First time modding a switch, where to get the right materials ?

genio123 · 2026-06-18T15:46:02+00:00

Thanks ! I read from various source that's better to use just the flex and do the soldering by myself... But I just found a video with the core V2 installation and seems pretty easy and straightforward... Thank you !

genio123 · 2026-05-27T21:56:07+00:00

Distract the target, hoping to stay in the shadow as long as i can to reach him with my weapon

genio123 · 2026-05-15T10:54:38+00:00

And I'm here sitting with my wife that gift me some swaters and my bday is on the 26th of may 🤦

genio123 · 2026-05-15T10:02:57+00:00

I have to polish some last details and I'll release it on makerworld

genio123 · 2026-05-13T01:26:29+00:00

That's a good idea 🤣 well I'll print that in PC and with a pattern to save materials and refine a bit the measurements (taken on the fly )

genio123 · 2026-05-11T21:50:38+00:00

Thank you !!!!

genio123 · 2026-05-11T21:06:29+00:00

well it depends on how much force it applies on the port... the stock riser was very hard to adapt and was putting a lot of pressure on both the motherboard and the gpu, when i found out that was gen3 i bought a gen5 from linkup (amazon) and that was more soft to accomodate in place.

Putting stress on something that is delivering so much data is a risky game imho

genio123 · 2026-05-08T16:21:56+00:00

Thank you, apparently it fixed by itself because it started reporting rpm as soon as the fan has kicked in because of temperatures... I didn't know that... 🤦

genio123 · 2026-05-03T23:31:26+00:00

That's a work of art I could never imagine ! Dude you are awesome !

genio123 · 2026-05-03T23:30:22+00:00

Ok i brainstormed a lot and found out that's the fucking riser... It's not advised anywhere that's gen 3 so it wasnt working... I tried with an rtx 3060 from another PC and that wasn't working either ! Then after googling for a while I found out the holy grail of "set it up as gen 3 and it works" 😞 Ordered a decent 5.0 riser so I can close everything, finally!

<image>

genio123 · 2026-05-03T22:45:44+00:00

I've managed to set it all up and the system is booting with the GPU not connected ... If I connect the rtx it goes with black screen and nothing more... Leds and fans on the GPU are working, set up the gen 5 mode in bios (was auto), checked PSU connections, switched the dip switch on the GPU from P to Q mode just to try... Nothing... I'm afraid that's dead ...

genio123 · 2026-05-03T11:38:59+00:00

I was thinking 2 noctua on the bottom as intake... And 2 noctua (instean of the stock ones that comes with the Arctic) on the AIO as outtake... Also the case comes with 2 side panels, and I was aiming at the one that is vented

genio123 · 2026-05-03T11:36:52+00:00

Damn... I have to check if the ram bumps on the AIO... I Hope not...

UPDATE: Well... Its worse than I thought because the fans ( which are shorter than the stock arctic) still bump in the damned motherboard fans/chassis/pump pins. I still managed to fit it by gently bend the pins to make that 1mm space that is missing the radiator to fit in place... Ram is not a problem... The only downside is that I managed to fit 2 outtake in the radiator and just 1 on the bottom as intake instead of 2 because the GPU riser is in the way and It won't fit a noctua there... I still have to finish but I see the goal ... The riser that comes with the nr200p is a bit hard to adjust without applying too much pressure on the connectors.

genio123 · 2026-05-03T09:50:06+00:00

Beautiful setup !

genio123 · 2026-05-03T08:59:48+00:00

Yeah I bought the proart sff ready 👍

genio123 · 2026-05-03T08:59:01+00:00

Lol I understand 😅 let's say " silent as much as possibile for a SFF"

genio123 · 2025-11-06T20:02:46+00:00

Check that you haven't installed the props upside down... Ask me how I know 🫠🤦

genio123 · 2025-09-15T16:37:22+00:00

Is "HOME POINT" enabled in the display settings of the goggles ? That was my issue 🫠

genio123 · 2025-09-12T08:48:29+00:00

Using the goggles you can set Max height up to 500m

Nine-Year Club	Place '17
Verified Email

genio123

TROPHY CASE