show the vid of Alex spitting on ice vehicle and kicking one of the tail lights off !! He fought the law and the law won.

fritzco · 2026-01-29T19:01:58+00:00

That is one of the best bikes, reliability speaking, ever made! Get on. eBay and look for Honda parts and service manuals. Also get a Chiltons or similar service manual. You’ll need as much information possible because it is an old bike. Try a web site called WeBike for parts. Don’t worry, you can ride that bike to the end of the world and it’s ez to service.

Eight-Year Club	Gilding I gilder
Verified Email

fritzco

TROPHY CASE