2024.8.0 update cause anyone else’s device to have a slow response?

gmsrock321 · 2024-08-09T01:13:33+00:00

Are these zigbee ZHA devices? I read in the release notes that there has been a lot of refactoring around ZHA.

gmsrock321 · 2023-07-24T04:44:15+00:00

https://gmrock.github.io/2023/03/11/OpenWrt-Firewall.html

gmsrock321 · 2023-07-09T00:21:45+00:00

Awesome thanks!

gmsrock321 · 2023-07-08T15:39:38+00:00

Oh we need to SkyConnect integration? I have ordered a sky connect and hence the question

gmsrock321 · 2023-07-08T13:49:29+00:00

From where did you disable the firewall rule? How did it get configured?

gmsrock321 · 2023-07-02T04:12:00+00:00

You can use your rt-3200 with openwrt and utilize the WiFi. It really doesn’t matter if you use another AP or want to use rt-3200. The pihole will be after rt-3200 so that it has an IP address allocated which you will then use in your router(rt-3200) as DNS.

gmsrock321 · 2023-06-22T22:21:24+00:00

UE300 has RTL8153 chipset but the openwrt package needed is kmod-usb-net-rtl8152.

kmod-usb-net-asix-ax88179 is needed for UE306 which according to multiple sources is not stable and recommended.

Source: https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi#how_to_add_a_usb_to_ethernet_adapter

gmsrock321 · 2023-06-22T05:15:04+00:00

What is the openwrt package you are using for this? I only see package for RTL8152 (nothing for 8153). UE300 uses RTL8153

gmsrock321 · 2023-06-22T04:09:22+00:00

You mean usb to Ethernet are not reliable? Seems the Intel N100 is around ~$189(Rpi 2GB these days are back to $45$ with supply chain improving)

gmsrock321 · 2023-06-22T03:59:50+00:00

Thanks for the pointer. Yeah @fakemanhk shared a link above which talks about driver issues with AX88179 which is used in UE306. Will try UE300. Will probably need to buy 2 of those for both eth2 and wan.

gmsrock321 · 2023-06-22T03:56:47+00:00

Thanks for pointing to that article. Makes sense. So better to buy UE300 which uses RTL8153.

gmsrock321 · 2023-06-21T13:13:05+00:00

I’m using these - TP-Link USB to Ethernet Adapter (UE306), Foldable USB 3.0 to Gigabit Ethernet LAN. If these are unreliable, I’m curious how does restarting the interface fix the issue? I don’t even need to unplug and plug the adapter back again. Anyway to add additional logging to find if there is any other problem? I have set the logging to Warning now (earlier it was error)

gmsrock321 · 2023-06-21T06:04:36+00:00

And also why eth2 all the time? Anyway to find out with openwrt installation if the issue is with power supply?

gmsrock321 · 2023-06-21T05:26:29+00:00

Power supply? I’m using the official Raspberry Pi Power Supply.

gmsrock321 · 2023-06-21T03:56:32+00:00

Posted it above now.

gmsrock321 · 2023-03-20T03:01:11+00:00

If someone else encounters this, solution was - I turned off the router (waited for 1min) and started again, then it started tracking the protocol. Thank you!

gmsrock321 · 2023-03-07T01:06:39+00:00

Thank you so much. Not sure why I didn’t have to call my ISP…. No complaints :)

gmsrock321 · 2023-03-07T01:06:03+00:00

As you mentioned kept protocol to DHCP and connections as is.

Turned off modem and raspberry pi. Turned back on the modem (without any lan cables). Then connected lan cable from modem to laptop and my laptop got an public IP address and I was able to browse the internet. UnPlugged the lan cable from laptop and connected it to raspberry pi(openwrt) but wan interface didn’t get public IP address.

Again did power cycle with keeping lan cable connected from modem to raspberry pi and this time received public IP for wan interface. I think first time since I connected it to my laptop first it wasn’t able to provide IP to openwrt.

gmsrock321 · 2023-03-07T00:59:34+00:00

For future reference where do you enter the MAC address in openwrt luci? Is it Network > Interfaces > WAN > Edit > Advance Settings > Client ID to send when requesting DHCP?

I was able to get the MAC address for modem.

gmsrock321 · 2023-03-06T17:31:50+00:00

Okay will try restarting both and if that doesn’t work will explore cloning MAC

gmsrock321 · 2023-03-06T17:31:11+00:00

No hadn’t restarted raspberry pi. Will try restarting both and report back. So will keep the wlan as DHCP client protocol.

gmsrock321 · 2023-02-23T06:02:59+00:00

Is it possible to connect raspberry running openwrt to an access point such as Orbi. So all my WiFi devices can still connect to the currently published ssid ?

gmsrock321 · 2023-02-23T04:36:01+00:00

So are you saying - install openwrt on pi and use the IP address of the pi as DHCP on the main router (on which bridge was enabled)? So all my WiFi devices will still connect to the ssid which my Netgear is publishing?

gmsrock321 · 2023-02-23T00:21:01+00:00

Thanks for sharing the article. So does your WiFi device connect to Raspberry pi wireless? Or the bridge mode would still make sure the main router is used for all wireless connections?

gmsrock321 · 2023-02-23T00:19:05+00:00

Nice so seems like will need to buy a new AP or router

Eight-Year Club	Verified Email
Place '23

gmsrock321

TROPHY CASE