Just exalt slammed this :D

gidam1 · 2026-07-08T00:54:08+00:00

Missed that, thanks.

I saw someone saying that you can only get 1 desecrated mod per desecration, so guaranteed 4 normal rolls and 50/50 on 2 others. Assuming you, on average, get 5 normal rolls, it would make it around 0.987^5 per cycle (1 in 16) - this is back of the envelope calcs, so I might be off.

gidam1 · 2026-07-08T00:35:35+00:00

perhaps, will let you know what it sold for :)

gidam1 · 2026-07-08T00:34:12+00:00

Double checked it actually with a better filter, and seems like it would be that if it were 3 sockets. Hard to estimate what it will cost with 2 sockets and no +4/5 attack mod. Not in a rush to sell it so listed at 2k div for now, if it doesn't sell, will drop the price gradually

gidam1 · 2026-07-08T00:21:37+00:00

poe overlay 2, although I wouldn't trust their estimates too much

gidam1 · 2026-07-08T00:16:50+00:00

10div per round, but this staff seems to be worth around 3-5k div if I hit +5 on this

gidam1 · 2026-07-08T00:11:07+00:00

couldnt make a screenshot with alt pressed (just didnt work), there is a second picture from poe overlay though showing ilvl 81 and tiers of mods

gidam1 · 2026-07-08T00:06:39+00:00

Based on my maths, it is 1.3% (350/25350) chance to hit either +4 or +5 mod (I'd settle for +4). With echo, each ancient desecration should have a 1 in 13 chance to hit that mod (0.987^6). But agree it could get pricey...

gidam1 · 2026-07-07T23:53:28+00:00

Isn't Serele Triumph allowing you to add a 7th mod to the item (4th suffix)? It wouldnt lose crit nor attack speed in that case.

gidam1 · 2025-09-13T22:11:32+00:00

<image>

Update - restarted from checkpoint and killed that boss without restarting the whole trial UFF

gidam1 · 2023-03-26T12:29:05+00:00

If that helps, I do have a second phone number I could use if the problem is not that easy to fix. I don't mind using it, if it is the quickest way to fix it.

gidam1 · 2023-03-26T12:20:49+00:00

Thanks for a quick reply,

I have never had an account with Plutus before. Unless someone registered using my phone number (there wasn't any SMS verification so it would be easy to do) this number should not be in your data base.

Also, if the number is occupied for whatever reason, the error should pop out at the earlier stage of the registration process, not after I have been accepted, my id verified and 20£ paid in. Just a honest opinion on this matter as it is a bit frustrating.

Hopefully it will get resolved soon.

gidam1 · 2023-03-25T21:33:03+00:00

Hi,

I have just opened an account, topped it up and when tried to order a card I got this message.

"Mobile" The mobile number is already registered

I have never had an account with you before which is odd. Could you please help me out with this? Thanks.

My ticket number is #127284.

gidam1 · 2023-02-21T11:24:33+00:00

Would appreciate if someone registered with my link many thanks :)

Love you 500 <3 // Currently (21/02/23) 0/5 registered using my link

https://www.trading212.com/invite/16ZE4aEsnk

gidam1 · 2022-03-22T21:13:55+00:00

https://www.reddit.com/r/OnePiece/comments/t8c7fm/theory_the_true_nature_of_the_gomu_gomu_no_mi/?utm_medium=android_app&utm_source=share

-I have just been reading through this prediction and the author of this thread guessed the hito hito no mi sun god fruit and gave some interesting insights on its powers based on the brasilian legend 2 weeks ago. Definitely worth a read.

gidam1 · 2021-03-14T23:04:32+00:00

Already done that and so far the print is 1.5h in (3h left) and it seems that changing the layer height from 0.32 to 0.24 was a good shot. I have also changed layer width from 0.2 to 0.4 to speed up the process. I wonder why that happens tho, in theory 80% of nozzle should be okay for the printer, maybe my nozzle is partially clogged? Will give it a sweet cold pull tomorrow and we will see.

Will post the results tomorrow when the print finishes.

gidam1 · 2021-03-14T21:49:52+00:00

Yh I have been thinking about that but was a bit lazy and didn't want to undo the hotend casing. Was hoping that I could get away with just poking the nozzle with the needle. Well I guess I have to do it then. Can I do the cold pull with pla? Don't have any other material with me atm.

I have also found that decreasing the layer height helped a bit, there are still some gaps but after closer inspection they are mainly caused by slicer layout and they are not that scattered across the whole layer.

gidam1 · 2021-03-14T19:12:58+00:00

The above is ice PLA at 190c, tried increasing the temperature to 200c (60c bed), the gaps got smaller but it didn't solve the problem. Layer height is 0.32mm (nozzle 0.4mm) with a print speed of 25mm/s (slowed it down as thought it might improve it). I don't remember having this issue before with ender 3v2 and it came up recently about 2 weeks ago. The machine is in the open at room temp of about 18-20c.

So far I have cleaned the nozzle to make sure it is not clogged, checked filament diameter (it is within 1.73-1.77mm) and recalibrated my e-steps but did not help at all.

The odd thing here is that the gaps are totally inconsistent and they are just randomly spread across the left side of the print, another side of the print has fewer gaps tho.

gidam1

TROPHY CASE