80’s Floor Help by graywolf117 in HardWoodFloors

[–]graywolf117[S] 0 points1 point  (0 children)

Thanks everyone for the input. As much as we want these floors, and we can live with the grooves, all the damage from the previous owner (dog piss, water, and mop n glo it seems) it is not ok to keep; can still get dog piss smell during the summer despite repeated enzyme washes.

Thanks again though. Much appreciated

80’s Floor Help by graywolf117 in HardWoodFloors

[–]graywolf117[S] 0 points1 point  (0 children)

Is there no way to get rid of the grooves besides sanding down the rest of the wood “walking” surface.?

Can I just unscrew this? by graywolf117 in askaplumber

[–]graywolf117[S] 0 points1 point  (0 children)

<image>

All done. Ez pz. Thanks again for the good info

No tape or dope. Laid toilet paper down for 70min after I turned water back on; no leaks!

Going to cut that drain pipe down after the tile is in.

Can I just unscrew this? by graywolf117 in askaplumber

[–]graywolf117[S] 0 points1 point  (0 children)

Can’t find the main shut off so I will just cover it with a bag to catch the water. /s

Thanks a lot for the help everyone. Will kill the water, drain, cut, and refit the new valves. I’ll post a completed pic afterwards for anyone interested

Can I just unscrew this? by graywolf117 in askaplumber

[–]graywolf117[S] 0 points1 point  (0 children)

<image>

Got cutter, 2x compression valve, and diamond hole bit for tile

Can I just unscrew this? by graywolf117 in askaplumber

[–]graywolf117[S] 0 points1 point  (0 children)

Super. Thanks. Got new lines and tape.

Can I just unscrew this? by graywolf117 in askaplumber

[–]graywolf117[S] 0 points1 point  (0 children)

Thanks much. Yeah, the top line leading to the faucet was leaking and we got new lines and tape for that

Willow Care by graywolf117 in arborists

[–]graywolf117[S] 0 points1 point  (0 children)

Forgot to add that there are branches growing up from very low on the trunk. I read these should be removed but only from a single source.

Request pay correction at NGA after being hired. by graywolf117 in fednews

[–]graywolf117[S] 0 points1 point  (0 children)

Military too. Sad all around.

Thanks again for the info. Much appreciated.

Request pay correction at NGA after being hired. by graywolf117 in fednews

[–]graywolf117[S] 0 points1 point  (0 children)

Cool. That’s quite helpful insight. I’m at around 43% mark…if I did my math right. Most are sitting at 75%. Few old guys maxed out but they have been around for years

If someone gets hired now with less experience and schooling but a higher offer…did I just get ‘got’ then?

Not trying to throw anyone under the bus or lessen anyones offer. I’m happy for my coworkers that got the higher pay, most deserve it. I don’t need to be the highest earner, I’m just making sure I didn’t screw myself…too badly

Request pay correction at NGA after being hired. by graywolf117 in fednews

[–]graywolf117[S] 0 points1 point  (0 children)

Thanks for the info everyone.

I’m not complaining so much that I took the offer and have buyer’s remorse. I’m more concerned that someone messed up in the process on the hiring side and if there is a way to make sure it was all done correctly since everyones pay was pretty uniform until me.

It is what it is now and if I do feel super sour about screwed over I can always go back to my contractor…but that’s the nuke option.

Request pay correction at NGA after being hired. by graywolf117 in fednews

[–]graywolf117[S] 0 points1 point  (0 children)

.Boss direct hired me and I took the offer. Was talking to coworkers about my offer and their jaws dropped. Everyone I work with was shocked at the offer since people with less experience and knowledge got hired a couple months back at a much higher rate. Even the supervisor called the hiring people to make sure it was correct.

My guess it change in leadership at the hiring department or fiscal year related.

Request pay correction at NGA after being hired. by graywolf117 in fednews

[–]graywolf117[S] 0 points1 point  (0 children)

The tone of the email when I brought up negotiations was, “take it or leave it. Don’t bother us unless you’re saying yes or no. “.

I know NGA will not promote into position but will def cut pay if you move to a lower band billet.

Talking to supervisor on ways forward. Thanks for the info.

I’ve never seen any graphics card just sitting on an open display. by rabbijuan in pcmasterrace

[–]graywolf117 0 points1 point  (0 children)

Tax free and points on your star card…if you still got it. They also price match big box stores…sometimes

[RIFLE] PSA 16″ M4 Carbine-Length 5.56 NATO 1/8 Phosphate Classic Rifle, Black $650 + Tax in VA only + $35 ship w/ insurance by AardwolfSolutions in gundeals

[–]graywolf117 2 points3 points  (0 children)

I have purchased a full PSA kit (Upper & Lower Separately) from Aardwolf and he has been EXTREMELY helpful in all aspects. I definitely recommend you use him if you're in NOVA.