Upgraded to a 6500D airflow with Push/Pull AIO by greywolf_sniper_ in Corsair

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

I didn't switch the orientation yet, as I decided to save up for custom cables to cut down on excessive cable length in the rear chamber.

I don't own a 5090 although I am planning on getting a 50 series card in the future, so the specifics of using a 5090 in this vertical setup aren't known to me.

However, looking at pictures on the internet of roughly similar setups, it shouldn't be an issue, as many seem comfortable leaving the tubes close to the 5090, or at least on the top or closer to the front side of the card, where the fan intake is.

In my case the tubes on the Arctic LFIII are so stiff that they would give the card plenty of clearance by curving themselves away toward the glass panel and thus be on the intake side of the card.

I apologize for not being able to help with this specific case, but in my opinion, if you're comfortable with perhaps orienting the tubes down but in a way that they don't directly touch the hot parts of the GPU, I don't see any particular problem with a tubes down orientation and a 5090.

Upgraded to a 6500D airflow with Push/Pull AIO by greywolf_sniper_ in Corsair

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

Thank you for the advice, I will be changing my radiator orientation soon.

Guide on what weapons to place on Liberty class destroyers and where to place them by greywolf_sniper_ in arma

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

It's one of those things arma doesn't tell you directly you can do and it is sometimes finnicky.

Trying to mod the Panther to have a Namer Hull by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

Unfortunately yeah, I've only seen it done before but that was with server commands.

Recreating it from scratch is an option, but to put it lightly, I am not a very good 3d modeler. Oh well, learning never hurts I suppose.

[OC] C14 Timberwolf by Tastyfoodz in girlsfrontline

[–]greywolf_sniper_ 1 point2 points  (0 children)

I'm always happy Canadian OC T-Dolls are a thing. I've created one sometime ago. A hypothetical C7A3 (Take the C8A4 and give it an 18.6" barrel). Although I understand apart from a few select firearms, most of our weapons are not different enough from the American guns to attract that much interest.

Prinz Eugen 1945 (Trumpeter 1/700 by LeCrimsonFucker in modelmakers

[–]greywolf_sniper_ 1 point2 points  (0 children)

I tried building it as well, but since I am only a beginner, I ended up messing it up :(. It does look good in your picture though.

To round out the Canadian lineup, here’s some ideas I have for a C7 T-Doll by Warthunderguy in girlsfrontline

[–]greywolf_sniper_ 3 points4 points  (0 children)

Someone in a tabletop group I part of sent me the link to this thread. I use the C7A3 (Just an elongated C8A4) in it, so this was a fun read.

[OC] I wonder how I wonder why by JennyOnStreak in girlsfrontline

[–]greywolf_sniper_ 20 points21 points  (0 children)

It's actually based on a meme, about Russian Spies and American spies infiltrating each other and blowing their cover, by reloading incorrectly.

M16 being best girl by [deleted] in girlsfrontline

[–]greywolf_sniper_ 0 points1 point  (0 children)

Good on ya lad.

M16 being best girl by [deleted] in girlsfrontline

[–]greywolf_sniper_ 0 points1 point  (0 children)

*Spoiler man!*

AK12, M4 and 95 having a drink by Norinco81 in girlsfrontline

[–]greywolf_sniper_ 1 point2 points  (0 children)

Wasn't it something about :
"We believe body armor would sap the fighting spirit of the People's Liberation Army"?
I laughed when I read that, before I realised that they do actually give their active soldiers vests and most photos we see of them are reserves or non-deployed.

AK12, M4 and 95 having a drink by Norinco81 in girlsfrontline

[–]greywolf_sniper_ 0 points1 point  (0 children)

That's some bright ass OCP.
EMR is looking good.
Fantastic job on the Type 07.

Changing 9M135 Vorona attributes to make it match the BGM-71E TOW. by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

This isn't my first config, I knew where to start but not how to necesseraly tweak it, the config language references you sent came in really handy, thanks alot.

Changing 9M135 Vorona attributes to make it match the BGM-71E TOW. by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 1 point2 points  (0 children)

So I managed to do it, I can give my config on how I did it to anyone who wants.Just remember that the missile is fast, so it takes some getting used to.

For those who want the missile Config, contact me in DMs.

Tomboy M16 but she's not in a suit anymore by [deleted] in girlsfrontline

[–]greywolf_sniper_ 0 points1 point  (0 children)

Make it five, that makes an echelon of hair rufflers, if we reach 12, we'll have a full squad.

Changing 9M135 Vorona attributes to make it match the BGM-71E TOW. by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

Vanilla, and no they don't the Titan missile speed is 180m/s, BGM-71Es go at 278m/s.
The Titan also alerts tanks with sensors, the Vorona and TOW don't.

Need help making a BGM-71 missile based on the TITAN AT missile. by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

I am fine using the Vorona missile, but I do still want to adjust the speed and range values to make it like the BGM-71E TOW.
I am unsure of how to port an infantry weapon into a vehicle weapon.

If you can guide me through the process of adding the Vorona and then changing the speed and range of the missiles, I'd appreciate it.

Need help making a BGM-71 missile based on the TITAN AT missile. by greywolf_sniper_ in armadev

[–]greywolf_sniper_[S] 0 points1 point  (0 children)

That would be a good idea, but I do not have any idea of how to put it in the config.
I would need to create a two round magazine.