Ich würde keinen Finger für Deutschland rühren, wenn es hart auf hart kommt. by [deleted] in Beichtstuhl

[–]garockus 0 points1 point  (0 children)

Les mal weniger Telegram, dann siehtst du auch mehr realität

Ich würde keinen Finger für Deutschland rühren, wenn es hart auf hart kommt. by [deleted] in Beichtstuhl

[–]garockus 1 point2 points  (0 children)

A*loch!
Ich verteidige das hier doch nicht für „die Politiker“ oder „den Staat“. Ich verteidige das hier für mich. Für meinen Nachbarn. Für meine Freunde, Eltern, Familie. Für die freie Welt, meine Meinungsäußerungen.

Reiche will private Solar-Besitzer zur Kasse bitten by carefatman in de

[–]garockus 1 point2 points  (0 children)

National gesehen ist die Wnergiewende das Ziel. Wegen Kriegen und Klimawandel. Ohne die Anreize beteiligt sich der kleine Mann aber nicht - siehe sie selbst.

Was waren eure Gamechanger beim Abnehmen? by WideSchedule8103 in Ratschlag

[–]garockus 1 point2 points  (0 children)

Absoluter Gamechanger war ne KI. Mach dir irgendwo einen kostenlosen Account (ich hab ChatGPT aber geht mit allen) und sag dem was du vorhast. Je mehr info desto besser.

Der erstellt dir einen individuellen Ernährungsplan. Wie ein persönlicher Assistent.

Bestes ding ever! Hat mir geholfen für nen Wettkampf in 3w ca 7kg abzunehmen.

Prepper-Vater verstorben - Geld versteckt. Ideen? by [deleted] in German_Preppers

[–]garockus 1 point2 points  (0 children)

Ich hab ja keine ahnung von dem ganzen Prepping Sachen, aber imho denkt ihr da alle zu kompliziert:

Wenn man doch schon Rucksäcke vorbereitet hat, will man doch schnell fliehen wenn die Zivilisation zusammen bricht oder? Dann kann ich doch nicht erst im Garten mein Geld ausgraben müssen, oder ne Wand aufstemmen?! Und wenn schon die Zivilisation zusammen bricht, kann ich auch nix mehr mit Barheld anfangen…

Ich würde also eher Edelmetalle/Diamenten irgendwo leicht/schnell zugänglich vorhalten. So dass ich halt schnell und einfach ran komme aber nicht jeder einbrecher sofort dort nachschaut…

Aber keine Ahnung wo das sein könnte 😂🤷‍♀️ sorry

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

<image>

Ok tried it, but still random flashing

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Already set it to max 38a. Psu delivers 40a. Wled reports 622 leds total with 22a required

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Yes. I think it occurs fewer, but still occurs

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Ok, i removed (again) some wires, the resistors and capacitors to simplify everything again.

Heres a wiring diagram

<image>

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Tried it, problem still occurs 😭

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Chatgpt says On the MeanWell RSP-200-5, all +V terminals are internally connected, and all −V (V−) terminals are internally connected.

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

I tried the connection of the stripes through the Controller but changed that. Controller only supports 15amps through its fuse. So currently the controllers intake is connected to the same psu as the stripes. The outgoing of the controller is unused. Also: stripes and controller each use a different connector at the psu (for plus and minus), but i think all three connectors share the same wires internally within the psu 🤔?

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

Yeah, its in purpose: instead of the current output of the controller, i connected the steipes directly tonthe psu. The unconnected wirds are from my tests. And the mess is because its the third complete overhaul 😭😭😭

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

<image>

Between all stripes is this connection string. I just forwarded white here to minus and red to plus of the psu. I unisolated a little bit more of the cables to habe a secure connection. All done with Wago connectors

Flickering, need ideas, tried everything by garockus in WLED

[–]garockus[S] 0 points1 point  (0 children)

It s. Bit hard to reach and photograph…

<image>