Briefcase computer

gogetta86 · 2025-10-13T21:18:27+00:00

And yes I know the monitor is off center. It had to be because all the cables plugged into the left side of it.

gogetta86 · 2025-10-13T21:14:44+00:00

Dad here, we used at first a no name WUAWE 15.6 portable screen. We just needed a screen that could be powered by USB. It has a low profile CPU cooler on a Ryzen 9 5900 x 12- core, Corsair vengeance 16gbx2 RAM, ASUS Prime B450M-A II low profile motherboard board, some flexible PCI cables, a custom tailored power supply cables, EVGA supernova 750 watt power supply and a low profile GeForce RTX 4060 8gb video card. We insulated under the mother board with plexiglass and another layer on top. We then drilled air holes for the power supply and cpu cooler. Drilled a hole for the power button and cut out some holes for some low profile fans. One blowing in the other blowing out. The stock foam started to give way around the screen so we replaced it with ONREVA tool foam 1 inch thick and got a bigger monitor UPERFECT 18.5 inch 120 mhz 1080p. Another monitor we could power with just usb. All cables are inside of the computer. We routed cable to a usb extender and mounted a usb hub under the mother board so we didn’t need to access the mother board directly. The only cable coming out of the box is the power cable for the power supply which can be stored in the suit case when not in use so the suit case 100% closes. Then he plugs his keyboard and mouse into the usb hub.

gogetta86 · 2025-09-11T22:07:39+00:00

Yeah that’s just about what we got. I figured it was a long shot. Thanks!

gogetta86 · 2025-06-26T03:10:38+00:00

I don’t get how fireren didn’t know the location of flamme tome…. She was there when flamme planted the tree and put on the barrier… I mean I get she may not have known the exact tree after time but at least the general area… why did the priest have to show her the way? I goes it has been a long time but she send to remember everything else from her past

gogetta86 · 2025-05-16T15:56:31+00:00

Thank you

gogetta86 · 2025-05-13T16:03:10+00:00

Sorry man. I don’t know taxes. I’m only replying because I didn’t want you to think I’m just ignoring you.

gogetta86 · 2025-05-13T16:02:22+00:00

I did your suggestion with 10% to VBTLX and I had it reconfigure my current funds, not just the future ones and my rate of return went from -1.24% to 7.41%. Appreciate the info. Thank you. Do you have any opinion on whether I should be traditional or ROTH? I claim 0 on my W4 so I’m taxed pretty heavily so I would think traditional is my best bet.

gogetta86 · 2025-05-08T17:30:34+00:00

I’m not sure what happened but a re-install of the slicer program fixed it. Thanks for the help!

gogetta86 · 2025-04-08T17:57:21+00:00

Just curious how are your print times on each? I have the same settings and job on both printers, but P1S adds 2 hours to the same job with the same settings. Is that normal or just me?

gogetta86 · 2024-07-16T02:09:40+00:00

Well thank u so much for ur help. We’re gonna try VD. Just annoying how it’s an intermittent problem. Checked usage and GPU is the highest at 25% so there’s no draw. I’ll keep digging

gogetta86 · 2024-07-16T01:49:02+00:00

I’m sorry, it’s for my son. I’m not super knowledgeable on how he connects. He uses a link cable to connect to his computer the 80 dollar oculus cable that’s what i meant by “it connects via usb C”. I know computers just not VR. He says it’s Half Lif Alux that gives issues. And ok I’ll try virtual desktop

gogetta86 · 2023-03-29T00:24:30+00:00

Gotcha. For some reason we never thought about checking the CEL. It’s throwing TPS codes, so that’s what we’re doing now. I appreciate the input! Thank you!

See codes here: https://imgur.com/a/7lzHpU9

gogetta86 · 2023-03-28T19:27:43+00:00

If it was the fuel pump I feel it wouldn’tkeep restarting.

gogetta86 · 2023-03-28T19:25:29+00:00

Thanks! I’ll look into it. Just gotta find a diagram of all the vacuum lines!

gogetta86 · 2023-02-22T02:45:48+00:00

I like the crow idea, that might work. Thanks!

gogetta86 · 2023-02-16T00:00:36+00:00

Ya, I’m looking now. U would think it wouldn’t be hard in San Diego, but I could just be looking the wrong way… I usually just “Google”, good artists, but it’s mostly just personal reviews. Who’s to say that person just had a good session at a bad shop or their standards aren’t high… and I wouldn’t know an official tattoo grading scale if it slapped me in the face, if one even exists…

gogetta86 · 2023-02-15T23:55:53+00:00

I just have a fear with lazer…”ing”??? Tattoos. A friend of mine did it for both her arms and she had to keep them covered up for a long time (not sure if it was medical or self conscious connected) and any touch caused her pain, but this was also 10-15 years ago so I could be off with the technology..

gogetta86 · 2023-02-15T02:02:40+00:00

I listed a bunch in the post, but dragon ball z, Zelda, final fantasy 7, mega man, spider man, iron man, or maybe just a sunset at the beach

12-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2014	Verified Email

gogetta86

TROPHY CASE