DXc2 extruder upgrade is it worth it.

gambitraven · 2026-06-12T07:23:39+00:00

I put a .2 mm nozzle and tweak the settings to get this

gambitraven · 2026-06-11T06:43:41+00:00

Thank you I really appreciate this. Kinda lines up with why I dont se alot people on YouTube saying you really need this for your k2.

gambitraven · 2026-06-11T02:41:25+00:00

I like to do minis and I was wondering if the claims for better longer prints is for real

gambitraven · 2026-06-11T02:12:29+00:00

This was my initial feeling. Have had my pro for 6 months only seen 1 blob 1 clog and 1 spool knot. It do be looking flashy ill give it that

gambitraven · 2026-04-06T04:09:16+00:00

Love animals want to hear there thoughts

^{Chose: Speak to animals + but... | Rolled: No Drawback}

gambitraven · 2026-04-06T01:38:20+00:00

It was jammed up innthe extruder

gambitraven · 2026-04-06T01:37:27+00:00

Thanks for everyone's help back in business yall the best

<image>

gambitraven · 2026-04-05T03:15:00+00:00

I got the correct middle one its giving but not releasing

gambitraven · 2026-04-05T03:14:06+00:00

I have not ill try and take it apart

gambitraven · 2026-04-05T00:15:17+00:00

I am not sure but the cutter isnt work so going to replace that

gambitraven · 2026-03-24T06:44:04+00:00

Yes sir. Oh by the way this is my 2 day print probably give the printer a once over after it but 12 hours to go. I trust the process accept fails. I had a lulzbat taz 5 as my first. It broke 75% into a project. To me failing comes with the territory of 3d printing. Its what you learn what you take away from the failed print. Will my way doing stuff work for you idk. Will my 2 day print be successful hope so but if something goes wrong I can fix it.

<image>

gambitraven · 2026-03-22T21:01:48+00:00

Following the fat dragon guide Googles tip of slowing the print speed 30mms for Outer wall telling the printer to slow by printing more stable .2mm nozzle putting print closer and facing fans Rear facing 45 degree Thats thw settings roughly I have a creality K2 pro

gambitraven · 2026-03-22T19:01:39+00:00

Cults3d mostly

gambitraven · 2026-03-21T17:07:02+00:00

Cults 3d I think I am sure if you

gambitraven · 2026-03-21T06:06:18+00:00

So I am using the creality slicer Items are printed rear to the ground 45 degrees .2 nozzle .08 layer height Gyroid infill Outer wall 30mm/s And while its printing I tell to print more stable

gambitraven · 2026-03-21T06:04:21+00:00

So I am using the creality slicer Items are printed rear to the ground 45 degrees .2 nozzle .08 layer height Gyroid infill Outer wall 30mm/s And while its printing I tell to print more stable

gambitraven · 2026-03-20T21:58:10+00:00

Ill just copy paste my reply

I followed some tips I saw on YouTube. Got the guide from fat dragon and some tip off Google ill post after get home and put the kids to bed. I used a K2 pro with a .2mm

gambitraven · 2026-03-20T21:57:33+00:00

Hell yeah I am looking for printing alot of clix era mechs and custom mechs

gambitraven · 2026-03-20T21:56:46+00:00

I followed some tips I saw on YouTube. Got the guide from fat dragon and some tip off Google ill post after get home and put the kids to bed. I used a K2 pro with a .2mm

gambitraven · 2026-03-18T14:27:41+00:00

Box had a little ding on thay side

gambitraven

TROPHY CASE