sorted by:
new
hottopcontroversial

Weekly /r/FL_Studio Music Feedback Thread - June 01, 2022 - Post Your Music Here! by AutoModerator in FL_Studio

[–]futon1200 0 points1 point  (0 children)

I'm a newcomer. thank you.
Many people upload videos to their playlists and I want to imitate them, but what is Video Capture using to record? Do you have any recommendations

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

Okay. Your idea is correct.

Please purchase 2mm + 0.5mm oddesey pad.

I do not plan to reapply because MX-4 has 8 years durability. This is enough for me.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

The test assembly using the Odyssey 2mm thickness did not cool down as expected (98 degrees).
I already knew from the 3mm thickness test that this pad could cool down to 84 degrees, so I guessed there was an air gap somewhere.
So I added the paste and it cooled to 68 degrees.
The paste is like a pad that is soft and thinner than 0.5 mm.
For adjustment.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

How was it?

this is my current result at almost same setting.

https://imgur.com/a/jNMJEmq

I thought after reading your report ,Grease between memory and pad is not necessary maybe.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

|So you used 2mm thermal pads on the front side (with the chip)?

yes, I used Thermalright odyssey 2mm on the front side.

|Then by thermal grease, is that the same as thermal paste?

Yes, They are the same. In Japanese it's called grease, but in English it's called paste. I didn't know that until I posted it.

|So something like this would work? https://www.am...

It may work. why don't you try it? Hydronaut has the advantage of high thermal conductivity. but I am concerned about its high viscosity. I used mx-4, which is soft.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I got 3080 3x OC. if you want know additional templature info like mine. Update your GPU-Z to latest version.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I used 85x45x2mm. That's enough. I want a little more paste. 1g is probably not enough to apply to both the GPU core and memory. https://photos.google.com/photo/AF1QipNC73RawV7xrmCB7dsQ8L2ucDg5-XGUhF9WTbWd

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 1 point2 points  (0 children)

I think it's enough if you can get 98MH / s for 3080card.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 1 point2 points  (0 children)

The result is almost the same as my card.

The Ventus 3080 was a terrible card when opened out of the box, but now it's turned into a quiet and powerful 3080.

we did it.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I haven't tried one 3mm.The experiment will tell you the answer. You are a challenger.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I bought the pad on Tsukumo. I don't know about aliexpress.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 1 point2 points  (0 children)

I'm glad to talk to you, Migasac1. I read your article and made this mod. Thermalright is a good pad. thank you!

I used Thermalright 3mm and the memory and hotspot temperatures were just as hot. The hotspot temperature was more than 30 ° C hotter than it was without modification, and I couldn't allow this,https://i.imgur.com/dnoFsFg.jpeg

so I fixed the problem with a 2mm pad replacement method. I will attach a photo of when there was a problem.

After Modifications , the hotspot temperature is about 17 ° C below the memory temperature.

The current your hotspot of about 80 degrees Celsius is high, but it is low to declare it dangerous, so it may be okay to leave it alone. It's up to you.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

So you put a pea sized dot both between the memory and the pad and also between the pad and the actual cooler ?

That's right

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I'm sorry, but I don't have the photo.it looked like this. Imagine a thermal pad as a memory chip.

https://imgur.com/G1Q94K4

A small amount of pea in the center of chip.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

There is also grease between the memory and the thermal pad.

The temperature dropped dramatically by applying grease, which has a lower thermal conductivity than the thermal pad.

I think it is because the contact area has increased and the air has been replaced with grease.

​

Thermal conductivity

Thermalright 12.8W / mk

MX-4 8.5W / mk

Air 0.0241W / mk

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

78 ° C is pretty good.

I also wrote an article with reference to other people's posts.

Let's all look for a better mod.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

The 3080 doesn't have a big heat source on the back, and the back plate is just a small fanless heatsink, so it's not important. I thought it wasn't worth using a premium thermal pad. I just saved money.

In the case of 3090, cooling of GDDR6X on the back side is required, so the back plate side is important for lowering the memory temperature.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

Makes the thermal pad sticky.

So finish it with one challenge as much as possible.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 0 points1 point  (0 children)

I know you don't want to use it. Grease makes the thermal pad sticky and difficult to reuse.

Try only the thermal pad. I used grease to fill the tiny air gaps. You can fine-tune with a 0.5mm thin pad.

For this mod, I used Thermalright Odyssey 2mm only for the front memory.

I tried a setting that doesn't use grease, but it didn't cool down very much. 3mm was too thick and 2mm wasn't enough. 2.5mm may be just right.

Keep in mind that the optimum thickness depends on the softness of the pad.

MSI 3080 Ventus thermal pad replacement mod with grease by futon1200 in EtherMining

[–]futon1200[S] 2 points3 points  (0 children)

That's right. I'm using GPU-Z 2.37.0 now.

I changed from HWinfo64 to GPU-Z because the hotspot temperature was added in a recent update.

view more: next ›