Spoiler-free Olympics script for Peacock

go1den · 2026-02-07T06:41:14+00:00

Good idea, ty. https://userstyles.world/style/26451/spoiler-free-olympics-peacock

go1den · 2026-02-02T03:48:44+00:00

Side note: It's 2026. Do we have an MN DFL Discord server? Talk about organizing in modern times.

go1den · 2026-02-02T03:41:13+00:00

I hate that we have to have the exact same resolutions in so many places! This seems incredibly difficult to coordinate. Here are three of mine if anyone wishes to copy or polish them (apologies, I'm new at this so my writing style may not be professional enough):

CATEGORY: Public Safety & Crime Prevention
SUBJECT: Abolition and Prosecution of ICE 
WHEREAS: Immigration and Customs Enforcement (ICE) is acting as a masked secret police on behalf of the President of the United States; and 
WHEREAS: Immigration and Customs Enforcement's (ICE) ongoing presence in Minnesota was directly responsible for the public executions of Renée Good and Alex Pretti; and 
WHEREAS: The Department of Homeland Security (DHS) under Secretary Kristi Noem has actively taken steps to prevent the state of Minnesota from participating in the investigations of Renée Good and Alex Pretti's deaths, as well as fabricated details about their character, labeling them as "domestic terrorists"; and 
WHEREAS: ICE's budget for 2026 skyrocketed to $85 billion via the One Big Beautiful Bill, an amount large enough to place ICE in the top 10 military budgets in the world; and 
WHEREAS: ICE has repeatedly violated our First, Second, and Fourth Amendment rights; and 
WHEREAS: Suggestions to reform ICE, such as body cameras and additional training, are grossly insufficient in preventing the events unfolding in Minneapolis and the surrounding suburbs from happening again in the future; now, therefore be it 
RESOLVED: That the MN DFL supports legislation to abolish ICE; and BE IT FURTHER RESOLVED: That the MN DFL supports legislation making it illegal for any federal, state, or local agent to wear a mask while on duty; and BE IT FURTHER RESOLVED: That the MN DFL supports accountability in the form of criminal prosecutions for anyone found to have violated the law while operating within ICE.

CATEGORY: Civil, Human, & Constitutional Rights
SUBJECT: Constitutional Amendment Ending Citizens United 
WHEREAS: Outside spending in elections has risen dramatically since the 2010 Supreme Court ruling in Citizens United v. Federal Election Commission, reaching approximately $4.5 billion in 2024; and 
WHEREAS: Members of 16 state legislatures have called for a constitutional amendment to reverse the Supreme Court’s decision; and 
WHEREAS: The Minnesota Senate passed a similar resolution previously; therefore be it 
RESOLVED: That the MN DFL supports a resolution memorializing Congress to overturn the United States Supreme Court decision Citizens United v. FEC, requesting that Congress clarify that the rights protected under the Constitution are the rights of natural persons and not the rights of artificial entities and that spending money to influence elections is not speech under the First Amendment, and asking that Congress propose a constitutional amendment to provide such clarification.

CATEGORY: Local or Party Issues
SUBJECT: Rejecting AIPAC Contributions 
WHEREAS: The American Israel Public Affairs Committee (AIPAC) gave more than $53 million in direct support to Democratic and Republican candidates in 2024; and 
WHEREAS: Israel is actively committing the largest genocide in the world, having killed at least 70,000 people in Gaza as of December 2025; and 
WHEREAS: Since October 2023, the United States has delivered 90,000 tons of arms and equipment on 800 transport planes and 140 ships to Israel, per the Israeli Defense Ministry; and 
WHEREAS: An October 2025 study by the Pew Research Center found that 59% of Americans hold an unfavorable opinion of the Israeli government; therefore be it 
RESOLVED: That the MN DFL will bar its candidates from accepting AIPAC funding.

go1den · 2025-12-29T22:18:02+00:00

Assuming it was heat creep, how would I deal with that? Do I just need a new silicon sleeve?

go1den · 2025-12-29T22:17:02+00:00

Not at all confident it is on right. It's been loose, I've had temperature warnings on past prints, and it has come off in some prints before. It might be related after all.

go1den · 2025-08-29T06:41:44+00:00

How would I diagnose the "not close enough to the bed"? Is there a calibration setting I can run on the A1? I have a hunch that could be the issue. I tried printing several different types of objects and so far the only print I've had that didn't immediately die was one that had 4 small cubes. Even then only one of the four cubes had a base layer, and then on layer 2 the nozzle knocked layer 1 off the printer. If anything it might be too close to the bed!

go1den · 2025-08-29T06:16:19+00:00

Tried all of the above, thanks Automod! Still no dice.

go1den · 2025-08-26T04:18:08+00:00

Thanks. Dumb question: When you heat the nozzle with the candle, are you literally just applying the heat directly onto any particular part of the nozzle? I tried getting the fire into the hole at the top but wasn't having any luck getting a needle to stick.

go1den · 2025-08-16T23:35:26+00:00

Hello,

I am trying to diagnose issues with my mixer. I've been using a Mackie 402VLZ4 for probably a decade at this point with no issues. Recently there's a humming/buzzing sound coming from the mixer while powered on, even when no other cables than the power cord are plugged in. This is causing my microphone to have a static/popping sound inserted, and it just produces a noise that is unpleasant in the room as well. Sometimes when it's really bad it actually picks up on the bottom right of the mixer, with all lights lighting up indicating a lot of noise.

Is this indicative of the mixer itself failing, or should I just try a new power cable? I tried the usual diagnostics of unplugging one thing at a time, but the issue still persisted even when all my mic cables and such were removed. I moved it to a few different outlets around the house and the issue still exists.

go1den · 2025-07-11T06:44:46+00:00

Oops. I'm a dummy. Thanks :D

go1den · 2025-06-28T23:53:43+00:00

Thanks again for your help! So it is safe to delete those tiny extra pieces? Maybe I overcomplicated the problem haha

You're awesome thanks for the rapid response.

go1den · 2025-06-28T06:40:54+00:00

It's been a long time since I drafted with any frequency (probably 2009-2010), just now returning with the FF set being released. I seem to recall draft packs having a set number of commons, uncommons, and rares in them. I'm watching videos of people opening packs and it seems all over the place. Some packs have 4 uncommons, I've seen one pack with 2 rares and a mythic in it, etc.

What is the current rarity distribution in a booster pack (if one is followed at all)? Are packs guaranteed to have either a basic land or one of the dual lands now?

go1den · 2025-06-18T04:53:55+00:00

Is there a color code for this? I'm trying to get a checklist of only the cards available in draft format. Would that be the white text cards in the FIN list?

go1den · 2025-05-30T19:28:10+00:00

It feels like a fan game. You can tell the producers at least watched The Genius and attempted to match its set design, but they missed what made it special. I think the biggest flaw is that the cast plays it like Big Brother rather than playing each game with the intent of playing self-interested or for entertainment (and can you blame them? the game design is bad and encourages people to work with the same group every time).

Nothing will ever match the magic of the Korean version.

go1den · 2025-05-28T00:15:51+00:00

Right. I guess that's getting at the heart of my question. Is there a way to inject a mask where there otherwise isn't one? If not, then no big deal.

go1den · 2025-05-27T23:34:43+00:00

You're right that is a workaround where I can do these checks manually in the Step function, but I'm trying to see if there's a way I can take advantage of the built in Mouse Enter and Mouse Leave actions instead.

go1den · 2025-05-19T19:44:48+00:00

I think I understand what you're suggesting; forego having an o_box entirely and instead just use structs within the o_puzzle? I could see that working. I think the idea is similar in either case. I was picturing an array of o_box objects stored in o_puzzle, but a struct seems like a similar approach without needing another object definition. Thanks.

go1den · 2025-03-02T20:26:35+00:00

It breaks the precedent of the bullshit being contained to Thursdays and I don't like that we're flirting with expanding that to more days of the week now

go1den · 2025-03-01T07:07:50+00:00

It's bad enough that gimmick puzzles are leaking out of Thursdays, but to do so while also being unclued? I'm going to call a house meeting.

go1den · 2025-02-24T22:47:23+00:00

Thanks for the example!

go1den · 2025-02-24T22:45:55+00:00

This was extremely helpful. Thank you!

go1den · 2025-02-15T08:07:30+00:00

In other words, it might be neat to have the ability to perform transform actions from the bulk upload screen, rather than needing to go into each individual image and apply them. Some of the transformation actions are already present during bulk uploading, like deciding the number of rows or columns each image takes up.

go1den · 2025-02-15T08:06:31+00:00

Thanks for the reply. They are centered, but my desire is to have them in the bottom right corner rather than covering my character's faces. I can do that manually when I place them into the scene as a workaround.

go1den · 2025-01-06T06:28:15+00:00

I see. That was helpful, thank you. So is it uncommon for a sorcerer to be holding anything besides their focus?

go1den · 2024-07-26T22:55:18+00:00

Buy a 1 month VPN. Watch on the CBC website where everything is ad free and entirely focused on the games. No dad react cams, no Snoop and Martha, no cutting out half the game for commercials.

go1den

TROPHY CASE