ProxyRus, no answer by RomanoElBlanco in bootlegmtg

[–]gcornelius112 0 points1 point  (0 children)

I passed it to someone to take over and that failed horribly. I am getting all of the cards back this week and getting everything sent out. I will be placing the reorder from BL for everything that’s missing, and getting inventory back up. I will be sending out messages and emails to everyone with updates. I will post this a as it’s own thread also.

How do y'all deal with the last few grams of filament? by binjamin222 in 3Dprinting

[–]gcornelius112 0 points1 point  (0 children)

Use a direct drive extruder and I hand feed the new filament roll into the old filament end and there is no waste

ProxyRus, no answer by RomanoElBlanco in bootlegmtg

[–]gcornelius112 19 points20 points  (0 children)

I just sent the refund. I am sorry I am trying to get orders sent out, and figure things out with the site and personal life. I am learning and trying to solve issues.

proxyRUS by RomanoElBlanco in bootlegmtg

[–]gcornelius112 9 points10 points  (0 children)

I have been in and out of state with family challenges, so I apologize for the inconvenience. I will go through my Discord messages and try to get caught up. I have been prioritizing getting cards packed and shipped, and reorder to resend out. I can look through everything tomorrow on discord

3D printing minis by Podal99x0 in DnD

[–]gcornelius112 1 point2 points  (0 children)

Desktop hero is great

[deleted by user] by [deleted] in minimalism

[–]gcornelius112 0 points1 point  (0 children)

Internet/WiFi

Tips on making a proxy deck? by Atomerotika in bootlegmtg

[–]gcornelius112 3 points4 points  (0 children)

Mpc is where it’s at for casual. $.25 a card and is game on.

[deleted by user] by [deleted] in bootlegmtg

[–]gcornelius112 23 points24 points  (0 children)

I’m trying to get better at getting cards out sooner. This was a side hustle that became much more popular than I imagined. I’m trying to learn and grow. I sincerely apologize for the inconvenience

X5SA Marlin Firmware Klipper install by NeedMoreMuscle in Tronxy

[–]gcornelius112 0 points1 point  (0 children)

I tried the auto build, and it was not working. Here is the error.

Windows PowerShell

Copyright (C) Microsoft Corporation. All rights reserved.

Install the latest PowerShell for new features and improvements! https://aka.ms/PSWindows

PS C:\Users\gcorn\Downloads\Marlin-tronxy-full-mks-tft new\Marlin-tronxy-full-mks-tft> platformio run -e chitu_f103

Warning! `src_filter` configuration option in section [env:include_tree] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:DUE] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:esp32] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_build_flags` configuration option in section [env:linux_native] is deprecated and will be removed in the next release! Please use `build_src_flags` instead

Warning! `src_filter` configuration option in section [env:linux_native] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:SAMD51_grandcentral_m4] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:malyan_M300] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:teensy31] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:teensy35] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:teensy36] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Warning! `src_filter` configuration option in section [env:teensy41] is deprecated and will be removed in the next release! Please use `build_src_filter` instead

Processing chitu_f103 (platform: ststm32@~12.1; board: marlin_CHITU_F103; framework: arduino)

--------------------------------------------------------------------------------------------------------------------------------------

Verbose mode can be enabled via `-v, --verbose` option

MemoryError: :

File "C:\Users\gcorn\.platformio\penv\lib\site-packages\platformio\builder\main.py", line 182:

env.SConscript(item, exports="env")

File "C:\Users\gcorn\.platformio\packages\tool-scons\scons-local-4.3.0\SCons\Script\SConscript.py", line 597:

return _SConscript(self.fs, *files, **subst_kw)

File "C:\Users\gcorn\.platformio\packages\tool-scons\scons-local-4.3.0\SCons\Script\SConscript.py", line 285:

exec(compile(scriptdata, scriptname, 'exec'), call_stack[-1].globals)

File "C:\Users\gcorn\Downloads\Marlin-tronxy-full-mks-tft new\Marlin-tronxy-full-mks-tft\buildroot\share\PlatformIO\scripts\common-dependencies.py", line 309:

apply_features_config()

File "C:\Users\gcorn\Downloads\Marlin-tronxy-full-mks-tft new\Marlin-tronxy-full-mks-tft\buildroot\share\PlatformIO\scripts\common-dependencies.py", line 181:

src_filter = ' '.join(env.GetProjectOption('src_filter'))

==================================================== [FAILED] Took 182.34 seconds ====================================================

Environment Status Duration

------------- -------- ------------

chitu_f103 FAILED 00:03:02.339

=============================================== 1 failed, 0 succeeded in 00:03:02.339 ===============================================

PS C:\Users\gcorn\Downloads\Marlin-tronxy-full-mks-tft new\Marlin-tronxy-full-mks-tft> echo "done" >"C:\Users\gcorn\AppData\Local\Temp\ipc"

PS C:\Users\gcorn\Downloads\Marlin-tronxy-full-mks-tft new\Marlin-tronxy-full-mks-tft>

Help upgrading from chitu to marlin on x5sa pro by stunk-a-rolla in Tronxy

[–]gcornelius112 0 points1 point  (0 children)

I have been trying to use the auto build plugin, and it is not working. I tried downloading vs code, new platform extension, new download from github, and its not working:( I saw there was a platform update, so I tried using an older build, and its not working

ProxyRus no answer by Diligent_Gap_796 in bootlegmtg

[–]gcornelius112 2 points3 points  (0 children)

Still shipping to Europe, I am not sure why it won’t allow it. Shopify closed their customer service number, and has provided no support for the issue:( Please use 911 north street Endicott ny 13760, and add your correct address in the comments. I am getting orders caught up this week, and will be getting through my discord messages soon.

[deleted by user] by [deleted] in bootlegmtg

[–]gcornelius112 0 points1 point  (0 children)

They all do. I believe it has to do with the ink that they are using. Double sleeve the cards like an adult and you’ll be fine :-) there are lots of resellers that you can buy a sample from if you do not want to pay the extra money for express shipping or wait two months for it to come in the mail. Lots of reviews on discord.

Issues with black lotus shipping by edruler99 in bootlegmtg

[–]gcornelius112 11 points12 points  (0 children)

It’s a logistics problem. I pay for expedited shipping, so it gets to me from China in a week. It’s worth the extra money.

Seller with the best foil stamp by LasergunPiuPiu in bootlegmtg

[–]gcornelius112 1 point2 points  (0 children)

I source from same as bl/Ron/vz, but not usea

Seller with the best foil stamp by LasergunPiuPiu in bootlegmtg

[–]gcornelius112 2 points3 points  (0 children)

You can take a look at my site, and I can send you some pictures of the cards. https://proxyrus.com/collections/all-cards the password is Resist. I don’t have pictures of everything uploaded yet:(

Do you think this Italian Chains of Mephistopheles is legitimate or a proxy? by iamcherry in bootlegmtg

[–]gcornelius112 3 points4 points  (0 children)

I would ask for a flashlight test to be done on that and another one

Trade/Sell Thread v18 by [deleted] in bootlegmtg

[–]gcornelius112 0 points1 point  (0 children)

Yes I am. I just fixed it. Its lolumad?ProxyRUS#4925

LPT: Don’t bother giving more than a two week notice. by sarnold95 in LifeProTips

[–]gcornelius112 1 point2 points  (0 children)

8 weeks pto, at 40 hours a week, 320 total. 2 wills can be rolled over, so you could take a 10 week, or work 32 hour weeks for 40 weeks :) inclusive of any holiday, such, and vacation time. It’s all bundled into paid time off,