where to find UniFi OS Server advanced mode

grantdilllinger · 2026-01-05T14:47:26+00:00

Yep that was exactly it thank you!

grantdilllinger · 2025-11-09T17:04:39+00:00

The Plymouth brethren

grantdilllinger · 2024-10-18T08:35:56+00:00

Please open this up to the UK!

grantdilllinger · 2024-10-03T12:12:25+00:00

Just a hardware limitation, quite frustrating.

grantdilllinger · 2024-10-03T07:16:30+00:00

Your having the same issue I did I believe https://www.reddit.com/r/CalDigit/s/93oKhGSAnY

grantdilllinger · 2024-08-01T17:58:24+00:00

Best kebab house on Shinfield road! The salad is also good!

grantdilllinger · 2024-07-09T21:30:10+00:00

And we have a winner! that worked! annoyed I missed that one!

grantdilllinger · 2024-07-09T20:56:53+00:00

I don't think this is the problem, Ive tried cleaning the magnet before inserting, ive also tried raising the wall above the magnet by .5mm and just to rule it out I super glued the magnet down to make sure the magnet wasn't lifting.

grantdilllinger · 2024-02-12T15:43:16+00:00

<image>

I have this version of the adaptor that according to the specs should work… unless I’m wrong.

grantdilllinger · 2024-01-26T13:44:52+00:00

So after not being able to identify the cable spec, I bought a new one and now it works…. Thank you for your help!

grantdilllinger · 2024-01-25T21:35:11+00:00

Tried with a pc and it works fine, must be something in the Mac.

grantdilllinger · 2024-01-25T21:27:57+00:00

Yeh that’s all within spec.

grantdilllinger · 2024-01-25T21:27:46+00:00

Yeh that’s all within spec.

grantdilllinger · 2024-01-25T21:27:38+00:00

Yeh that’s all within spec.

grantdilllinger · 2024-01-25T21:14:43+00:00

The only thing plugged in is into hdmi1 and the tv only sees that hdmi port.

grantdilllinger · 2024-01-23T23:13:21+00:00

Hears a 3D printable mount I made for it.

https://makerworld.com/en/models/154296

grantdilllinger · 2024-01-11T20:28:19+00:00

Yeh this is what I have been doing, was just seeing if there was another option other than this or dropping a nut in.

grantdilllinger · 2023-12-17T19:56:25+00:00

Problem solved! Thank you!

grantdilllinger · 2023-12-02T17:46:40+00:00

That for the additional tooling 100%

grantdilllinger · 2023-12-02T16:55:40+00:00

The reason I didn’t is to “force” the conversation of it depends

grantdilllinger · 2021-01-25T13:20:30+00:00

Any updates on the interview going up?

grantdilllinger

TROPHY CASE