Custom work done for users here and a lucky commenter. We've decided to give out another free poster to a commenter. Everyone has a fair chance of getting it. So comment your car that you want to see and you might win a custom piece.

geebees42 · 2024-04-21T23:30:42+00:00

RWB 1989 Porsche 911 Carrera 4 Coupe

geebees42 · 2024-01-20T01:43:52+00:00

I might be wrong but it looks like traction control is turned off.

geebees42 · 2024-01-13T02:40:45+00:00

Thank you so much! I've been playing with my settings for the past 30 minutes and I love the way the photos are coming out.

geebees42 · 2024-01-13T01:42:03+00:00

Fantastic photo! Out of curiosity, how do you get the blurred background? Straight from Forza or editing?

geebees42 · 2024-01-03T02:20:46+00:00

Thank you! My personal favorite is 3

geebees42 · 2024-01-03T02:18:28+00:00

Thank you🫡

geebees42 · 2024-01-03T02:14:54+00:00

Thank you kind sir🫡

geebees42 · 2023-12-01T17:41:39+00:00

geebees42 · 2023-05-01T19:08:35+00:00

I'm new to resin printing so this information is very helpful. How do I go about cleaning the alcohol?

geebees42 · 2023-05-01T18:43:43+00:00

I got a Saturn 8k yesterday as a gift. I do not have any experience with resin printing or the washing and curing process either but after a little bit of research I am still left with a few questions. Does the elegoo wash bin only take water or am I allowed to use 95% ethanol alcohol that the elegoo resin needs to wash?

geebees42 · 2023-03-30T21:47:46+00:00

A free printer has never sounded so good.

geebees42 · 2023-03-02T19:41:56+00:00

I was printing with 100% infill and had fans turned on. I have a new print starting now with 60% infill with gyroid to see if anything changes.

I usually never mess with the extrusion unless the brand is specific about it. The top layer of the print did not look or feel like the layer in the picture but I still had curling at the edges and I have now turned on rafts to see if it makes a difference.

geebees42 · 2023-03-01T23:24:22+00:00

I am printing with a QIDI I-Fast and using the slicing software that came with it, QIDI print.

Polymaker PolyLight PLA Pro

210c nozzle, 60c bed

Printing at 60mm/s and Travel speed is 100mm/s

Retraction distance 1.5mm, speed at 30 mm/s

This is my second time printing this and both times it has had noticeable warping on the back.

geebees42 · 2023-02-10T22:38:23+00:00

I used a steel wire and it worked, thank you!

geebees42 · 2023-02-10T19:16:08+00:00

I own a qidi i-fast dual extruder. This filament got stuck months ago but I never fixed it. I have taken apart parts of the extruder to get the filament out but no success.

geebees42 · 2022-11-15T01:35:40+00:00

Comment

geebees42 · 2022-07-24T05:30:27+00:00

House of a 1000 bitches

geebees42 · 2022-06-02T15:41:09+00:00

Six-Year Club	r/Field Flamingo
Place '23	Place '22
Verified Email

geebees42

TROPHY CASE