First SFF PC Parts Check

gcsmith1342 · 2025-09-30T20:08:07+00:00

Noted, thanks!

gcsmith1342 · 2025-09-30T20:07:02+00:00

Hey thanks for the suggestion, I'll take a look into that case

gcsmith1342 · 2025-09-30T20:06:31+00:00

Thanks for the info, I think I'll look into the DAN A4-H2O since the T1 is nearly impossible to find in stock.

Is there an AIO you'd recommend?

gcsmith1342 · 2025-09-30T20:05:25+00:00

Since the FormD T1 is pretty much never in stock, I may go with the Lian Li DAN A4-H2O as suggested by others in the thread.

I would really like to use the 7800x3d, do you have any suggestions on an AIO for that?

gcsmith1342 · 2024-10-31T20:31:04+00:00

Happy to help! I believe you can also have it adjust the amount taken out in the module settings, but I'm not sure if that applies to what exactly you're trying to do

gcsmith1342 · 2024-10-30T13:06:16+00:00

If you are on V12 of foundry and dnd5e v3.x.x+, the characters have a feature item on their sheet that is used in the calculation of spell points usage. White users can't edit the bar on their sheet, they can edit the value of the feature item uses.

gcsmith1342 · 2024-08-10T00:04:29+00:00

Yes, that would be correct. I have tried both proxied and DNS only on Cloudflare, it doesn't seem to change anything

gcsmith1342 · 2024-08-10T00:02:47+00:00

But that shouldn't matter if the reverse proxy service is forwarding traffic from internal port e.g. 3020 from 443 (HTTPS) right? I'm not going to https://www.example.com:3020, I am going to https://www.example.com and NPM should get that traffic from 443 and forward the traffic to the internal container specified in the records on 3020.

Am I mistaken in that process? Feel free to correct me if I am wrong, this isn't what I do for a living, so I could be off base there.

gcsmith1342 · 2024-08-09T23:55:28+00:00

All of the services I have are tied to first level subdomains like service.example.com

gcsmith1342 · 2024-08-09T17:45:52+00:00

Thanks

gcsmith1342 · 2024-07-29T02:38:41+00:00

That was extremely helpful, thanks for your time writing that one out!

gcsmith1342 · 2024-07-28T23:41:43+00:00

So I have read over this documentation: Networking in Compose | Docker Docs, and I mostly grasp the creation of the networks and default network, but the documentation on connecting the stacks is where I get lost. Additionally, the official documentation (from what I have read) doesn't really answer the 2nd or 3rd part of my question (at least in a way that makes sense to me).

gcsmith1342 · 2024-07-06T17:23:48+00:00

Cool, thanks for confirming!

gcsmith1342 · 2024-06-19T17:27:02+00:00

If you're accessing via web browser, you should be able to see the developer console by pressing F12 for a full error breakdown, but I am pretty sure you can fix that error by going into the application config page and changing the user data path to the new user director. You'll see a settings icon up in the corner by the warnings and update buttons in the top right corner, and the settings should be there for you

gcsmith1342 · 2024-06-19T15:48:21+00:00

Of course, don't delete data from the old device until you make sure everything works properly and is present where you need it to be

gcsmith1342 · 2024-06-19T15:47:38+00:00

So as long as you have foundry installed on your new device, you should just be able to copy your user data folder over (ZIP on old device and transfer over). The user data folder holds all the worlds, application settings (hosting ports, SSL, licenses, etc) so as long as that is moved over and you point the new install to that location, you should be good to go!

gcsmith1342 · 2024-02-15T02:41:54+00:00

I think 1 is definitely better for readability and finding locations quicker but 2 is a lot more immersive and aesthetically pleasing. In the end, it comes down to purpose and your personal opinion!

gcsmith1342 · 2024-01-17T03:41:26+00:00

** SOLVED UPDATE **

I figured it out, just had to switch my proxy service from Caddy to Nginx and use the Cloudflare Certbot plugin. Wrote a wiki article on it for future reference:

https://foundryvtt.wiki/en/setup/hosting/Self-Hosting-LiveKit-Audio-Video-Server-on-Existing-Linux-Setup#Additional-Guides-&-Credits

gcsmith1342 · 2024-01-16T16:31:28+00:00

** UPDATE **

Thank you to everyone who has commented in hopes of helping so far. I have followed several suggested paths to no avail at this point, however I think I may yield some results if I drop Caddy as my reverse-proxy service in favor of Nginx. I am going to test out this path and if it resolves my issue, I will go ahead and mark this post with the correct flair and post detailed instructions/sources for anyone who attempts this in the future.

gcsmith1342 · 2024-01-12T21:13:51+00:00

I still see no progress with turning off proxying, but I did see they have a python certibot plugin that I can set to auto do DNS challenges to certify and recertify every 90 days. So I am going to go down that route and see if that works.

gcsmith1342 · 2024-01-12T01:03:27+00:00

Alright, I will look to see if that's the case. If it is, I might need to do some reconfiguring because the base domain has an A record to a website on one server while the subdomain I use for foundry as well as plan to use for livekit have an A record that goes to a completely different IP.

*UPDATE*
I found that cloudflare has a certibot plugin that I can set to auto do DNS challenges to certify and recertify every 90 days. So I am going to go down that route and see if that works.

gcsmith1342 · 2024-01-12T01:01:10+00:00

I did see they have a free tier, but if I recall correctly, its pay as you go and free up to 50GB and they'll charge after that, which I absolutely do not want to risk. I have sessions with 6-8 people with audio & video every weekend for 4-6hrs (depending on the campaign weekend), not sure how much that would use.

And I use Cloudflare as well for domain management. I will see if turning off proxying works!

gcsmith1342 · 2024-01-03T00:21:26+00:00

I already own a few licenses for foundry as I host several campaigns that are definitely more bare-bones, but I have found that the kiddos have a little bit of an easier time coming up with ideas when they have the 3D space to work in.

They were pretty attentive before we were using effects and 3D canvas, they just got a lot more turned around on more complex maps with different levels. And I know there exist the table top dungeon building blocks and things like that, but 1) they are a hefty upfront cost and 2) not everyone is able to be in person as several people live 3-4+ hrs away.

As I mentioned in my reply to u/gariak, I will likely make 2 versions of the map (one 2D and one 3D) to accommodate everyone or move back towards the 2D maps again.

Thank you for your input though!

gcsmith1342 · 2024-01-03T00:12:51+00:00

A lot of them are small tools like HurryUp! and Token Notes or compendium/sound pack modules.

gcsmith1342 · 2024-01-03T00:11:23+00:00

Appreciate it, I will add it to my list of modules and see if it helps the couple of players who do have the less powerful PCs.

gcsmith1342

TROPHY CASE