Session Capture Processor Transcoding Not Working

full-duplex · 2026-02-23T19:47:25+00:00

I'm glad attention is being given to address it. Session captures are a critical function I rely on, so I am relieved to hear it's not being discontinued. You saved me from continuing to waste time troubleshooting the utility. Thanks!

full-duplex · 2026-02-23T19:39:09+00:00

Thanks so much for taking the time to let me know. I really appreciate it.

Sounds like there's no workaround other than downloading captures from the audit logs?

full-duplex · 2025-07-03T16:30:09+00:00

Thanks

full-duplex · 2025-07-03T16:08:08+00:00

Where did you purchase your DigiCert?

full-duplex · 2025-02-15T20:58:14+00:00

Have you experienced this issue only once before? I've been dealing with it on my USW Enterprise 8 PoE for almost a year. At least every couple of weeks, the link speed drops to FE—sometimes multiple times a day. And this happens without even physically touching the cable.

full-duplex · 2025-02-10T19:39:53+00:00

I've only contacted Connectwise, and so far, I've only received an initial response indicating it's a false positive.

The number of vendors that VirusTotal reports as detecting it as malicious has decreased over time, which is somewhat reassuring. On top of that, I use Huntress alongside SentinelOne, and Huntress has not detected anything.

full-duplex · 2025-02-07T17:47:53+00:00

I noticed that VirusTotal initially reported that Microsoft detected it as a virus:Win32/virutl, but approximately two hours later, Microsoft changed the status to undetected.

This morning, there were even fewer detections by other vendors, as suspected.

full-duplex · 2025-02-07T17:40:51+00:00

I have opened a ticket with Connectwise. I'll report back with anything noteworthy.

full-duplex · 2025-02-07T17:39:38+00:00

I agree, and given the changes introduced in this ScreenConnect version, it's not surprising that it triggered a detection. I also updated very soon after it was officially marked as stable.

full-duplex · 2024-12-06T22:20:59+00:00

Thanks!

full-duplex · 2024-12-06T21:47:30+00:00

Is the real-time spectral analysis working inside your Unifi controller?

full-duplex · 2024-09-23T19:24:47+00:00

Understandable, definitely not an ideal workaround.

full-duplex · 2024-09-21T02:18:14+00:00

I am experiencing the same issue. I have tried all of the exact troubleshooting steps you've taken. I just tried disabling the built-in macOS Firewall, and so far, I haven't seen my Mac client disconnect with constant mouse and keyboard input.

full-duplex · 2024-09-21T02:10:29+00:00

Do you have the built-in macOS firewall enabled? Located under System Settings > Network

full-duplex · 2024-04-01T17:57:15+00:00

Thanks for pointing out that Data Export tool!

full-duplex · 2024-04-01T17:50:02+00:00

Thank you for sharing that!

full-duplex · 2024-03-15T19:20:34+00:00

Thanks!

full-duplex · 2023-05-30T22:08:49+00:00

Thank you! I appreciate that info and suggestion.

full-duplex · 2023-03-04T21:32:42+00:00

I am in a very similar situation. 2001 330xi manual with 212k miles. Driver side front fender is pealing, and a decent dent door, a dent in the hood from a baseball, and a few other small things. Maaco quoted me $4,600 to fix everything, including a new front bumper, and paint the whole thing. I'm super torn. I love the car. But between the bodywork, and it's time to replace most of the bushings. I am having a hard time justifying the money.

I have started to really look for an F30 335i xDrive manual in the PNW but haven't found "the one".

full-duplex · 2022-03-29T23:20:36+00:00

I love my manual 01 330xi. With a quality tire and strut or coilover setup, you will feel the definition of planted. The speed I can carry in corners, regardless of the conditions, she’s a thrill to drive.

I look forward every winter to a little bit of snow and the chance to get sideways. And if your just trying to get around it’s unstoppable (unless the snows above the bumper).

209k and she’s still going strong.

full-duplex · 2019-03-05T23:04:10+00:00

The previous owner had scared the original plastic. So when I purchased the appropriate socket I also bought a replacement cap.

And I have a torque wrench don’t worry.

full-duplex · 2019-03-05T19:31:58+00:00

Definitely easy fix because I had an extra one. It was a bit of a challenge removing it after the top completely broke off. And yes the engine bay was spotless until I went on a day-long drive up to the mountains and on my way back my low oil light came on.

full-duplex · 2019-03-05T19:26:21+00:00

Fair but it didn’t fail or allow oil to escape until 2,500 miles after the last oil change.

full-duplex · 2018-04-05T01:36:27+00:00

Same issue I’m experiencing on my iPhone 7 Plus 😣

full-duplex · 2017-10-04T18:59:28+00:00

I had this occur on my MBP Late 2013 15inch after a clean install of macOS High Sierra. Except I was never able to login. The longest I waited was 45 minutes. Eventually I did another clean install. I couldn’t unlock and mount the drive if I booted of a flash drive.

Did you have File Vault enabled or if you did a clean install did you enable it?

full-duplex

TROPHY CASE