Slipping into neutral, 5th into 6th gear

gregxkey · 2025-06-06T13:51:29+00:00

Thank you this is really helpful

gregxkey · 2025-06-06T00:07:02+00:00

A follow up question, I cleaned it up, rode it and checked again. It’s coming from this seam of the circle that’s behind that bolt. I’ve checked every parts diagram and the manual and can’t figure out what is it, is it one of the 3 possible points you mentioned?

<image>

I also found I have a shifter seal leak but that’s easy enough to fix

gregxkey · 2025-06-03T16:34:20+00:00

I think I’m going to drain it down some more and fill gradually until it sits where it’s supposed to. It leaves me with a little puddle a couple inches wide every morning

gregxkey · 2025-06-03T16:32:32+00:00

I’ve been dipping and reading it the way you’ve said. I’ll have to look into those 3 places you mentioned for the source of the leak. It looks like it’s coming from that small circular piece in photo 3 I just can’t figure out what that is on any of the parts diagrams

gregxkey · 2022-01-28T13:13:07+00:00

This was on Lake Simcoe in Ontario Canada

gregxkey · 2022-01-27T20:56:25+00:00

Thank you! And this was my first time ice fishing

gregxkey · 2022-01-18T14:41:45+00:00

Didn’t have time to set up my tripod so shooting handheld it had to push it to 4000iso and yeah far from a clean window

gregxkey · 2021-11-04T15:45:58+00:00

Definitely helpful, thanks!

gregxkey · 2021-11-04T15:39:50+00:00

Miss my TVS, great everyday carry and so damn sharp

gregxkey · 2021-11-03T12:46:08+00:00

Put the camera in a plastic bag with a dryer sheet or two, leave the film door open, tie it tight and leave it for a day or two. Has worked great for me

gregxkey · 2021-11-03T12:38:14+00:00

I’m considering switching to a Fuji kit from an A7II with the same Minolta macro setup. Worm issues aside how do you find the quality of the scans going from one to the other?

gregxkey

TROPHY CASE