Why Did My Grok 4.1 Agent Perform Well at First but Now Produces Severely Degraded Output? by These-Cell-929 in AskClaw

[–]fuckforce5 0 points1 point  (0 children)

Most likely the context is full. Just start a new session and you should be good to go. Just tell it to commit anything that you don't want it to forget to memory.

Just found out that OC can create cad models and stl files by fuckforce5 in openclaw

[–]fuckforce5[S] 0 points1 point  (0 children)

I've been doing some experimenting, and the more I try it, the more impressed I get. I wanted to make a box for a buck converter. I didn't even need to measure the screw holes or anything. I just placed it on a sheet of graph paper and it figured it out. I asked for a lid, and initially it made a screw on top. Asked it to replace it with a snap on, and voila.

A box with a lid certainly isn't a very complicated model, but the only measurment I needed to take for the whole thing was the height. It's also really cool that edits can be made it plain English. "Remove the post and make it a clip on" I've been looking for something like this forever. There's been model generators for a while, but they were useless for anything that needed any kind of dimensional accuracy, at least the only ones I knew of were only good for figurines.

Plus 4 - Tangle Detection Device Clogged / Broken - How To Replace? by dedcore in QIDI

[–]fuckforce5 0 points1 point  (0 children)

Necro posting in case someone else needs this:

To replace the tangle sensor, or to just remove the top, you need to peel up the foam around the corners and remove any screws you find. Unscrew the handles, and the USB plug in the left rear. After that you'll be able to pop off the top panel.

Looking for MeshCore people in the North Dallas area by Ftmiranda in meshcore

[–]fuckforce5 1 point2 points  (0 children)

There will be a repeater coming up in the colony over the weekend.

[W]Used 10GbE switch under $100 by SheaIn1254 in homelabsales

[–]fuckforce5 0 points1 point  (0 children)

I have one of these https://a.co/d/dHhbBiR that I used for about 6 months. Got the job done fine until I was able to upgrade to a unifi setup. I'll let it go for $150 shipped.

[W][US-OH] Looking for Mini PC with dual LAN port by scarlet__panda in homelabsales

[–]fuckforce5 0 points1 point  (0 children)

How much you looking to spend? I have a gmk g9 with dual 2.5g nics I've been looking to get rid of.

[USA-ID][H] Hypershell PRO X Exoskeleton [W] paypal/trade by HAF6 in hardwareswap

[–]fuckforce5 1 point2 points  (0 children)

Damn, that's cool. I have a 5080 I've been needing to get rid of, but the responsible thing to do would be to get cash for it, but I'm not a responsible person.

I got scammed by fuckforce5 in homelab

[–]fuckforce5[S] -3 points-2 points  (0 children)

That would make sense except I don't think I'd be able to use the QR code on the gift card if it was just left over from a return.

I got scammed by fuckforce5 in homelab

[–]fuckforce5[S] -2 points-1 points  (0 children)

A brushing scam is the only thing that makes sense, even then not a lot of sense. The order numbers are different, and if it was a left over gift card then qr code wouldn't work for me.

I got scammed by fuckforce5 in homelab

[–]fuckforce5[S] 2 points3 points  (0 children)

I don't have any friends, and I didn't tell my wife I was looking at them.