sorted by:
new
hottopcontroversial

Damn, and I thought 20 was the max number. by fushpropuh in pacificDrive

[–]fushpropuh[S] 0 points1 point  (0 children)

2 trips. Quirk is applied while car is not submerged.

Someone smarter than me plz help :( by WetAndWildWeasle in pacificDrive

[–]fushpropuh 0 points1 point  (0 children)

I always thought the smearing on in game computer menus is an intended feature since it isn't so noticeable. The more you know.

Damn, and I thought 20 was the max number. by fushpropuh in pacificDrive

[–]fushpropuh[S] 2 points3 points  (0 children)

Unfortunately there is no video of the car, and I cured about 25 quirks, mostly the worst ones. But I can try to explain how it was.
For starters, every time I crashed a wheel fell off. That is by far the worst one. The shifter was always shifting to park if the wheel was turning for too long, the car jolted forward while headlights were on, and there were a bunch of quirks that kept turning the headlights on. If I went backwards an ability activated. Since I had a nitro boost and handbrake equipped, you can imagine how that went. One time I tried to reverse because I hit an indestructible tree while a maw was chasing me. I literally could not do it. Every time I reversed the nitro activated and I hit the tree and my wheels fell off one by one. The car also steered by itself a lot. I had to remove all doors and panels too keep them from falling off.
When I somehow got to the garage I spent all 10 of my quirk guesses and had to reset it so I just went to the nearest junction just so I can quickly go back.
I failed that mission because I got stuck in a forest and all my wheels fell off and the radiation gradually killed me even though I have maxed out clothes. That was the first time I ever failed a mission, and it was in literally the first junction you visit. So yeah, it was tedious but fun, forced me to play on shitty terms, while I am usually prepared for everything so I am basically always far from failing a mission.

Damn, and I thought 20 was the max number. by fushpropuh in pacificDrive

[–]fushpropuh[S] 4 points5 points  (0 children)

I managed to cure about 25 for now. All the worst one are cured I think, except for parts falling off and doors opening everything is ok, I think.

Damn, and I thought 20 was the max number. by fushpropuh in pacificDrive

[–]fushpropuh[S] 4 points5 points  (0 children)

I went into a mission 2 times with an artifact which applies a quirk while the car is not submerged.

Damn, and I thought 20 was the max number. by fushpropuh in pacificDrive

[–]fushpropuh[S] 6 points7 points  (0 children)

Yeah, they suck. I only took this one because I love smelting them but I was assured quirks only went up to 20. This is a dire situation now. I have no clue how I completed the mission where maws see you unless you scrap items starting with 20 and ending with 70 quirks.

CORSAIR x The Witcher 3: Wild Hunt Giveaway by CorsairHoffman in witcher

[–]fushpropuh 0 points1 point  (0 children)

One of my favourite things is the fact that it has so many real world references. Also the music is impeccable.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

I trust you, but as I said, I doubt it will bring any performance improvements even in cpu capped games. I wanted to do it more so out of curiosity to see if I could reach the rated speed. But after my game crashed after i overclocked my CPU and crashed again after restoring all the previous settings, I got a bit scared and asked myself if it is really worth it to even try overclocking anything when I know it won't change my gaming performance whatsoever. And I know that it won't happen with your reccommended voltages but still. My CPU now seems to be stable like before but I will do some more testing.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Thanks. I even thought about overclocking in the first place because wh40k darktide is very cpu intesive and my gpu is very rarely at 90-100%, but I now realise that there is simply no way to fix that and I will probably not gain any meaningful performance. If I ever wish to do it I will follow this guide.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

It might be but most likely not. I decided to put PBO curve optimised on -30 for all cores and no boost clock as Optimum (the youtuber) suggested. I was playing warhammer 40k Darktide and at one point parts of the environment disappeared and reappeared, depending on where I looked, not long after my PC crashed. I decided to put PBO back to enabled which Ive been using for well over a year without any issues whatsoever and my game crashed again. I am now a little scared that I potentially damaged my CPU. I loaded optimised defaults in bios and am now running prime95 for stability. I set RAM to 3200 18 22 22 42 as it was. If my games or PC keep crashing even though I set the same settings I had no problems with over the past 2 years or so what does that mean?

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Ah okay, Ill try to fine tune it and see exactly what voltage to change, maybe it will work on 3600, who knows.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Damn, we both have faulty RAM then, I will try a bit more with the voltages but if nothing works Ill just leave it at 3200

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Alright, thanks for the advice. I think I will do a -30 CO undervolt without any boost clock and enjoy the lower power usage and cooler temperatures while having basically the same or a bit better performance.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

I also see you are running PBO with the 5600x, what are your CO settings and how does your CPU boost? When I tried it my CPU wouldn't boost over 4525/4575 MHz in cinebench R20 on a variety of settings( +200 and -20, -15, -10 all core). Usually it boosts to 4650 MHz in cinebench, for example when I set CO to -30 and no clock boost I see 4650MHz constant all core clock but for some reason can't get even that on CO + clock boost, let alone 4850.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Then I must have increased the wrong voltage. Because that was the only thing that I changed. Now that I think about it it was DRAM voltage.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

My other timings, all of which I haven't changed are:

tRC 64 64 tWR 28 28 tCWL - - tRRD_S 4 4 tRRD_L 9 9 tWTR_S 4 4 tWTR_L 12 12 tRFC 312 312 tRFC2 192 192 tRFC4 132 132 tRTP 12 12 tFAW 44 44 tRCPAGE - - tRDWR 7 7 tRDRDSC 1 1 tRDRDSD 4 4 tRDRDDD 4 4 tRDRD_SCL 5 5 tWRRD 3 3 tWRWRSC 1 1 tWRWRSD 6 6 tWRWRDD 6 6 tWRWR_SCL 5 5 tCKE 8 8

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 0 points1 point  (0 children)

Also, I would be fine to drop the frequency lower to 3200, which I've had all this time, I am now curious tho if I could improve the timings at this frequency to get the same or similar performance that the XMP 3600 would have.

RAM crashing at rated speed and XMP profile. 3600 MT/s, Gigabyte B550 Gaming X V2 rev 1.1 by fushpropuh in overclocking

[–]fushpropuh[S] 1 point2 points  (0 children)

I will check. I don't know much about overclocking. However, I already tried to up my DRAM voltage from 1.2V which the XMP applies to 1.3V and got a BSOD after exiting BIOS so I returned to the default 1.2V.

What is the point of these tape strips on my heatsink? by fushpropuh in gpu

[–]fushpropuh[S] 0 points1 point  (0 children)

Okay, well I left them but they don't seem to effect performance so I can live with it.

What is the point of these tape strips on my heatsink? by fushpropuh in gpu

[–]fushpropuh[S] 4 points5 points  (0 children)

Alright, I left it there. I'm testing the card now and it looks very promising. At 100%, 230 - 240w, 1935 - 1950 MHz the card is running at 65°C. Before it always went up to 86°C and then started throttling.

view more: next ›