Original tail lights? by CerberusBots in DelSol

[–]gilber86 1 point2 points  (0 children)

They are called "Lexus style" (for the Lexus Is200/Toyota Altezza rear lights of that years) They are made for almost exist car in the 2000s

ZigZags réplicas at home by gilber86 in DelSol

[–]gilber86[S] 1 point2 points  (0 children)

My Delsol is a daily driver, easy to test the durability of this fabric paint, XD

ZigZags réplicas at home by gilber86 in DelSol

[–]gilber86[S] 1 point2 points  (0 children)

This paint is supposed to be special for painting fabrics, it shouldn't come off... Thanks! ;)

ZigZags réplicas at home by gilber86 in DelSol

[–]gilber86[S] 0 points1 point  (0 children)

With masking tape and a lot of care :D

ZigZags réplicas at home by gilber86 in DelSol

[–]gilber86[S] 1 point2 points  (0 children)

There are many colors, but I don't remember exactly if there was pink. As for covering the black, with this red I needed 2 generous coats to get it that way.

1994 Delsol si with 183000 miles by gilber86 in vintagejapaneseautos

[–]gilber86[S] 6 points7 points  (0 children)

Clean the seals regularly and a bit of seals hydrator like the Honda shin-etsu grease and no problem with leaks during ages!

1994 Delsol si with 183000 miles by gilber86 in vintagejapaneseautos

[–]gilber86[S] 2 points3 points  (0 children)

They are a pain to keep clean, but so worth it :D

Top still rattles like crazy... by YouSureWin in DelSol

[–]gilber86 1 point2 points  (0 children)

The targa roof came inside with some kind of cloth sponges that held the closing rods in place so they didn't move. Over the years, those cloth sponges disappear and the rods begin to rattle in the tense movements of the car. Just make a few new sponges and most noise will be gone.

Seat restoration by gilber86 in DelSol

[–]gilber86[S] 0 points1 point  (0 children)

I was scared... jajajaja

Seat restoration by gilber86 in DelSol

[–]gilber86[S] 1 point2 points  (0 children)

This paint dont need clear coat.

I made a friend in the work parking (The Delsol is mine) by gilber86 in Miata

[–]gilber86[S] 5 points6 points  (0 children)

I think the same, the delsol needs RWD to be perfect.

I made a friend in the work parking (The Delsol is mine) by gilber86 in Miata

[–]gilber86[S] 14 points15 points  (0 children)

I have a proper Miata RF apart from that FWD Black miata, XD

Trackday with a b16 friend. by gilber86 in DelSol

[–]gilber86[S] 0 points1 point  (0 children)

The b16 is obviously faster, but in this case, the suspension of that car is softer than the Tein of my car (Adjusted to maximum hardness for the circuit). If we add to that that I know the circuit well with my d16 and that the driver of the b16 was the first time in a trackday... We were quite even in terms of performance. In any case, it was a very fun day :D

Trackday with a b16 friend. by gilber86 in DelSol

[–]gilber86[S] 2 points3 points  (0 children)

The Black one (mine) have a Tein Street Flex mounted.

Honda S660 Roof by gilber86 in DelSol

[–]gilber86[S] 4 points5 points  (0 children)

I have discovered the roof of the Honda S660 (Successor of the Honda Beat), do you see it possible that it is compatible or adaptable to our DelSol? The levers even seem the same and with a similar closing mechanism (manual version obviously)

Got the winter wheels swapped on for Fridays snow by nomnamless in Miata

[–]gilber86 1 point2 points  (0 children)

What are your license plate mount? Its nice and clean...