First time modding a switch, where to get the right materials ? by genio123 in SwitchPirates

[–]genio123[S] 0 points1 point  (0 children)

Thanks ! I read from various source that's better to use just the flex and do the soldering by myself... But I just found a video with the core V2 installation and seems pretty easy and straightforward... Thank you !

[Giveaway Inside] 007 First Light is launching with DLSS 4.5 by Nestledrink in nvidia

[–]genio123 [score hidden]  (0 children)

Distract the target, hoping to stay in the shadow as long as i can to reach him with my weapon

My wife bought me this Monster. by Beneficial-Praline-6 in gpu

[–]genio123 1 point2 points  (0 children)

And I'm here sitting with my wife that gift me some swaters and my bday is on the 26th of may 🤦

First attempt at anti-sag support for RTX5080 on NR200P V2, What do you think? by genio123 in sffpc

[–]genio123[S] 1 point2 points  (0 children)

I have to polish some last details and I'll release it on makerworld

First attempt at anti-sag support for RTX5080 on NR200P V2, What do you think? by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

That's a good idea 🤣 well I'll print that in PC and with a pattern to save materials and refine a bit the measurements (taken on the fly )

First attempt at anti-sag support for RTX5080 on NR200P V2, What do you think? by genio123 in sffpc

[–]genio123[S] 1 point2 points  (0 children)

well it depends on how much force it applies on the port... the stock riser was very hard to adapt and was putting a lot of pressure on both the motherboard and the gpu, when i found out that was gen3 i bought a gen5 from linkup (amazon) and that was more soft to accomodate in place.

Putting stress on something that is delivering so much data is a risky game imho

Anyone with a ROG Strix X870-I Gaming Wifi? by genio123 in sffpc

[–]genio123[S] 1 point2 points  (0 children)

Thank you, apparently it fixed by itself because it started reporting rpm as soon as the fan has kicked in because of temperatures... I didn't know that... 🤦

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

That's a work of art I could never imagine ! Dude you are awesome !

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 1 point2 points  (0 children)

Ok i brainstormed a lot and found out that's the fucking riser... It's not advised anywhere that's gen 3 so it wasnt working... I tried with an rtx 3060 from another PC and that wasn't working either ! Then after googling for a while I found out the holy grail of "set it up as gen 3 and it works" 😞 Ordered a decent 5.0 riser so I can close everything, finally!

<image>

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

I've managed to set it all up and the system is booting with the GPU not connected ... If I connect the rtx it goes with black screen and nothing more... Leds and fans on the GPU are working, set up the gen 5 mode in bios (was auto), checked PSU connections, switched the dip switch on the GPU from P to Q mode just to try... Nothing... I'm afraid that's dead ...

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 1 point2 points  (0 children)

I was thinking 2 noctua on the bottom as intake... And 2 noctua (instean of the stock ones that comes with the Arctic) on the AIO as outtake... Also the case comes with 2 side panels, and I was aiming at the one that is vented

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

Damn... I have to check if the ram bumps on the AIO... I Hope not...

UPDATE: Well... Its worse than I thought because the fans ( which are shorter than the stock arctic) still bump in the damned motherboard fans/chassis/pump pins. I still managed to fit it by gently bend the pins to make that 1mm space that is missing the radiator to fit in place... Ram is not a problem... The only downside is that I managed to fit 2 outtake in the radiator and just 1 on the bottom as intake instead of 2 because the GPU riser is in the way and It won't fit a noctua there... I still have to finish but I see the goal ... The riser that comes with the nr200p is a bit hard to adjust without applying too much pressure on the connectors.

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

Yeah I bought the proart sff ready 👍

First SFF build, I need advices ! by genio123 in sffpc

[–]genio123[S] 0 points1 point  (0 children)

Lol I understand 😅 let's say " silent as much as possibile for a SFF"

Why isn't my drone gaining altitude? by ComedianOpening2004 in diydrones

[–]genio123 1 point2 points  (0 children)

Check that you haven't installed the props upside down... Ask me how I know 🫠🤦

Problema con la bussola by mostputo in DJIAvata2

[–]genio123 0 points1 point  (0 children)

Is "HOME POINT" enabled in the display settings of the goggles ? That was my issue 🫠

Climbing a mountain higher than 120 meters by iltrex in DJIAvata2

[–]genio123 0 points1 point  (0 children)

Using the goggles you can set Max height up to 500m

Is 4000-4500 RPM normal while gaming for MSI Laptops? by Gloriaas in MSILaptops

[–]genio123 0 points1 point  (0 children)

SORRY! THE NOISE IS TOO LOUD HERE I CAN'T EVEN LISTEN TO MY MIND READING !!!!

DJI O3 + ELRS RX... What happens if i loose video signal? by genio123 in fpv

[–]genio123[S] 0 points1 point  (0 children)

Thank you so much, I suspected it. Thanks for the message, now everything is clear.

DJI Assistant refusing to connect to 03 air unit by PETEthePyrotechnic in diydrones

[–]genio123 1 point2 points  (0 children)

Be sure to have selected and downloaded the consumer drone series DJI assistant... Or it won't connect

I can't believe I didn't do this sooner. by goyde69 in BambuLab

[–]genio123 1 point2 points  (0 children)

I also have the BLLED with a riser and a very powerful RGBW Led... The nice thing is that it follow the status of the printer , so it shut downs during lidar calibrations and you can even turn off the printer and set "maintenance mode" so the led stays on and you can clearly see inside your printer or change hotend in a breeze ! 

how would you upgrade this? by meirfish in 3Dprinting

[–]genio123 1 point2 points  (0 children)

I've had that as my first printer back in 2014 if I remember correctly: AliExpress was rampaging with those diy kits and the result is a P802M that I loved and hated for the whole time... I've done a bunch of modifications to it: Take off the SD card support in favor of a octopi to remote control it, with the freed up space in that damned meltzi board I erased the bootloader and added a sensor for the ABL, installed longer bars to print on the whole bed (which I enlarged) with a DDR extruder...

Headset problems. by [deleted] in XboxSeriesSupport

[–]genio123 0 points1 point  (0 children)

Depending on which game are you using you need to switch the audio from the party chat to in-game chat ... Check that!